HP 15r205tu: i3 5010u, uncore after sleep and wake up power consumption increases

Similar Questions

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Display driver nvlddmkm stopped responding and has recovered successfully after sleep, and then blue screen

  original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.

  Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.

  update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Since the upgrade to El Capitan, Lightroom crashes after sleep and requires Force Quit. Is there any solution for this?

  It happens constantly and is extremely frustrating. Everyone knows this or does anyone know a fix?  I use an Imac, retina 5K to 27 in late 2015.

  Thanks in advance.

  Disconnect all your external drives, then check if blocking is occurring always. El capitan has made some changes that actually a bit lazy with reassembly of external hard drives after reactivation, and it's a good idea to check if the cause of your problem is the external drives. If this does not prevent blocking problems, you can reset your Lightroom preferences files. See here: http://www.lightroomqueen.com/articles-page/how-do-i-reset-lightrooms-preferences/

• Quick Launch button remains constant and every time the computer goes into mode 'sleep' and wake up to the top, it does not close properly.

  Original title: MediaDirect problems

  I have a Dell Studio 1535 under Vista Home premium 32-bit. My computer has Media Direct installed, and lately the Quick Launch button stays on permanently. Whenever I put my computer in mode 'sleep' and then wake him up, I am presented with the problem of my computer being off does not correctly... How can I solve this problem?

  Hello

  1. What are you referring to whn that tell you immediately the Quick Launch button remains on constantly?

  2. are you referring to the Dell docking station?

  You can try to update the graphics card and check if it helps to solve the problem.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also check out the Dell support link to download the drivers:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&cs=555&l=en&s=biz&ServiceTag=&SystemID=STUDIO1535&OS=WLH&OSL=en&CATID=&impid=

  Hope this information is useful.

• Dell 11 7140 place - do not start after reboot and shutdown without power connected

  Hi all

  I had problems with my new Dell 11 7140 place since I bought it. If I reboot or shutdown the Tablet without the power cable plugged in, it crashes on start/stop to a black looking screen as he stopped (but it isn't). He will sit on this State forever or until the battery is completely discharged. If I press and hold the power button for 5-10 seconds I can force a shutdown and turn off the tablet.

  It's even worse if; After that I have to reboot the machine, it just sits there on the circle of rotation points and never goes anywhere. After a few tries, it will eventually in windows recovery, but he never manages to recover anything. The only way to get the Tablet working again is to reimage the dos operating system.

  I tried the following:

  1. Most recent of the installed BIOS A07
  2. All the latest pages Dell device drivers
  3. The latest version of Windows Update
  4. I tried to start in safe mode, but get points again spinning
  5. Tried to restore points that had once or twice the PC to start again, but the system is messed up. Built in Windows apps like photo viewer don't work anymore and I just to reimage.
  6. Tried running the Dell diagnostics, but which did not find anything wrong

  The funny thing is that if I reboot or shutdown with the power connected, then everything is OK. I can do this all day with no problems. Standby and hibernation work OK with no power attached.

  I have tried everything I can, but I'm at a stage where he's going to have to go back to Dell. Please can anyone give me any suggestions of what I can try, thank you.

  To follow up on this post, the final solution to this issue was to return to the Dell Tablet. The motherboard has been replaced under warranty and since it was returned to me I have had no more problems.

• HP Envy m4 Windows 8 do not sleep and wake properly

  I recently got a HP Envy with Windows 8 m4, and every time I try to sleep, he never goes in mode 'sleep'. I'm assuming, since fans are always running up and the power light is still on (not flashing). If I try to wake him up, he doesn't. I tried pressing the power button, by clicking on the mouse and trackpad and typing on the keyboard. I tried to change the settings of the Control Panel, but nothing seems to work. Any advice would be appreciated.

  Hey yal! So, I don't know when it happened, but the problem is solved. I think that there is an update at some point, but I still am Kapersky and am able to sleep and hibernation.

