HP 15-r001nc: controller and USB network controller

Similar Questions

• HP 110-510 x: need help on pci, bus and usb sm controller

  I just spend Budled Ubuntu a Win7 Ultimate, but I can't find the driver for pci encryption controller, sm bus and usb.

  is there a compatible driver, I can use it, even if his other product HP?

  Thank you

  Hello:

  For the smbus controller, install this driver and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=cp_127758_1

  For the usb3 controllers, install these two and restart.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_139250_1&swEnvOid=4058

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

  For the encryption pci controller, download and run this driver... It will probably not install the device automatically.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_133833_1

  Go to Device Manager and click on the controller E/D PCI needing drivers.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66974.

  Make sure that the include subfolders is selected, and the driver should install.

  Then restart.

• SM bus and USB drivers for HP Pavilion DV6 6024TX controller

  I just had to do a clean install of Windows 7 Ultimate 64 bit on my HP Pavilion DV6 6024TX laptop.

  I installed all the recommended and optional Windows updates and everything works * except * the SM Bus controller and USB controller - which are both showing yellow exclamation in Device Manager.

  I looked at the forums and it is clear that I have to install new drivers, but I'm not 100% sure * that * drivers to install.

  I know that this template contains * time * an accelerator of 6770 M graphics AMD Radeon * and * Embedded Intel HD graphics - and this is supposed to be switchable between the two, according to the profile of power it uses.

  I looked for the latest drivers on the AMD website and they * don't * switchable graphics support - see: http://support.amd.com/en-us/download/mobile?os=Windows 7-64

  This support AMD article returns me on the HP site for the best drivers: http://support.amd.com/en-us/kb-articles/Pages/737-28041SupportforATIMobility.aspx

  I looked at the download page of the HP driver for this model, so there are a few options: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=au&dlc=en&sw_lang=&product=5079...

  Did someone please advise I need the drivers and the best place to find them?

  Thank you.

  -JS

  You are the very welcome.

  Here is the link for the driver for the usb controller 3, you need.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100224-1&cc=us&DLC=en&LC=en&OS=4063&product=5079572&sw_lang=

• Impossible to install the drivers of Etherner controller; SM BusContoller and USB 2.0 - ORW

  Original title: Windows 7 Home Premium.

  Impossible to install the drivers of Etherner controller; SM BusContoller and USB 2.0 - ORW.

  You are welcome. Please check the answer.

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• Drivers PCI and USB for W8.1 HP Compaq 8000 Elite SFF?

  Hi guys,.

  I'm trying to update an old workstation HP Elite 8000 LTS to W8.1 but can't find the right drivers for the PCI Serial Port and USB devices. Driver HP downloads page shows nothing for W8 x 64 when I put in the serial number and search for drivers. Apparently, Windows 7 is as far as I can take this machine?

  Naively, I thought that Windows can handle these aircraft out of the box, given his age.

  Can someone confirm if I'm able to run W8.1 on this material and if yes where I could find appriate drivers for it?

  

  Thank you

  Scott

  You are the very welcome, Scott.

  From what I can make of this hardware ID, it is part of the USB2 controller system.

  Something really got blocked upward with the USB/USB2 chipset driver part.

  See if this Intel chipset driver installation does nothing to correct the problem...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20019 & lang = eng & ProdId = 816

• SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3

  Hello

  My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.

  We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.

  I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).

  We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.

  Any help/pointers gratefully received

  TIA

  Elmer

  Hello

  Please check the following post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/SM-bus-controller-and-USB-controller-drivers-for-Pavilion-P6/TD-p/2814635

  Kind regards.

• HP pavilion 15 laptop: hp pavilion 15 notebook pc 26-a6f20450gr1 bluetooth and usb

  Hello

  I have laptop hp laptop pavilion 15 pc 26-a6f20450gr1 but the bluetooth and usb doest work and I tried all the drivers I found in the main hp site but it does not work yet so can you blease help me?

  BTW I'm using win 7 32 bit

  Ok.

  Install both of these drivers instead and restart the PC.

  This package provides the driver AMD USB 3.0 Host Controller for the notebook models and operating systems. The driver allows USB 3.0 devices.

