HP 15-af131dx: laptop does not start from usb flash drive


Hello:

A few suggestions you can try... If they do not, unfortunately, I don't have any other suggestions.

1. go into the BIOS and enable mode inherited, that must disable secure boot.

2 boot from a USB 2 of the laptop ports.  It won't boot from a port USB3.

Tags: Notebooks

Similar Questions

  • x 61 does not start from usb flash drive

    I don't know that I did several times before, but for some reason any my x 61 does not allow me to boot to a usb flash drive, I use normally to install the operating system.

    Any suggestions what might be wrong and what I could do about it?

    I should mention that USB is enabled in the BIOS and usb flash drive install works on other computers.

    Update seems to be an incompatibility with wintoflash, I used the Microsoft DVD/USB tool and it starts the flash player and finished the installation. Strangely the wintoflash installation worked fine in a HP dv3000.

    Consider this resolved.

    Wow I never saw your post until that earlier.

    Situation is resolved in the first post

  • Win 7 Backup and Restore does not recognize the USB flash drives.

    Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

    Back up and restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    You can't save backups to a flash drive, you need an external USB hard drive.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • My C50 - B Satellite does not start from the HARD drive

    Details of the machine: -.

    Model number: PSCMLA-03F07Q
    Serial number: XE343127P

    Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

    Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

    I reduced the possibilities to a fault of BIOS, reasons.

    System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

    The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

    1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

    Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

    Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

    I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

    See you soon,.

    Andrew.

    Hello

    From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
    HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

    What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

    Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

  • Satellite L300D - 12L does not start from CD/DVD drive

    Hello.

    I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
    I also have this problem with my daughter satellite.

    It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

    I tried several discs with similar results.
    Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

    Any ideas greatly appreciated.

    Hello

    Have you tried to boot from the recovery disk Toshiba?

    Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

    That's why check first before you would contact any ASP guy to replace the STRANGE.

    See you soon

  • Windows does not recognize the USB flash drive

    Hello
    My USB does not work when I plug. It seems that Windows recognizes the device because it is found in the Solution Explorer window, but if I want to create a folder or a file on the USB key I have the following message:
    "Cannot find this article.
    It is no longer in < %3="" null :="" optext=""> . Check the location of the components and try again. " < br=""> also the files that are copied to the USB flash drive are not visible in Explorer and it looks like the drive is empty.

    I want to emphasize that the same (Kingston) USB flash drive works perfectly under Windows XP operating system on another computer so it may not be a problem with the device. The same problem also appears when you use a different USB (another manufacturer).

    Thank you!

    Hey, 101 a.

    , I just posted a fix I found for my USB flash/go to work again.  It was a very simple solution, too.

    I unplugged all USB devices first, then tried my USB jump drive again.  IT WORKED! I've narrowed the problem to the new printer that I use.  It's a Mono Dell Laser MFP 1125.  Whenever it is plugged into a USB port, my USB doesn't work.  All other devices work, but not the USB is the printer is connected

    I don't know what done to block the flash/USB key, but unplug printer allows the jump command to work again.  I will contact Dell on what did the printer driver to block the flash player.  Just an info on the fix I found.

  • Dell DataSafe - 'Create System Recovery' does not recognize my USB flash drive

    Hello

    I just set up my new laptop Inspiron and 'Dell DataSafe Local Backup Basic Edition' pops up advising me to "Create system recovery media" restore my system to its critical failure of hard disk factory settings.

    It gives me the option to save this on a disk or a USB Flash drive.  I have a drive hard laptop "Western Digital My Passport Essential' that I would use for this, that's why I chose the option of USB Flash drive.  However, I get a message "no USB key not found.

    Can someone tell me what I need to do to store the backup recovery system on my laptop hard drive?  (I know a recordable DVD will be probably easier, but I did not and do not want to buy a bunch of them just for that!)

    Any notice received with gratitude.

    Thank you

    I think you may be stuck. It may be opposing on the hard drive because there are already data on this topic.

    You have a friend that can give/sell you a blank DVD?

    Ron

  • XP does not start from the hard drive

    I have an old pc under win xp. It does not drive start hard when it starts. I always have a cd/dvd in master dvd for it to start windows players. Can anyone help?

    herikhi

    Hi herikhi,
     
    Change the start of the base system (Input Output) BIOS setting to boot from the hard drive.
     
    Consult the manual of the manufacturer, to do the same thing.
     

    NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  • Satellite C870D-119 does not start from CD/DVD drive

    I changed the boot sequence in the BIOS to the optical device is referenced to boot the system before the hard drive. The bad news is that the CD player is started but after 30 seconds, the system hard disk takes over and starts Windows 10.
    I need to create a full backup of the system offline.
    How can I make the labtop will boot from the CD drive?
    Thanks for any help.

    What is on the CD?
    If the CD is MSDOS, Vista or XP or Win7 based, you must set the startup Boot of MSC mode.
    If the CD has Win8 or Win10 then you start in UEFI boot mode.

