HP 15-ay007tx: indication of power LED button is not all flashing or a glow
Hello
I bought hp 15-ay007tx a few days back, which is installed with Free DOS 2.0. I installed Windows 10.
I bought it online when I first click on the laptop power button, the light inicator light flashes not or not glown even after installing windows 10, always the led on the button works / stop does not work, I installed the latest on the site drivers hp driver.
According to design any led light supplied with switch / stop for this model. I confirmed with a technician.
Tags: Notebooks
Similar Questions
-
The power supply is turned on, and all voltages are correct (measured). The fan turns on when you press the power button and I can feel the rotation of the disk and it's hot. I stripped naked essential system, nothing that the keyboard wireless & mouse, HDMI connector to monitor. I cleaned all the dust from the inside of the computer. I reinstalled the CPU chip. No beeps at all coming from the motherboard. The heatsink is stone cold. I suspect either chip CPU & and/or motherboard. Anyone have any ideas?
Replaced the motherboard. Problem solved.
-
The multimedia touch panel on Satellite A500 buttons are not all workers
Hello
I recently bought a laptop computer (PSAR9A-02J001) A500 under Windows 7 (32-bit) Home Premium. Not all the albums multimedia touch panel buttons work. When the buttons are pressed, brands of laptop beep (which is normal) but the corresponding function is not executed.
For example, the Eco button above is not put in power the eco and the mute not to cut the sound.
Device Manager shows all devices as working properly.
There is no errors in the Event Viewer Application or system logs.Please advise!
Thank you
Hello
Try please reinstall extra package from Toshiba.
Remove the preinstalled version, restart your computer and install the latest version of the Toshiba download page. -
InDesign Cs5.5 Scrollbar, pallets and tools locked buttons (but not all) bar
Would be - this: panels and InDesign tools answer not to the clicks of the mouse (Windows 7/Vista)
-
No Admin Page and power Reset button do not work.
I use a Readynas R104 with 6.4.2 firmware. The last 2 days, the administration page refuses to appear from a web browser, and when you try to restart via the power button, nothing happens (no information on the front panel display, when pushed power button / stop). Actions are always accessible from Windows Explorer, and I can still read and write to the actions. The first time this happened, I shot the seizure of power to restart/reboot, but don't want to continue to do that for fear of screwing up the system. Has anyone had this problem with 6.4.2 and if yes, how bypass it without risking a coercive power shut down for reboot?
Problem seems to have disappeared, stable performance for a few days.
I'm on OS6 and I of newspapers from when the problem occurred. You want them?
-
SHIFT LOCK and Numlock LED button does not work
I have a HP G72-B66us laptop and light on my LOCKING of UPPER button as well as my NUM LOCK key is no longer work however, the light on my buttin wireless works.
What is the cause of this? Why would my light still work wireless button and other buttons (2) is not?
I don't know if you have solved this problem, but I solved the problem by removing the plug from the charger, then the battery. While the battery is out, push the power button. Reinstall the battery and reconnect power. When you restart the laptop, the caps lock light and num lock lights worked once again.
-
Satellite A65-S065 - button Power LED is blue & amber at the same time
1st off I have a S065 A65 and worked well after a replacement motherboard, my fault, he had to be replaced.
In any case, I have the power button LED is blue & amber LED light up at the same time. Anyone has any idea as to what it means, or maybe I'm going into something, I don't know what it is and it should be reset at the back. Any ideas?
Thank you
BenHello
I checked the manual of the Satellite A65 and there I can find information that the Power LED blinks orange indicating the machine is in standby mode. So for me it sounds like that your laptop is in sleep mode.
What happens if you click Start > stop and choose the closing down in the menu drop-down? Normally, the power LED button must be turned off and also the laptop is in sleep mode.
-
Hello
My Z820 at the office is suddenly having a few hardware malfunction.
When I turn on my machine, the PSU/system fans don't rev and the Power LED button flashes red with a beep 4 times.