  FTP://ftp.HP.com/pub/SoftPaq/sp68501-69000/sp68651.exe

  AMD USB Filter Driver is a superior class of USB for AMD chipsets filter driver. The AMD USB filter driver provides optimizations for management and the power output on the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66406.exe

• Audio and USB will not work on Sony vpceb2s3c.

  Original title: help looking for drivers please

  Hi im having an absolute Mare!

  I have a Chinese built laptop sony vpceb2s3c (pcg - 71211t) with 7 home premium

  the lappy had a h.d fgaulty ive succeeded him and installed 7 Home premium 64-bit

  drivers im faced with are audio and usb

  is the audio hardware id: HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_104D4600 & REV_1002

  now, this seems to be for ati hdmi driver 6.0.1.6121 that I tried but does not work, ive tried to use genius driver, Driver Verifier, and magician pilot with no luck. Ive tried a sony driver, called audio_hdmi 6.0.1.5992

  They both install fine but the lappy does not recognize an installed audio device, the generic microsoft driver does not work either

  for usb I'm not sure what is wrong, as the left hand esata port side works very well I can put my usb pen in and it works fine. There are 3 right of the lappy usb ports which do not at all, in Device Manager I have:

  generic usb hub

  generic usb hub

  Intel 5 series/3400 series chipset family usb enhanced controller b 3, 34

  Intel 5 series/3400 series chipset family usb enhanced controller 3b3c

  USB root hub

  USB root hub

  I guess that's 2 generics that are the problem, ive tried to reinstall only the infinst911autol file from intel, but it does not work properly, it is said it will install, but seems to be almost instantly makes me think, he's not doing things

  ive tried sony China pilot site but cannot find software downloads, drivers

  any help would be great, thanks in advance

  Hi daz,.

  If you get a 404 error trying to download the drivers, you can contact the seller to see if they will send the version you need from you.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 - bit, GA-970-a-DS3P, slow SATA 3 HD and USB 2.0 also issues

  Let me start this way:

  Material:

  Motherboard: GA-970-a-DS3P

  (1) WD Caviar Black HD: 3 amendments of 1 TB each. One for the OS, one for applications and one for Swap. (Don't ask how I ended up with this config: it's a long story of upgrade).

  (2) graph GTX 550 Ti card.

  (3) AMD Phenom x 4 965 BE: all 4 cores unlocked. DO NOT overclocked.

  (4) RAM DDr3 8 GB (2 sticks)

  (5) rest include 1 SATA DVD drive, Cooler Master monstrous fins CPU cooler (which cuts my fingers twice) and a power supply 650W (Cooler Master)

  Software:

  (1) Windows 7 64 bit ultimate (new installation)

  (2) MS Office 2010

  (3) Acronis True Image 2012

  (4) cloud of Creative adobe: Adobe Acrobat Pro XI

  The ORGANIC parameters:

  a value of 1) all SATA AHCI.

  (2) active xHCI. (no idea)

  (3) active eHCI. (no idea)

  Drivers:

  1st install Gigabyte SATA AHCI and USB 3.0 drivers drivers. All keyboard & mouse drivers are from Gigabyte.

  2nd configuration (after that I discovered that it was slow death): DriverMax provided SATA 3.0 AHCI drivers.

  Windows start up the GUI login screen in 40 to 43 seconds after the POST.  (Used to make less than 30 seconds before I installed MS Office).

  Problem and diagnoses that I made:

  (1) primary HD is extremely slow to respond. It takes just an inordinate amount of time to respond to the high activity of HD. (Like when I try to copy a large file on the C drive or read from drive C).

  (2) I used Perfmon.exe to monitor disk queue length and % disk time Avg. Length of queue disk on drive C starts from 0.117 and amounts to 24,26 within 20 minutes once I started. % disk time is high at 118.98 or even above.

  (3) surprisingly a USB 3.0 flash drive has reported a speed of 118 MB/s on a copy of a file of 3.4 GB D USB 3.0 drive

  (4) USB 2.0 reported avg 28 MB per second, which was expected.

  (5) after that I removed the drivers from Gigabyte SATA, I used one of Drivermax (don't know what it was).  Yes, I remove the old drivers, rebooted and then installed drivers drivermax.

  (6) disk queue length dropped to 0.28 on average when copying to and from the drive C and even under heavy operations.

  (7) Windows experience index stays at 5.9 for HD primary.

  (8) Avg speed of drive C is now about 128 to 132 MB/second (seriously?)