• Responsive touchpad after sleep and the screen lock

  Hi all

  I have a Pavilion dv6 and the touchpad has the groovy feature where I can type in the upper left corner to turn it off. The problem is that when the screen saver comes on and locks the keyboard, the touchpad responsive when I unlock the computer and I have to turn it off again. He also always reactivate during the resumption of the mode standby and doesn't remember the State it was at the time to sleep.

  Is there a way so that it can remember what state that I put it? I don't want to disable it completely, because I use it, but it's annoying having to keep the neutralization of him.

  Scott.

  Thanks David,.

  This tip was very close, but not quite right for the version of the touchpad software I have. He however gave me what I needed to understand that such an option has even existed!

  In my Touchpad settings:

  On the left hand side select "Tapping" and then "cogwheels" parameters which appear to the right

  The 'Touchpad Switch' option off for a session is there.

  Who is doing what I wanted. It enables even when the screen is locked is not a problem, but it disables it again when I unlock it.

  Thank you.

• Windows 8. The mouse cursor disappears after that my computer sleeps and wakes up then.

  I unchecked property "mouse shadow."  After about 5 minutes of my violin with the other properties of the mouse, the cursor appears again.  My computer is brand new.

  Howdy,

  I too have been looking for forums and playing with the power settings for days - it was driving me crazy!

  I happy to report that I found a work around for this problem.

  Simply plug your mouse / KB in a USB hub - I got a hub powered bus of really cheap 4 ports (one that does not require an external power supply). If you like your classic Intellimouse Optical as I do, it may be the solution for you.

  Hope this helps someone.

  See you soon.

• Create custom jobs sleep and wake-up

  Hey people, I'm looking for someone who is a little geekier then I have helping me fit these tasks.

  What I want to do is, PC

  #1 switch mode 'sleep' when it has been idle longer than 10 minutes beginning at 10:30 and ending at 02:30.

  #2 wake up at 05:55.

  It was working fine until I disabled the two tasks for a few weeks, because I wanted the PC to stay on 24/7, and then re enabled them.

  The PC wakes up now at 05:55 (while leaving no log entry in the task history), then the task of "put the pc to sleep" he puts to sleep 15 minutes later.

  "Wake PC.xml.

  2014-03 - 18 T 11: 49:10.0991618 MSIi5\Sqrly PC wakes 2014-03 - 18 T 05: 55:00real1S-1-5-18HighestAvailableIgnoreNewfalsefalsetruefalsefalsetruefalsetruetruefalsefalsetrueP3D7cmd.exe/c "exit"

  "Put the PC to Sleep.xml '.

  2014-03 - 18 T 11: 33:16.4242597 MSIi5\Sqrly Met the PC in sleep mode when idle for more information, then 10 minutes after 22:30 2014-03 - 18 T 22:30:00PT4Htrue1MSIi5\SqrlyInteractiveTokenHighestAvailableIgnoreNewfalsefalsetruetruefalsePT10MPT30MtruetruetruetruefalsetruefalsePT4H7PT15M16rundll32.exepowrprof.dll, SetSuspendState 0,1,0

  In my view, that it is a question too simple for TechNet. I was able to get the conflict. I also changed the task of awakening to do something useful instead of running just an empty cmd.

  I now update the signature for MSE file. Please mark my answer as the answer. I paste in the task that is exported for someone else who may want to use it.

  -' Wake up the PC.

  -http://schemas.microsoft.com/windows/2004/02/mit/task"version ="1.2">

  -

  2014 03-18 T 11: 49:10.0991618

  MSIi5\Sqrly

  Wake up PC to run a quick scan

  -

  -

  2014 03-18 T 05: 55:00

  true

  -

  1

  -

  -

  S-1-5-18

  HighestAvailable

  -

  IgnoreNew

  fake

  fake

  true

  fake

  fake

  -

  true

  fake

  true

  true

  fake

  fake

  true

  P3D

  7

  -

  -

  "C:\Program Files\Microsoft Security Client\MpCmdRun.exe"

  -SignatureUpdate

  -"Put the PC to sleep '.

