HP 1536dnf MFP: HP 1536dnf MFP 2 flip up faces is no longer work

2-sided: "Flip up" used to work (for 2-sided printing landscape). Now, it prints the same as «back» This can be corrected. I don't know a reason for the change. Thank you.

Hi @Thanksforhelp,

Thank you for joining the Forums of HP Support!

I see that you are no longer able to print 2 sides with your HP LaserJet Pro M1536dnf multifunction printer documents. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

It is possible that something has changed in the print driver.

Download and run the print and Scan Doctor to confirm that the correct printer driver is installed and operational, as it should
What were the results when you ran the printing and scanning doctor (she print or scan, error messages)?

Please see the user's Guide: printing on both sides (front and back) with Windows.

Please follow this guide to make sure that two-sided (duplexer) printing accessory is correctly installed.

I hope this helps. Please respond if you have any questions. I wish you a nice day!

Tags: HP Printers

Similar Questions

  • LaserJet mfp m276nw pro 200: after the ios10 airprint upgrade no longer works

    After that I installed ios10 on my ipad that I seem to not be able to print more. the ipad is the printer, but it just does nothing when I press on print. Still, the airprint works for ios9 (old ipad).

    Nothing not done, I installed all updates of driver and firmware updates.

    Any help?

    Hi @noosterbeek,

    Thank you for joining the HP Forums!

    I understand that your AirPrint does not work with your HP Laserjet 200 m276nw of pro mfp printer after an update of iOS. I'm happy to help you!

    Please take a look at the section titled, what happens if a "No AirPrint Printers Found" message on my device Apple? In this guide, print with Apple's AirPrint. Let me know the results after trying these steps.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    I hope this information helps!

  • LaserJet 100 color MFP M175nw: Laserjet 100 color MFP M175nw will not connect wireless - used to work properly

    OK - I'm out of here.

    I've owned a Laserjet 100 color MFP M175nw for awhile, and it worked perfectly.

    Installed the software for 2 computers at home and everything worked well.

    Last week, I changed the password to my router for the home network.

    The printer showed as "offline".  I couldn't change the status.

    After much trying I totally uninstalled the software, deleted the printers on my PC and reinstalled.

    I run the installer - tell him I want to go and so that it can detect my wireless network settings.  (I also tried the option where I have to enter the information manually). All else fails.

    Setup starts and then asks me to install the USB cable.  I do that and the installation program is going very slowly (I mean it crawls along) and wrote "Product has been detected", "Waiting for installation of the product at the end. Then I get a big red 'X' and it is said that it took too long to run and a fatal error occurrred or he tells me that it cannot find a product to install.  If I run the installer and say USB only, it works very well.  Ugh.

    When I press the button on the front panel wireless and it flashes only and that's all.

    Here's what I did - full power / turn off the PC and the router.  Updated the firmware of the printer used the new installer (all from the HP website).  Tried it on 2 different PC to ensure that it was not isolated.

    The USB cable is good because after the failure, I can print via USB (I lost a forest to print the test pages).  Same PC and OS for both when I bought the printer.

    Ironically, I spent several years in this DOCUMENT, so it's not familiar works for me, just very frustrating!

    Well, I finally had it - realized that the WIFI adapter on the PC had to have the new password entered.

    It was step 1.  Step 2 followed another post where I attached the printer directly via ethernet to the router cable, and once the IP address appears in the menu of the printer, I entered on my browser and the name of the router is entered, pw and managed to turn off the wireless printer on.  Then, by running the installer worked like a charm.  Woo-Hoo

  • [SOLVED * nix way] How to get a professional M1212nf MFP from HP LaserJet with Win 2008 R2 work?

    Hello

    We bought four HP LaserJet M1212nf professional MFP and should have read forums first

    Our goal is to give our Printserver (Windows Server 2008R2) the actual driver. Printer is used only from clients for Win 7 64 bit.

