HP 15 - p099nd: HP 15 - p099nd guard restart after disassembly

Similar Questions

• Windows Vista Ultimate guard restart after automatic updates

  Someone help me please find the fix for this problem.  I don't want to re - install Vista again.

  My computer has been in auto for Windows Vista Edition full update.  Service pack 1 & 2 was installed without any problems.  The last update was an optional update for Chinese langauage packs.  When I noticed that this update was at a standstill at 36%, I tried to restart the computer.  Then, there was that messeage "configuration updated, do not turn off the computer".  It takes more than 15 minutes and nothing happened, so I restarted the computer.  Now, the message appears after windows logo vista 'configuration updated step 3 or 3 to 0%.  The update could never finished, the computer just reset again once, the same thing repeats again and again.

  Thank you.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• My computer guard restarting itself over and over after windows xp screens.

  My computer guard restarting itself over and over after windows xp screens. He did the same when I try to put it in safe mode. Is it that I can do to get at least pass this screen?

  Kheta salvation,

  1. Did you the latest changes on the computer?
  2. You receive an error message?
  3. When was the last time it was working fine?

  Start the computer by using the option disable automatic system error reboot and check if you receive the error message, and post back with the details.

  1. Restart the computer.
  2. As the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.
  3. Use the arrow keys to select disable automatic system error reboot and press ENTER.

  If you do not receive the windows logon screen, then refer to the article below and try the steps mentioned.

  Windows XP logon screen does not appear and the computer continuously restarts

  http://support.Microsoft.com/kb/310396

• Guard restart of Windows 8.

  Guard restart of Windows 8. How to start and let me connect?

  Hi Nirmal,

  Try these steps to resolve the problem with the reboot loop:

  Use the Windows recovery environment:

  ·  If you have media for Windows 8 (for example, a DVD or USB), you can start media by following the instructions here. Select repair your computer, select Troubleshooting, and then choose command line.

  · If you have no media, try to restart your computer three times using the power button until the computer tries to start. It should implement the Windows recovery environment. Select see repair advanced options, then choose Troubleshooting. Select Advanced options, and then select command line.

  · Following type, hitting enter after each one:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  · Restart your PC.

• Guard restart of Windows Server 2008 R2

  Event ID 1001: the computer was restarted after a bugcheck. The bugcheck was: 0x0000003b (0xfffff88002fef6ef, 0xfffff8800778dca0, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 100615-28548-01.

  And

  Event ID 41: the system has rebooted without judgment properly first.  This error can be caused if the system unresponsive, crashed or unexpected power loss.

  Hello

  I have a Windows Server 2008 R2 server that reboots randomly.  It has the errors referenced above.  Any help would be appreciated.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• iMac restarts after sleep

  Problems lately with my iMac 27 "5 K. After putting to sleep, it is restarts after about 2 hours.  If I wake up it before that date, it is usually very good. But after 2 hours, it restarts. Sometimes, I find it just be stopped. Most of the time when it restarts itself, it crashes with this gray bar filled about 80% progress.  I have reset the PRAM and EMS, checked all the settings in power management (not set to restart after power failure for example).

  Another problem I 'bypassed' which may or may not be related (I'm including in case it is related) is that on El Capitan, my magic trackpad would randomly wake the iMac.  I had to disable the option to allow devices BT wake up the Mac. When I upgraded to Sierra, the iMac still wake up randomly due to an event of BT. After a lot of trial and error, activate the option "allow bluetooth to computer devices" back prevented the wake-ups at random and let me wake up the computer again deliberately with the trackpad.  Very strange.

  In any case, I'm usually pretty ingenious to resolve this sort of thing myself, but the Console to Sierra news is terrible. Or maybe it's the system logs that are terrible, because I can't find anything about the causes of previous judgment that might provide a clue as to what is happening here.

  So, any advice on how to solve the problem or at least to determine the causes of the previous stop would be greatly appreciated!

  Other information that might be relevant:

  Wired devices:

  USB: 2 external HDs (a WD and a Seagate) for backups TM

  Apple keyboard

  Thunderbolt: 27 "Thunderbolt Display (Apple)

  It's a DVD-ROM of Apple and a trendy optical audio dongle, both

  All 3rd party extensions you are running?