  -http://schemas.microsoft.com/windows/2004/02/mit/task"version ="1.2">

  -

  2014 03-18 T 11: 33:16.4242597

  MSIi5\Sqrly

  Put the PC to sleep if inactive for more than 10 minutes then after 22:30

  -

  -

  2014 03-18 T 22:30:00

  PT4H

  true

  -

  1

  -

  -

  MSIi5\Sqrly

  InteractiveToken

  HighestAvailable

  -

  IgnoreNew

  fake

  fake

  true

  true

  fake

  -

  PT10M

  PT15M

  true

  true

  true

  true

  fake

  true

  fake

  PT4H

  7

  -

  PT15M

  4

  -

  -

  Rundll32.exe

  Powrprof.dll, SetSuspendState 0,1,0

• iMac, sleep and wake up too often

  I noticed the USB external climb the spinning very frequently on the occasions and I was wondering if anyone had some ideas.  Today, some bozo was trying to hack my ssh key access only and I saw it in the system.log

  20 Feb 11:02:20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4847 to 192.168.1.21.22

  20 February 11:03:25 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4100 to 192.168.1.21.22

  20 February 11:04:31 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.2682 to 192.168.1.21.22

  11:05:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3920 to 192.168.1.21.22

  20 Feb 11:06:24 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1139 to 192.168.1.21.22

  20 Feb 11:07:27 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4675 to 192.168.1.21.22

  20 Feb 11:08:27 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1067 to 192.168.1.21.22

  11:09:30 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1077 to 192.168.1.21.22

  20 Feb 11:10:30 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4604 to 192.168.1.21.22

  11:11:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3898 to 192.168.1.21.22

  11:12:26 Feb 20 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.3846 to 192.168.1.21.22

  20 Feb 11:13:24 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.1178 to 192.168.1.21.22

  20 February 11:14:26 imac kernel [0]: AppleBCM5701Ethernet [en0]: Wake reason: Enet.Service - attempt to connect with c0:c1:c0:cd:71:91 TCP 222.186.21.72.4497 to 192.168.1.21.22

  My question is why is go it mac sleep so fast and then wake up again when you access?  Power settings are:

  In use:

  standby mode 0

  Sleep on the power button 1

  womp 1

  halfdim 1

  hibernatefile/var/vm/drag

  PowerNap 0

  gpuswitch 2

  automatic restart 1

  networkoversleep 0

  disksleep 0

  Sleep 10

  autopoweroffdelay 14400

  hibernatemode 0

  autopoweroff 1

  ttyskeepawake 1

  displaysleep 10

  standbydelay 1

  A secondary question is why does have the external USB drive go upward because some accessible a network port?  Nothing on the disc has been consulted.

  Thank you!

  You will need to turn off the wake for network access in the energy saving settings.

• Windows 7 is extremely slow going sleep and wake.

  I timed it the other day; It has taken almost five minutes for Windows enter the mode 'sleep'. I tried to turn it back on, and it took literally five minutes before the logon screen appears. She does on a regular basis, and it starts to become very irritating. I tried to update my drivers, but Device Manager claims they are up-to-date. If it helps, I run the 64-bit version on a HP laptop with 4 GB of ram. The processor is an AMD Turion 64 X 2 TL - 60 to 2 GHz. I can provide more information if necessary. If anyone has any advice at all, it would be greatly appreciated. Thank you!

  A problem of incompatibility for 7 with your chiopset drivers (ACPI). You can try to find the Win 7 drivers on the website of the manufacturer of the system and on Windows Update.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Portege M800 - mode 'sleep' and wake up fails

  Hi all

  you just bought a new Portege M800 running Vista.

  When the system goes into sleepmode or put into hibernation, there are not any what posisbility to wake up the system. I have to remove the battery is reactivated.

  Downloaded and installed the latest version of the BIOS, does all the Vista updates. Also checked the BIOS, the wake on LAN and the wake of keyboard are enabled
  Anyone else having this problem?