According to this page of troubleshooting, this indicates a faulty PSU on the new UEFI computers:
HP desktop - computer does not start and emits a LED or a beep Code
Section "code beep and LED descriptions.
Get the exact model of LED as the example of "power failure".
Then, I got a new power supply replacement. I still have the exact same model LED and beeps...
So, I have drawn deeper and found that when I removed the Quadro 4000 card graphics and then put on my machine, the power button LED is lit in blue (led code ' computer-S0 (normal operation) "") and all the normal spin fans.
The Quadro card seems to be the culprit...
Unfortunately, I have no alternative graphic card laying to verify this around, I'm waiting for a replacement of the graphics card (via HP service) to arrive tomorrow.
Is it possible that the power LED button code (4 times red with beep...) has nothing to do with a bad power supply and that my Quadro is bad?
Dries
Dry... that Z820 has been giving you headaches.
Many fault codes have not changed since the previous workstatons. I hit this series of beeps of error in the past, and often doesn't mean that the power supply itself is the cause. It can be a hardware device to the bottom of the chain causing a power surge to power, triggering his "crowbar circuit: fault protection
http://en.Wikipedia.org/wiki/crowbar _ (circuit)
Here are the instructions to deal with this series of beeps of a previous HP xw technical and repair. Note the number 2 in the troubleshooting instructions... usually you don't have to go down to 3, in my experience. I think that you have already found the faulty unit:
Loss of power.
1. open the access panel and make sure that the power cable is properly
connected to the system board.
2. Locate the faulty device by removing all devices and then reinstalling one at a time
until the workstation fails. Replace the device at the origin of the failure. Continue to add
devices to make sure that everything works correctly.
3. check the power supply feature.
a. turn off the AC power.
b. remove all cables internal power on the system board.
c. connect the power supply.
● If the power supply fan turns and the BIST LED lights, then the
power supply is good. Replace the motherboard.
● If the power supply fan does not turn or the BIST LED does not
light up, replace the power supply. -
18 XPS does not start, the power light will not stop flashing
I was upgrade this computer to Windows 10, I did install one instead, but the children had spyware which even then showing upwards. I did a refresh, there no I did an installation and finally got in windows. Some updates installed and restarted.
The computer was bricked since. The only thing that happens is the LED which indicates the power above, the button will not stop flashing white light. Connected or not connected, after having held down the power button for 5, 10 and 30 seconds, the led stops flashing for a while and then again. I tried several points of sale. No idea if it is a coincidental breakdown.
I'll change that. I went back in and re-removed the cable from the battery. I also removed the CMOS battery cable this time... I was at least an error message on the screen and access to the BIOS!
-
Qosmio E10 AV buttons does not
Hi, I hope someone is able to help. I have a Qosmio E10 for quite awhile (currently operated on XP) and I recently discovered that 10 AV keys (near the power/sleep button) do not for example by pushing the 'brightness' button does nothing for the effect of brightness, etc. Anyone know how to fix this?
Any suggestions would be very welcome.
Thanks in advance
DrTry to reset/upgrade the BIOS updated.
Did you install XP yourself using a retail version of XP?
You need to install the common Modules and another hotkey drivers.
-
HP pavilion 15-n019TU: bluetooth, wifi, wireless driver button does not
Hello
Bluetooth, wifi and wireless button drivers do not work on my pc for 64-bit windows 8.1 single language.
I could not find the following hardware ID
PCI\VEN_FF42 & CC_0D1100
PCI\VEN_FF42 & CC_0D11
PCI\VEN_FF42
PCI\CC_0D1100
PCI\CC_0D11USB\VID_0E8D & PID_763E & REV_0100 & MI_02
USB\VID_0E8D & PID_763E & MI_02ACPI\VEN_HPQ & DEV_6007
ACPI\HPQ6007
* HPQ6007USB\VID_0E8D & PID_3001 & REV_0100
I use sp65235 for bluetooth, sp63752 for the driver, sp63317 for wifi wireless button. but these don't work. Wireless led button does not turn. It stays red. Help, please.