    Whenever we install the driver on our 2008R2 printing service stops and has to be started manually.

    In some trials, we could install the driver but when connecting to the network printer to a customer the printing service on the customer every time we stops try to print.

    In several forums, I read about the problems with this printer based on the host and looking for a workaround solution. Read comments to disable bidirectional printing and disabling winding on the client. With this set of options does not stop my printing service, but also, it does not print

    Universal driver does not work on this host-based printer.

    Further, I tried HP Laserjet 4, pilot with the above mentioned switches together but that does not work, too.

    Any help would be appreciated.

    Best regards from the Germany

    Sascha

    Hi pcwizard,.

    now, here is our solution for this problem:

    1. A small linux of your choice of installation installation and install the cups
    2. Install the hplib (http://hplipopensource.com/hplip-web/index.html)
    3. Add the printer using the hp-setup utility (you must do this with each M1212; simply copy entries and change the ip in the configuration of printers will not work). The hp - Setup utility also installs the plugin owner.
    4. Create a new printer on your windows server
    5. Select new connection and create the connection with your new server name and printer cups
    6. Choose the HP Universal PostScript driver or any other postscript driver (otherwise the cups server will not make the task)
    7. In the printer properties select printing goes directly to the printer (for the cups in this case server)

    Once you have completed the printer worked very well for each workstation (linux too).

    I have now four printers work in my network.

    Best regards

    Sascha

  • 277dw MFP: MFP M277 Duplex is no longer working after the update of 15245

    I installed the last update of the HP Support Assistant said I needed.  Installation only is not as easily as the prerequisites installs and software seemed to have lost the ability to do automatic duplexing, which worked before.  He invites me to turn the paper and the "Print on Both Sides" now says "(manually).

    The function "automatic detection" used by some drivers on the install (or update) does not always; make sure the driver knows that a duplex unit is present on the printer (assuming that a single is present):

    • For the instance of the printer in question, bring up the printer properties dialogue.
    • Select the device settings tab.
    • Make sure the duplex unit is set to installed and not installed.

    You will probably need to be logged in with administrator credentials in order to change the settings of the device.

  • Question of LaserJet M1319f MFP Installation on Windows 7

    Dear HP team and community members to support,

    I am currently trying to install HP LaserJet M1319f MFP connected via USB on Lenovo Q190 machine /Intel Core i3 processor / freshly installed running Windows 7 Enterprise 64-bit with Bulgarian language pack, all updates, Microsoft Forefront Protection/i also tried to disable the real-time protection /, UAC disabled, account administrator, IE 11, .NET Framework 4.5.1.

    The priter work properly with Windows XP.

    I downloaded the package of driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...

    After reached installation process 'Copy of the files on the hard disk' stage Setup returns error software install printer no longer works.

    I tried to run with Windows XP SP3 compatibility mode or administrator privileges, but the same error occurs.

    I tried Microsoft Fix It software to install/uninstall drivers too, but without success either.

    I cleaned up the temporary files and Max about 10 to 15 times.

    Windows update is not help with drivers too.

    I tried to extract the Installer files and manually add the printer and received the error that the installation was not successful and it says below the file is not found / if I remember it well.

    After that I tried the HP Print and Scan Doctor software, but it shows that there is no driver installed and redirect me to the driver download page.

    I tried the Assistant driver software also, but it returns that this model is not supported.

    I tried to change the Startup Windows "Selective startup" with "Load Startup items" unchecked and all non-microsoft disabled services, but without success.

    Under safe mode that will not accomplish the install because the print spooler service does not, which is running normally otherwise.

    The "ntprint.inf" file is present in the folder 'Windows\inf', HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x 86 registry has only subkeys drivers and print processors and the HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors registry has only Local Port, Microsoft Shared Fax Monitor, monitor the Standard TCP/IP Port, USB and WSD port subkeys.

    The Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 folders are empty.

    I ran sfc/scannow in cmd with administrator privileges, but there was no violation of integrity.