  • A220-1 satellite has 9 does not recognize the USB Flash drive 4 GB

    Hello

    I bought a new USB (attachment 4 GB) Flash drive.
    And I had a problem installing it.
    The same drive Flash was wel work with my friends laptop that has windows XP only.

    Someone of you can give me a solution for this problem.

    Concerning

    François kervevan

    Go to the nursery of the device and remove all USB Device Manager USB controllers and root hubs ports!
    Restart the laptop and after the new installation of USB port try to connect the USB 4 GB drive again.

    Good luck

    By the way; If you use Vista on your laptop, please update the last State and also install this patch:
    http://support.Microsoft.com/kb/941600/en-us

    Good bye

  • Y480 - laptop does not start with attached hard drive enclosure.

    My laptop started clicking and will boot LAN, so I opened it and looked at the hard drive. All seemed well, it wouldn't be fair to start. Then I removed the metal casing around it and stuck the drive in. Everything started normally. Chkdsk shows nothing wrong with the hard drive, and I'm not sure why remove the dressing would affect startup. All the thoughts/solutions?

    Blue... temporarily parts of the sponge to keep the HARD drive in place.

    and if your Y480 is still under warranty, can consult a Support technique Lenovo...

    http://support.Lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

    Good luck... Zehn

  • WIndows 8.1 does not start from the HARD drive

    Put a new WD HDD in a Samsung laptop. Install windows 8.1 form DVD and restart get an error "tried all options press F4 to start recovery.

    He wants to boot from the DVD, but I have the HARD drive as the number of boot option in the bios. What's new?

    The symptoms you describe seem to indicate that the startup information has been lost of the HD.  The HD is faulty or something destroys the startup information.

    Try to do a repair from the installation DVD.

  • Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

    I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

    Hello @SPKaler,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

    From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

    HP computers - performing a recovery of system HP (Windows 7)

    You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • HP-gs61-110sa: help! laptop does not start

    Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

    Hello

    If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

    Windows 7 64 bit

    You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

    One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

    When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

    Bootrec.exe

    bcdedit/export C:\BCD_Backup

    c:

    Boot CD

    BCD attrib s h - r

    Ren c:\boot\bcd BCD.old

    Bootrec /RebuildBcd

    Bootrec /fixmbr

    Bootrec /fixboot

    Remove the CD from repair and try to restart the laptop.

    Kind regards

    DP - K

  • Laptop does not start &#62; how to delete data

    Separated from this thread.

    How can you get your data off when the laptop does not start again? "catch fire or explode"... in a suitcase on a train or plane? This sounds like a product ready for the market yet? More I explore this question of "overheating" in the line it worse it seems: my machine was like a hot plate not a laptop when it has been completely unfolded in a cool room: about right to mention briefly without getting hurt. (And my data is still inside of her, if it is not melted...)

    Well, unlike a laptop where you can remove the hard drive, these tablets are pretty well fixed and specifically your case, (it will not explode or catch fire) is to locate the device next to an air conditioner or a blowing unit to blow fresh air into the vents.

    At this point, press on and hold the volume button upwards and at the same time, press and hold the power button for about 15 seconds, then release it.

    If you can get it to feed and at least screen troubleshooting, see if you can get the machine to run in safe mode.

    If you can get to the desktop, you can down all your data by opening the file manager, click on 'This computer' and open the 'users' folder, go to your account name folder and copy all the files on a USB key.

    It is the only way to get your data out of these tablets.  You can't have the SSD card to remove it to try to force the machine to run at least once.

    Now, I think that your machine is still active, just overheating.  Get off in any case data.

    A RESET and reinstall updates are the only thing you can do.  I have the i3 model myself and am on it now and no problems with it.  Some games will heat, but never to the point that everyone is a report.

    If all fails, send the replacement machine.

Maybe you are looking for

  • the added module, malware came with it, ads everywhere in facebook, cannot display my modules to remove it

    yesterday, I added DoNotTrackPlus to my Add-ons. as he came to malware: Coupon Companion. It blew my account facebook with ads. I tried to remove it from modules but am unable to see my Add-ons to do. I ran malware removal tools. It's still there. ca

  • Negative binary input

    Forgive me, isf, that he answered elsewhere, but my colleague and I struggled to find an easy way to import a binary an API number when it is negative. It uses the method of compliment of 2 (IE + / 2 ^ 15 with the first digit of the 16-bit number tha

  • XY-graph, constant real time of 30 minutes interval

    I want to create an XY Chart with a time interval of 30 minutes. X - minimum scale should be the time that the program starts and the X-range maximum 30 minutes from starting point. Example: From 10:00 program: the chart must be on the scale of 10:00

  • IOS XR. When absolute refpoint is created in the primary persistent configuration file?

    Hi all Can someone help me understand during the creation of the absolute refpoint and what determines that a certain place in the persistent configuration file becomes an absolute refpoint? The foundations of the IOS XR States that 'an absolute refp

  • T41p - no display / refuses subsequently turn on

    Hallo, I would like to know what is the problem with an old book of mine. It was having the problem do not display anything (bending), but this has been fixed 2 years ago. Now, it does not display anything that in each case it does not start if no ex