Thanks in advance
Bests
Abir
Hello:
The bluetooth ID seems to be for a Mediatek bluetooth adapter which means you have a Mediatek wireless card.
These would be 8.1 Windows drivers you need for these devices:
6007 a need of this driver.
I don't know what other devices are.
-
I have a HP TouchSmart 610-1015xt. The light on the transformer power is on, but not exactly brilliant (I think it's good, but not sure). The light next to the power input is on. When I plug in the power, the power led lights up for a couple / few seconds then turns off and does not turn. At no time the computer capable of running and it does no whether noise (no fans, no beeps, no attempt to start.
Any suggestions?
Figured it out. Apparently I have reset the battery internal and then unplugged the power button circuit and then he started upward. The only problem is that now it will restart automatically every time it is closed or even sleep. I'll start another forum on this issue.
Thank you for your help.
-
U2414H, button Power LED
Hi all
I wonder is it possible to disable this Power LED flashing light when the monitor is in standby mode? Basically as monitor is close to my head at night that LED light is now half of my room in light. The only thing that is noticed in the OSD menu is that you can toggle the active phase.
Short of just put the monitor off, no. The manual page 16 shows the power button States.
Why leave mode sleep? I have all of my monitors turn off at the end of the day.
-
replacement for the power button cable / stop, power LED and HDD LED
Need to find cables to replace the header 9 pin on the switch / stop, power led and HDD LED indicator. It is a PC HP Pavilion Media Center m8530f.
Additional details - no one A High School HE thought that the switch was bad on this PC, so they tried to replace it, but ended up damaging the cables. The real problem was a power supply dead, so I ordered a new, but now I need to fix this as the person IT damaged the power button, power LED and HARD drive cables.
Here is a link to your m8530f on HP Part Surfer. I think the part you want is "power switch cable assembly (Black Canyon), part number 5070-2940. It looks like it is available, but you can always call HP and ask.
Frank
-
Portege R100 stoped working - the power LED flashes error codes
I have a R100 that has suddenly stopped working.
The power led (clear amber with the image of the power wire) flashes what appears to be an error code of 5 flashes with a long pause on the last flash, followed by 3 flashes.That - what it means, and where can I get a list of all codes error?
I changed the main battery, changed the spare battery and changed supply - and again, I get the error permanently. I was not able to power the laptop at all since it started. When you press the power button / nothing happens.
I hope someone on this forum has some information that may help you diagnose this problem. Tech support representatives Toshiba post here?
Thanks in advance.
Hello
I m not a R100 owner but to me it looks like a card mother malfunction because you have already tried to exchange the battery and the AC adapter.
In this case, the best solution would be if you go to an authorized service provider. Technicians can consult the specifications and they know what means this code I think.
Here it s only a user to user forum and I have never seen anyone from Toshiba again.Anyway, here you can search for the nearest ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service providerGood luck!
Maybe you are looking for
-
How you import photos to FCP 7? I have a folder of photos and clips, I exported to the desktop, but when I drag to FCP rendering requires. You tube tutorial said to use the compressor, but my application has a gray band across it and I can't find the
-
I have the Pavilion dm3-3010us Entertainment Notebook. I have re-installed Windows 7 top and now there is little missing material. When I go to Device Manager there is an article that says "other devices" and under it are listed: controller network,
-
Generic Non - Pnp Moniter Fix?
Today I turned on my computer and the resolution is really too big, I went to the resolution of the screen and discovered that the resolution, it was fixed to the Max. So I searched the Internet for a few hours and found a way to get back to the orig
-
Through the installation of voice in Win & RC 32-Bit - upgrade to Portuguese.
Hello. I tried to install via voice (Portuguese), as Win 7 doesn't support speech recognition in Portuguese for the moment.I tried several times, but the installation hangs. (as administrator, earlier versions of Windows, etc)...I uninstalled IE8 and
-
I tried several times. Fix did identify and "fix" several problems, but it made no difference to the above mentioned updtaes. I am running XP Home edition has been upgraded to professional. The latter are deemed be updates of security, given that thi