HP 15r205tu: State failure in bootnig and unable to reduce the brightness of the display of power

Similar Questions

• Volume on the taskbar was hidden without changing the setting.__Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Volume on the taskbar was hidden without changed the setting.
  Try to reset the taskbar of the notification area, but the volume box is gray and unable to check the brandname.

  Missing notification icons:
  3 ways to recover...
  (1.) the easy way, if you're lucky:
  Right click on the task bar > click Properties > at the top, click on Notification area > can you put a check mark on the network? If so, you're done.

  If it is unclickable.
  2.) use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
  Depending on the version of Vista, you have, use the method two or three.
  One when you're done, return to #1 above and click on the box.

  3.) do a restore ysytem. Choose the date at which the icon was present under your restore point.
  Here is the tutorial:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  t-4-2

• I am unable to change the links page of the site and unable to see the file manager

  I have my site earlier designed by a guy, now he is not in contact, but I am unable to change the links page of the site and unable to see the file manager, even if I opened a session in Panel. admin help, please

  catalyst for business he did

  Did you get the site built through Muse?

  If this is the case then under settings, there will be an option to enable editing for content you will need to check.

  If this isn't the case, then the person who built the site you put authorized role which has no access to certain things, you can see that if you can go into the settings and roles and change it OR contact this person to give access you.

• I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  This has happened

  Each time Firefox opened

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press in and hold the Alt key to display the menu bar.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

  See also what happened to the file, edit and view menus?

• Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Everything on my screen has tripled in size how it back to the normal size, ps I tried the right hand winder on cone and it just reduces the font size not all things on the screen itself

  Your lowered obtained resolution. This can occur if you are running an older game that uses 800 x 600 for example.

  Control Panel > display > settings - change the resolution to correct for your monitor. MS - MVP - Elephant Boy computers - don't panic!

• Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Disable GPU acceleration. Under preferences-> Performance, clear the check box

• Installation of updates message and unable to use the system

  Original title: UPDATES going on all night?

  Yes I tried to disconnect on my computer and shut it down, and there was a lot of updates, that she needed... So so I expected to do all night and I woke and tried to use my computer, and he was still on the updates, I ended up having to manuelly turn off my computer, despite the cut the current attention, my question can someone tell me why this happened? How to fix, or should I just reinstall windows and set it so it is not update?

  Hi Microcough,

  1 have. the updates you tried to install?

  2. you receive messages or error codes?

  This problem can occur if updates failed to install.

  Method 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  Step 1:

  You can also view the history of update for updates failed which is causing the problem.

  Check out the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  You try to install the updates manually from download from the Microsoft Download Center and check if it helps.

  Check out the link:

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ExplorerFrame.dll is not working and unable to solve the problem of other similar positions. Who can help me?

  Windows Vista Edition Home Premium. I can't looking for photos, Control Panel, computer etc... He said: "class not registered" when I click on any folder. I googled the error and solutions must go to cmd.exe and type regsvr32 ExplorerFrame.dll. Do that and it doesn't work. I get a response that says: "ExplorerFrame.dll" module is not compatible with the version of Windows that you are running. Check if the module is compatible with a x 86 (32 bit) or x 64 (64-bit) version of regsvr32.exe. »

  I also tried sfc/scannow and that crosses and said errors were found and he was not able to fix all the. It's that I got. I hope that someone who has had this problem can help me find a solution.

  Kevin

  Hi Kevin, welcome Microsoft answers forum! You did changes to the computer? Have you installed the latest windows updates? Step 1: Check if windows is enabled, if not, go ahead and activate windows how to activate Windows Vista http://support.microsoft.com/kb/940315 step 2: install the latest windows updates.

  Step 3: Check with a different user profile

  If you do not have a different user account, you will need to create a.  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Step 4: Online a scanner for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  You can check the link that addresses a similar issue and try to install the hotfix mentioned in KB 935855 http://social.technet.microsoft.com/Forums/en-US/itprovistadesktopui/thread/1480f05f-f2a5-4e43-9c78-39ddf9193d93

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Bold 9000 Blackberry Smartphones - could not load any software and unable to use the phone

  Hello

  I have a blackberry bold 9000 and has been updated from the last app on this subject yesterday. Due to the low battrey my laptop turns off until the software has been installed to prperly. I tried the following:

  (1) to take the battrey and turn on the phone and tried to load the software again but that doesn't seem to work because the software does not recognize my phone it says unknown device.

  (2) I tried to use the option of updating the Web site, but also, which doesn't seem to work

  The display shows the following message appears when turned on.

  The application's permissions:

  The driving security application tries to access the information from the phone. I can't move the trackball on the appropriate option.

  Not really sure if there is a way to solve this problem.

  Help will be very appreciated. Thanks in advance.

  Concerning

  Ashish

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life.

  Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• Cannot use Windows + space and unable to see the language bar.

  Yesterday, I just did a full system recovery (at the original factory image). on my new laptop Dell which has windows 8.
  I had two languages in my preferences of Arabic and English
  Basically, the problem is that I can't use the shortcut Windows + space to change the language. everything works just Alt + Shift
  Also, this is not the language next to the clock bar! The taskbar looks like this

  

  and when I activate the indicator of "entry" system icons:
   
  It appears only as an empty space between the clock and the sound!

  

  also when I press Windows + I
  There is no language next to the power icon icon!
  

  Everything worked perfectly after recovery, but just after the execution of windows updates, he disappeared.
  I tried to remove Arabic and leaving only English alone and then add it back. but did not work
  also tried to change the settings here:
  
  also here
  
  but nothing has worked.
  so I restored all default settings and they don't currently exist in the two photos above.

  I already reinstalled the operating system!
  in any case, I did what you mentioned and did not work.
  Thank you.

• Unable to limit the display of the window reduced to Thunderbird

  Until a few weeks ago, I could reduce the window of Thunderbird to complete only half of my screen from left to right. Now, it will only minimize to about 2/3 of my screen. When I drag the edge to a closer position he goes only so far and stops. I don't know why suddenly this change happened. Is there a way to make the reduced window narrower Thunderbird? I use Windows 7 Professional Version and Thunderbird version 24.4.

  Is still there, the problem in safe mode? Hold Shift (Option: Mac) when you start TB.

  http://KB.mozillazine.org/Toolbar_or_windows_layout_not_working

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

  I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

  Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

  Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

• Unable to reduce the OS volume because the volume is corrupt

  While I was trying to shrink the c: volume OS on my system, an error pops up saying "the volume that you have selected to shrink is corrupt. Use CHKDSK to fix the problem of corruption and then try to reduce the volume again. »

  If this means that my windows is corrupt, or it's a hardware problem?

  So, I open 'cmd' and tried to run chkdsk/f on the C drive. But this message appeared

  'Cannot lock the current drive.

  Chkdsk cannot run because the volume is in use by another process.  You want to schedule this volume to be

  check the next time the system restarts? (Y/N) ». To which I replied Yes.

  I tried to run the defragmentation by cmd as well and this message appeared 'the dirty bit is set on this volume. (0 x 89000015)"

  What it means?

  Please help me with the problem...

  This means that you must restart the computer and let chkdsk to try to fix the problem of corruption (chkdsk /f r)

  Are not trying to run defrag as this could make the problem worse.

  After chkdsk ends and you restart Windows, run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.