  EtreCheck is a simple little app to display the important details of your system configuration and allows you to copy this information to the Clipboard. It is intended to be used with Apple Support communities to help people to help you with your Mac.

  http://www.etresoft.com/ etrecheck

• iMac restarts after the first start since 10.11.6

  Hello

  Since updating to OS X 10.11.6 my mid 2010 27 "iMac (iMac11, 3) restarts after a few minutes of availability.

  It happens right after a few seconds.

  The screen goes black, and then it displays this message. After the reboot, everything works fine.

  

  Please post a report of EtreCheck of your system if you can get it to boot. Then we can consider for obvious questions that may be causing your problem.

  A cause can be if you have any antivirus, cleanup or third-party maintenance utilities installed. Do you have?

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• I can't install Firefox for Android on HTC Desire (Froyo) via Android Market, as the download keeps restarting after reaching 60-75% (about 7-8 MB of 13.84 MB). Any help?

  Download on restarts after a while. The notification bar poster download % as if the previous download is still in progress. It is, first time started download, notification bar shows % correct. Around 70%, the download within the app market starts again from 0 KB, and the notification bar indicates the average of the two downloads (35% when the download market is 0%, 40% after download in 10%).
  This second new download disappears from the market and a third begins, no any other warning or error message. This time the notification bar indicates average of 3 downloads!
  No idea what's going on, this is my first download firefox for mobile.

  Sorry, I don't know why the app from the market is unable to complete the download.

  If it still does not work, you can try the link to FTP server on this page and see if it works better:
  https://wiki.Mozilla.org/mobile/platforms/Android

  You can also try to download Firefox on your computer using this FTP link and then look for the instructions on how to "sideload" application on your phone via the USB port.

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• STOR. E TV + restarts after the end of the video

  In recent weeks, my store tv + a began to restart after the ends of video files.
  At the * end of file the sistem restarts little whatever it is I'm trying to fix in the options *.

  Can someone suggest how to solve this problem?

  Thank you
  Francesco

  Hello

  Did you try to settle the Store.E TV + to default settings?
  To do this

  At the point of the system configuration, you will find the option restore by default.
  This will help you restore the default settings.

• Satellite P100 - problem during a restart after a software installation

  Hello

  I met a problem when I restart after the installation of software. Stay black screen and windows XP does not restart. The first solution is to wait a few minutes and then I can restart normally.

  Could you please give me a reason and a solution to restart paques1861 after installation?

  Thank you very much.

  Hello

  I'm afraid I n t m understand your problem
  What the installation of the software do you mean?

  Did you use a Toshiba restore CD?
  Please explain your problem a bit more

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Satellite Pro M10: Windows restarts after shutdown

  Guy

  I have the Satellite pro M10 (Win XP, SP2) & I'm having a problem when plugging to the bottom of the laptop, XP restarts after a blue screen. I followed the steps in the microsoft
  page http://support.microsoft.com/default.aspx?scid=KB; EN-US; Q311806 &ID=KB; EN-US; Q311806 #kb1 & uninstalled Easy cd creator 5, but I still have the blue screen. I really don't want to use the recovery CD because I have a lot of data to backup.

  Hello

  Well, the fact is if the blue screen appears especially it of a serious hardware or software failure.
  Check out this page of FAQ from Toshiba:
  http://support.toshiba-tro.de/KB0/FAQ5B01770000R01.htm

  Here, you can disable the automatically Windows XP restart after a system crash.
  Then you can read exactly the error massage. Maybe you can post more details.

• PSL40E xp restarts after a stop only on the power supply current

  Uncheck the automatically restart in the system failure section
  Disable wake up LAN
  Disable installation
  SP2 or sp3, same problem
  Install any drivers
  knowledge microsoft (Roxios Easy CD...) same problem, restart after a stop

  Bios Flash, SM bios for vista and win 7, but not for xp on page drivers toshiba...

  This occurs when the LAN cable is connected to your laptop only?