    I tried to disable the IE component, but no luck either.

    So now I'm out of ideas how to connect that * bleep * thing... I hope someone can help me with this problem.

    "Hewlett PackardHP LaserJet M1319f MFP" currently devices without driver installed in Device Manager /Hardware ID USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and Scanning HP /hardware ID USB\VID_03F0 & PID_5817 & REV_0100 & MI_00 and USB\VID_03F0 & PID_5817 & MI_00.

    I forgot to mention that I tried all kinds of variations with these solutions with or without connected printer.

    Thank you very much in advance for all type of guidelines.

    Best regards

    Ivan

    P.S.: at least, I think that I managed to collect all related solutions in this topic...

    Dear Gemini02,

    After a few days of trying different types of solutions, I finally managed to install the printer as a network device.

    So basically, I also had a problem (error 0 x 002) with the installation of the printer as a network printer. Restart the Printer Spooler service has not worked and erase cache files did not work either.

    So I installed x 64 driver on the host machine and then installed the network printer. For those who do not know how to install x 64 drivers:

    -Download the drivers from the official HP support page

    -Check out the *.exe file in a folder (if you don't have additional archiving program replace *.exe with cover and unzip it with the build Manager). Navigate to the folder 'x 64' and extract the file "LJM1319L.cab" to separate the folder.

    -Go to 'Printers and faxes' ("devices and printers" in Windows 7 ")

    -Then right click on the shared printer already and click on 'Properties' ("printer properties" Windows 7 ")

    -Click the 'sharing' tab and click on "additional drivers".

    -Select 'x 64' or only ' IA64"in the case that your hardware architecture is demanding and click 'Apply'.

    If you have already installed the drivers, the rest is not relevant, but if you do not:

    -Open the extracted folder and select the file "HP1319fp.ini" (if it returns select error 'HPM1319.ini')

    -When he asked the second time pilot open 'x 64-> LJM1319L' and select the *.dll file

    -on the third request for drivers go to 'x 64 English-> PrntDriver' and select 'ZSD1319P'.

    I couldn't try to connect and install by USB (the office that I am taking care, as if it were new post more), but after the successful installation of the drivers that the printer connected locally should also work perfectly.

    So I hope I was help someone like me about this and still do not understand why I should have done everything for installation driver simple?

    Best regards

    Ivan

  • HP Laserjet Pro 200 Color MFP FAX answering machine vs M276nw

    We have the following MFP: HP Laserjet Pro 200 Color MFP M276nw

    Our office has a phone line to be shared between the phone and FAX (M276nw). The phone is a phone single line of integrated with a digital answering machine Panasonic KX-TG7531 model. I can't seem to find the right combination of settings for ringtone for the phone and the FAX that allows callers to leave a voicemail without the FAX modem tones interfere when the caller leaves a voice message. It's as if the fax does not recognize that the answering machine picked up and he continues to make sounds of modem. The tones are saved as well as the message of the caller's voice, which makes the message difficult to understand. In most cases, the caller simply hangs up without leaving a message (we've heard talk about this later).

    Please tell us how to implement. Thank you!

    Furthermore, the HP Laserjet Pro 200 Color MFP M276nw replaced a MFP from brother, but the Brother FAX has worked with the same phone from Panasonic.

    Hi crmarrio

    I understand that you are having problems of fax.

    Run this test for the fax.
    In the home screen, press the button on the key.
    Tap the service button.
    Tap the fax service.
    Touch run fax test.

    Check all these fax settings.

    Here is a url for the fax troubleshooting.

    http://support.HP.com/us-en/document/c03363598

    Go to the icon/fax setup menu/Advanced Configuration key / private receive/disable it.
    Go to thewrench icon/service/fax service/error correction/stop.

    Go to Settings icon/fax thewrench / fax/advanced/change configuration to speed it to the middle.

    Go to the key icon/fax installation base/menu Configuration/response/game of rings rings.