  Meanwhile, I've disabled hiernation and sleepmode in Vista, but this should not be the way to do it.

  Any advice much appreciated
  See you soon
  Dave

  Hello

  I m not a Portege M800 owner but normally I would say that you should try to update the BIOS and install all Windows updates, but you already have it not.

  What can you do now? If you have installed your own version Windows try again with the factory settings. Maybe it has something to do with software or then I don't know m.

  If it doesn t work I think you'll need professional help to an authorized service provider. Technicians can check your parts defective laptop hardware and trade if it of necessary.
  Here, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider
  Welcome them

• HP Envy D410a computer sleep and offline wireless OSX problem

  Hello

  I'm new but I searched on this forum as well as the apple support forum to get answers.  The problem, I tried to correct is limited to the Wireless business.   I'm under 10.6.7 OSX and Windows 7 64-bit.  Now I can constantly reproduce the problem of the printer goes offline on a Mac, but the D410a works perfectly with Windows 7 64 bit.  I can stop the windows computer or put it to sleep and to restore power or he wake D410a functions perfectly.

  When I put my Mac to sleep then wake him up, I lose the connection to the D410a.  Specifically, I'm trying to print or scan him unsuccessfully using "Preview", the HP Scan 3 utility, as well as the location of Print & Fax that allows you access to the parser.  Try several suggestions throughout these forums, I was able to partially address the problem. I read on the issue of the "Energy Saving" being a problem feature.  I tried power saving setting in the options "after 5 minutes of inactivity" and "after 15 minutes of inactivity'.  But the problem seems to come from the Mac.

  I put my IP on the D410a address to an IP address outside DHCP (static IP).   I fiddled with the configuration of the router, ensure that the printer signal is strong, or that the router is to remember its location.  I played a bit with port forwarding, (don't know what I was really doing). I have checked the firewall settings on the Mac, and they turned off the coast.

  Now as I said earlier, the only way I can get the D410a to respond to any request of Mac such as printing or scanning wireless. is either entering in my router (Dlink DIR - 655-cutting) and make some changes and save the settings.  I guess that's somehow resets the D410a and becomes available on my Mac.  The other way I can 'Reset printer' is on the print server and playing with a few features.  Specifically, I changed the gateway to 0.0.0.0 and the printer printed what was on the qeue.  After having put the Mac to sleep he lost the connection.  I changed the gateway to 192.168.2.1 and the printer and the scanner have been "reset".  Finally, it loses the connection to the Mac.

  Please, help me with smoothing this mess.  I like to use Windows, but there are things on my Mac that require the use of the D410a.  Have work would improve my workflow.  I just got this printer today and I'd rather not go through the hassle to return because I bought this printer for its quality of size and compact construction.

  ... I forgot to mention that I tried to completely reinstall the software.  I also tried an installation of the drivers in a specific order.  1 uninstall the HP drivers > restart Mac > add printer drivers and install Apple HP > download full HP drivers from the website and install.

  Check if your router multicast/IGMP proxy and transmission to enable them if they are not. They mess with re-discovery service of HP I think.

  Let me know if it works

• Windows Mobile 8 turns is not on after sleep.

  I have a Haier laptop with windows 8 is installed. Few days back my laptop got problem with mode 'sleep', it might be light not after sleep and I had to stop it to turn it on. This time after sleep, I tried to turn it on, but it has been set for the auto repair, after some time it says "Your PC couldn't be repaired" with options like system restore, refresh, reset, guest... Whenever I turn on the same process repeats... Now what should I do? Any suggestions?

  Since your laptop now Windows 8 OS, you will have an error "the inserted media is not valid" when inserting it with Windows 8.1. To get this fix you are trying to insert the media Windows with Windows 8 OSrecovery or installation. Then, try to update your PC or reset your PC. Otherwise, you must reinstall Windows 8.1 with your media recovery instead of use the refresh or Reset.

  Kind regards