  (9) I don't find the exclamation points or question marks in Device Manager.

  (10) now, since yesterday, the speed has dropped again down (no updated driver, but the critical Windows updates made). Avg disk queue length again increased slowly to about 24.23.

  (11) what I did a chkdsk c: R, but could not find any errors of surface HD.

  (12) I am past controller cables and plugged in the different plugs (which cut on sharp edges of the graphics card and the fins of the cooler: why HW manufacturers can soften the edges: they will lose money?).

  (13) USB 2.0 speed has dropped drastically to 7,28 MB/second copy about 1 GB of multiple files of 12 MB each.

  Am at the end of my rope on this.

  Can I have a very problematic motherboard? Have I not dumb drivers? Or I did something wrong here?

  Any help to fix this problem of speed appreciated.

  P.S. The system is also catchy and fast with start-up less than 45 seconds, even times with connected devices. Opening apps are fast and load system (also long that I do not touch the C drive) are faster.

  Thanks in advance

  I misinterpreted the word 'no'... :-)

  Clone of the boot drive on the disk used for the page file after removing the partition on the drive of page file as in reduce to unallocated space. Your current boot drive is perhaps not the strongest of its kind.

  It can be done with the help of Aomei partition Wizard, free for home use.

  http://www.aomeitech.com/aomei-partition-Assistant.html

  If the computer seems to be ok, stop the execution of the performance monitoring software. It can drive a person crazy. Glance for other stuff that can slow the system down...

• Question about the use of with Satellite A200-10W USB network card

  Can I possibly use a wireless-G USB network adapt to my Satellite A200-10W [with Wi - Fi Finder]? Pls advise. Thank you.

  Hello

  Why not? Surely, you can use this stick with your machine. Just put em in a USB slot, install the drivers and then let go! :)

  If you have any other questions, then just ask.

  See you soon

• Sync Center will synchronize MS Office files between HDD and USB/SD removable media?

  I use Windows Vista Ultimate SP 2 installed on a Dell laptop.  Can I use Sync Center to sync files between the HDD from the laptop and removable media USB/SD MS Office?

  I ask because the option 'Always available offline' does not appear when I right click on any folder to removable media connected to the laptop.

  Hi Patrick,

  You can synchronize files using Sync Center if you have a mobile device that supports this feature of Windows. However, Sync Center is designed primarily to synchronize files with a server on your network, rather than with a camera.

  Sync Center does not synchronize with external drives and USB key.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Sync-Center-frequently-asked-questions

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Require the NDIS2 drivers for HP LAN and USB travel hub

  Hello

  I have some ultrabooks with no LAN on board, which I am trying to use an image Ghost (the network).

  I use a HP LAN and USB hub, but to get the ghost to work, I need drivers BACK (NDIS2) to get this working.  Any ideas where I could get these in.  I had a good glance but had no joy so far.  All of my generic drivers seem to fail too!

  Thanks in advance!

  Hello, I'm not familiar with the "HP LAN and USB travel hub", but I used a good amount of Ghost!

  I think that it can be difficult to get this ethernet device works in DOS mode.  One of the problems is that DOS itself does not have support for the USB, so you would first get drivers in real mode USB installed and then find/layer drivers for HP LAN and USB travel in addition to this hub.

  This looks like a difficult task.  Must the ghost image be stored/retrieved over the network?  It may be easier to use Ghost with a local storage device, for example a USB optical drive or an external/USB drive (if that's an option)...

  Another option would be to use a different disc Imaging program (the one who works within Windows, or something like a Windows PE boot disk uses instead of BACK).

  I hope this helps!

  Dave

• Different segment of the USB network server error

  Running Windows Home 7, with a wired USB (SOHO) server when connected, he says 'Different Segment of USB network server' how can I solve this problem?

  Concerning

  Hi David,

  Thanks for the update on the issue.

  If the problem persists, try these methods below and see if that solved the problem.

  Method 1:

  There may be several reasons why a computer is not able to detect a signal wireless adapter. Wireless networks appear only if your PC has a wireless network card installed, the adapter is turned on and the wireless access point is within reach. Many network connection problems are caused by hardware that is not configured or the drivers are not installed properly. Follow the steps described in the article below to check on all aspects and troubleshoot accordingly.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Keep us.

  Kind regards