    (if using an answering machine-more rings on fax and answering machine or rings of mail without a voice for the fax, but receives no voicemail, should get installation of distinctive ring on the line in this case)

    Go to the key icon/fax setup basic menu setup/response/selection of auto mode.

    Go for a key icon/service menu/fax service/clear saved faxes

    Go to key icon/fax installation base/menu setup/distinctive ring/set for proper ringtone type. (if you don't have a special ringtone set on all ringtones.

    Update the firmware of the printer by usb connection.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&docName=c03363598&LC=en&product=5097654&

    Let me know the results of the fax test, and if you were able to send or receive a fax.

    If you're still having problems, let me know and I send you private message how to reset the printer.

  • HP LaserJet M1536dnf MFP responds automatically faxes

    My new HP LaserJet M1536dnf MFP does not automatically fax calls.  I don't have a phone hooked or a voice mail/answering machine.  "Answer Mode is"Auto".

    We use an analog converter to connect to our internal digital VOIP phone system.  Prior MFP which was connected has not had problems with answering machine/printing faxes.

    I can see "Incoming" call on the screen, but it just rings and rings.  If you press the button "Start Fax" when it rings, then he will proceed to the connection and receive it, it finally drops the call.  It's not good to see many faxes come when the office is closed or otherwise unattended.

    I tried setting "Fax / such", but that no longer works.

    Help, please!

    Thank you very much!!!

    Hi @DW - OH,.

    I see by your post that faxes will not come by when it is set to auto or Fax / Tel, but manually, you can receive the fax. I can help you with this.

    Update the firmware of the printer.

    HP LaserJet Pro M1536dnf multifunction printer drivers.

    Select your operating system, click Next, click the link for the firmware.

    Please check your messages for the reset of the printer, I saw that solve this problem before.
    In the forum next to your handle name simply click on the envelope to see.

    Good day!
    Thank you.

  • CM6040 MFP: hp cm6040 mfp o

    My CM6040 MFP is to crease the paper after the work print and copy jobs. Just a slight crease in the middle of the paper, no matter what size paper. All the supplies, they are adequate. What is the fuser unit? What is your suggestion of difficulty?

    Hello

    Given that the problem is with the rustle, the possible suspect part is fuser.

    To confirm, please proceed as follows.

    1. print a configuration page of tray 1.

    2. as the rear end of the page between the printer stop printing.

    3. open the door of the printer and gently remove the paper. The page should have stopped before entering the fuser unit.

    Check if the page has a ride on it. If so, the Ride that happens before the page reached fuser.

    If there is no wrinkle, then occurs when the media through the fuser unit.

    You can also remove the fuser unit and check if there is no default on the roll.

    Please note: the fuser is hot during operation. If you please, turn off the printer and let it cool down before you remove to check the defects.

    Although I am an employee of HP, I speak for myself and not for HP.

    -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
    -Please mark the post that solves your problem as "acceptable Solution".

  • How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

    How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

    What host name that I can use?

    If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

    What server SMTP should I use in this case?

    I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

    Thank you...

    I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

    Scan and send (e-mail, send to folder, digital sending, etc..)

    Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

    Simulations of MFP - digital send

    If these don't work, please let me know and I will continue to search it for you.

  • HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

    I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

    The scan function has stopped working. Here are the steps and errors that I see:
    1. I load the sheet from which I scanned in the printer and the printer displays
    2. I start Windows Fax and Scan dialog box and press the button new scanning
    3. New Scan, dialog and I press the Scan button
    4. the printer begins to feed the sheet and displays
    5. immediately after the message that the printer displays the message
    I did the following steps to try to fix the scan:
    1 uninstalled the printer and it added. Scan still does not work.
    2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
    3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
    4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
    Any suggestion would be appreciated.

    Hi ApolloWZ,

    Thanks for your quick response.

    In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

    I found the answer here:

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

    I will cut & paste the answer below, in which case the link above doesn't work at some point:

    (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
    (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
    3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
    (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

    See you soon,.

