HP 15-Ay007la: Wi - Fi does not detect wifi access points. HP AY007LA downgraded to Windows 7.

Similar Questions

• Laptop does not detect WiFi or USB

  My laptop was running on Windows 8.1 and I decided that I wanted to go back to Windows 7. I installed Windows 7 Ultimate, but now my laptop does not detect my Wi - Fi. I thought I should just update the driver associated with a wifi adapter but it does not detect my Flash drive either. I tried to reinstall Windows 7 and Windows 8.1 but I still have the same issues. Help?
  
  Quick notes:
  Computer: HP DV7
  Operating system: Windows 7 Ultimate

  Using HP recovery for your computer media, he would return to a factory State... including all partitions of the plant, operating system, drivers and HP software. The HP recovery media should solve all problems, except those that are from the real hardware.

  Otherwise, you can download the drivers from the page that was provided and install them. Once again, just after the "Hardware ID" string for any unknown devices.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite L650 does not detect wifi networks

  My laptop Toshiba Satellite L650 ceased to detect wireless networks.
  It shows only Dáil and vpn...

  The wireless network is not detected.
  I was able to connect to the network using my phone, so something was wrong with the laptop.

  I also checked if the broadcom 802.11n works or not and it appears as works perfectly.
  But don't detect is not wifi networks.

  Could someone help me with this?

  Wireless network card is enabled?
  Is WLAN led on when you use the FN + F8 key combination?

• Aspire ES1 does not detect wifi networks

  After a frustration of a few hours, I turn on this forum to help you, please. Ours is not a unique problem, but further discussions on the same issue did not provide enough help.

  Until this morning, the Aspire had only undetected (and connected to) our home wifi network, but has detected nearby wifi networks. Now, he finds none. Our other four devices continue to connect as usual.

  We looked at the list of devices under "network adapters" and in this list, according to the Acer support page, we should have two cards among others here: Ethernet card for wired and wireless network adapter. It is not present.

  We do not know how they came to be "lost" or how we can restore them. Any help would be appreciated and please keep in mind we are reasonably computer, but not technicians.

  Or should I just send the wretched machine back?

  In this case, it is recommended to run the system restore to restore your system to a point in time when your wireless network worked very well. To learn how to perform the system restore, you can check the link below:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Hope this will help you.

• WCS does not see any access point, but see the 4400

  I have WCS, A 4400 and 1130ag access points. WCS see 4400s but none of the ap

  Hmmm... Is it APs running in stand-alone mode or lwapp? They must be using lwapp (lightweight) to be controlled by the regulator

• 2000-2120TU HP laptop: Wifi network does not detect

  Hai,

  Recently I reinstall windows 7 on my laptop. Now it does not detect wifi networks.

  Hello:

  Have you installed the driver for the wireless card?  Otherwise, you must...

  This package provides the driver to support the Atheros Wireless LAN card in the laptop models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56572.exe

  You also need the bluetooth driver for this model wireless network adapter.

  This package contains the driver for the Atheros Bluetooth 4.0 installation package + HS in the laptop models running an operating system supported.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56573.exe

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Tecra Z50-A-11V: new SSD but earn 8.1 does not detect

  We bought a M550 Crucial 256 GB drive and you want to replace in a Toshiba Tecra Z50 - Av1

  We don't want to make any transfer of data or cloned.
  We want to do a clean install with Windows 8.1
  The BIOS recognizes the SSD

  But when you install Windows 8.1 doesn't detect any disk connected to the device and asked additional drivers. Windows does not detect the drive

  https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
  https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
  https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

  I have also tested with version lasted this driver (old F6 to start to locate the hard disk driver)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapk w = f6flpy-x 64.zip

  and with toshiba package
  http://support.Toshiba.com/support/viewContentDetail?ContentId=4004211
  You can see that I have the version 3.20 BIOS. Interestingly, I see that the last one is the Toshiba has released version 3.1

  But still the CRUCIAL drive is not recognized by the instalation of windows startup

  The problem is similar with ubunto, kubuntu,... the drive is detected by the BIOS, but not for the OS.

  any help?
  Thank you

  Hello

  You solved this problem?
  Could you install system 8.1 Windows on this SSD drive?

  I think that the installation of additional drivers during the setting procedure isn't necessary since Win 8.1 should already contain pilots essential.
  From my point of view of the few, there could be a compatibility issue (maybe the SSD firmware update could solve that problem).

  What another SSD disk usage? You have the same problem with other SSDS from other manufacturers?

  Your comments would be appreciated.

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.