    Gary.

  • Keyboard VAIO Flip 15 has stopped working

    A few weeks ago my flip 15 Vaio keyboard has stopped working. Laptop itself is in excellent condition, no scratches, and it never fell because the purchase in December 2014.

    Help button (Help button works) I entered/bios recovery and I tried keyboard-useless, he did not;

    Keyboard LED light up for the sleep/wake, start and stop.

    When you use the external keyboard (usb) and press CapsLock shift, the led on the keyboard of the laptop hats block button lights on/off

    I found that the Ark42 Member has the same problem with his flip 15 vaio (he describes how to replace the keyboard, replacing it with a new one does not solve the original problem, new keyboard also didn't work) in the topic "How to replace the flip 15 vaio keyboard."

    So, maybe someone other has (had) the same problem? And what has been done to solve?

    Or perhaps, representing Sony could share the details of this issue, what is broken?


  • JBL Bluetooth Flip cell phone Speakr

    I added the JBL Flip pregnant at my computer device, but I can't seem to connect and send sound through the Flip. I can make it work on my Samsung S3 and iPhone 3GS phones, but it does simply not my Dell E6220 computer. Does anyone else have this problem and knows the solution?

    Given that your post was incorrectly posted in the forum Feedback, I moved it to the windows 'Hardware and drivers' forum, where it will be more on the subject.  Don't forget to come back to yor thread and tell us your version of Windows.  Never keep your Windows version a secret during the validation.

    Is the speaker a Bluetooth speaker?  If so, your PC has Bluetooth networking capability?  If this is not the case, how your speaker connect to the PC?

  • HP Officejet Pro 8600 Plus stopped Scan of the computer... Said the computer could not be found. Help!

    Hello

    I've been enjoying our HP Officejet Pro 8600 more MFP for a year now.

    Analysis of the it function on our machine no longer works. It indicates that the computer cannot be found. I used this feature all the time in the past.

    I can acquire a scan from an application, like Photoshop and I can scan to a removal storage device, but I can't use the computer Scan, and I really liked this feature!

    A few days ago, our computer has been infected by a virus. A Norton agent could succeed in eliminating it. Do you think this could have disabled the feature computer scanning?

    How can I get the MFP to recognize my computer again? I've looked up and down and impossible to find the solution for this.

    Thanks for any help you can provide!

    (With the help of a HP PC with Windows 7 64-bit)

    This solution fixed my problem:

    http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/scanning-function-does-not-work-but-able-to-print-from/m-p/3604099/highlight/false#M83505

    Thank you very much!!

  • Install driver OfficeJet Pro X476dw on Win 7 Enterprise 64 bits without administrator rights

    Hi all

    I have an OfficeJet Pro X476dw for my home office and I would like to use this printer on my company PC. Unfortunately the standard company of Win7 64 bit installation does not come with a set of drivers for the OfficeJet Pro X476dw. Unfortunately my company does not allow installation of company not certified pilots and they decline my request to certify the official HP drivers. So my question:

    is there any driver easily integrated in Windows 7 which could be used to run the X476dw of OfficeJet Pro

    Any advice is welcome!

    Best regards

    EMVH

    Thanks Futoji,

    Meanwhile, I figured out how to fix it for my Win 7 Enterprise 64-bit:

    (1) download the PCL 6 printer with installer driver

    (2) run the Installer (which will fail)

    (3) get the extracted files (must be in c:\users\ (you'll identify it through the most recent date, the copy path))

    (4) kick-off detection routine printer using 'Add printer' > ' add a network, wireless or Bluetooth printer.

    (5) take the printer without specification of 3911 port

    (6) select 'have disk... '. "and will give the driver (path of the dough)

    (7) select HP OfficeJet Pro X476dw MFP PCL6 driver

    (8) test

    It worked for me.

    Best regards

    EMVH

Maybe you are looking for