HP 1603 sr after replacement card mother message appears saying radiator fan failure even if the fan is ru
Although the fan runs off pc. What is a lower thermal paste?
He gave me the same problem with old MB. but I restarted several times until the total inoperable. I replaced the cpu and the heatsink and Mo
any advice will be great. replacement cpu is a used athlon 2.4, the MB and the new radiator. OS is xp family
wbzuk wrote... «.. . tried using original compaq recovery disk set, but get the message of recovery to another pc set. is it because of a different Mo? It's the same n/p... »
Same part number is a good start, but the replacement motherboard must be tattooed to you match the numbers of the computer. The tattoo is the process of writing to the system-specific data in a special area of the BIOS. These data, this is what is blocking your computer recovery discs or one of the same exact model. Many different computer models of HP may use the same motherboard and you may have had a different model.
Apart from having an authorized HP your tattoo machine, you could install an operating system to store bought. Your existing data should work with XP pro but don't forget that you will not use of the HP factory-installed software and/or programs.
Fran
Tags: HP Desktops
Similar Questions
-
Vista will not start after replacing card mother HP machine
* original title - new motherboard (gigabyte) replace dead on (asus) and vista don't launch *.
What should I do to continue using my original copy of windows vista on my hard drive. Or am I intended to buy a new copy?
I had a hp built machine with vista as os. the motherboard went bad, so I replaced it. Now I can not get Windows to start. All the hardware seems to work fine, bios is fine.
The configuration is now:
original Board was asus
New Board of Directors is gigabyte
same disk sata hard with vista os top
same Pentium dual core cpu
new graphics card
What should I do to continue using my original copy of windows vista on my hard drive. Or am I intended to buy a new copy?
I had a hp built machine with vista as os. the motherboard went bad, so I replaced it. Now I can not get Windows to start. All the hardware seems to work fine, bios is fine.
The configuration is now:
original Board was asus
New Board of Directors is gigabyte
same disk sata hard with vista os top
same Pentium dual core cpu
new graphics card
Hey fzsq5s
you have also an activation problem because your hp vista oem license is bound to the original material that it came installed
read the information about the oem and sales license in detail below
If your computer is pre-installed with vista, it is classified as an oem license and it is related to the material that it is 1 installed on
as in the foregoing any case at level or the replacement of the motherboard will be done in collaboration with the manufacturer of the computer in your case hp
If he had a retail license you might have upgraded or replace your motherboard you
but you then have to reinstall vista as the old drivers of the motherboard would be still installed
I hope that the foregoing explains things
Walter, the time zone traveller
-
Master collection key became invalid after replacement card mother macbookpro
Hello.
I had the motherboard replaced in my mac as it was originally from the regular crashes. Fortunately, it was still under warranty.
Since I came back from the shop of any adobe program is advertising my license key again. If I enter the serial number that is located on the box or in my page 'My products', it is said that it is invallid.
What should I do?
I do not have payd it much attention for awhile, but now that I need to use certain adobe programs once again it becomes suddenly important. That's how these things happen
Trogador_NL serial number you have registered on your account has expired on 01/12/2014. I recommend that contact you the party or organization that provided the serial number for a new serial number.
You also do a volume for Web Premium CS5.5 license, which is still topical. If you need installation files, so they will be available at https://licensing.adobe.com/.
-
I tried to install the new version of iTunes several times and when I do I get an error message saying: I don't have the possibility to uninstall iTunes and I need to contact a system administrator
Hi ToriLS93,
· You are the administrator of the computer?
· What is you receive the exact error message?
It seems that you are not the administrator of the computer and just a standard user. If so, you wouldn't have the ability to install software. You may need to contact the administrator of the computer to help you do it.
For more information, see:
Microsoft Windows XP - Types of user accounts
Please respond with more information so we can help you best.
-
I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10. I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium. What should I do to get loaded and enabled on my computer?
That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
-
original title: require authorization of the SYSTEM
I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own. However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file. I am using an administrator account, but I can't just simply delete the file. I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it. The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there. Thanks for the help.
Hello
Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.
Note: here, "the record" as a subject refers to the folder that you want to remove.
Step 1: Go to the built-in Administrator account, you can do so by following these steps:
a. go to control panel > system and security > administrative tools
b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
c. right click on the administrator account that appears in the list and select Properties
d. uncheck "account is disabled" and confirm by pressing OKStep 2: Connect to your newly activated administrator account
Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
I'm going to make the assumption that you want to remove a folder and all its subfolders along
a. right click on the folder
b. go to the security on the top tab
c. click on the Advanced button which is at the bottom: Step 4 the first part to configure security settings to set the owner of the folder:
a. go to the owner on the top tab
b. click the button change located downstairs
c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
(d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
-Click on the button "other users or groups...". "who's down
-Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
-Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
-Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
f. check 'Replace the owner of subcontainers and objects' to propagate our change
g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see youStep 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
b. go to the permissions on the top tab
c. click on the button "Change permissions" which is down
d. at the bottom, there should be 2 check boxes:
-' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
-' Replace all permissions of child object with permissions inheritable this object': check this
e. press OK to confirm. Windows will warn you this time; Click OK
f. reconfirm by pressing OK; now, you should get to properties againNow, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it. -
I have a hp laptop with Windows 8.
Whenever I turn my laptop on, it flashes with a blue message appearing saying "your PC came across a problem..." »
I tried repeatedly pressing f8 as soon as I start my pc, however nothing appears when I try this.
Is that what I can do to fix this?
Original title: System Restore
Hello
Check with the help of HP, their online documentation and drivers, diagnostics and ask
in their forums on known problems.HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=========================
In 'some' case will help this article.
Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
online systems), their resources and the drivers and ask in their forums (if any)
on known problems. Don't forget to update BIOS, drivers of low level chipset,
and the other pilots of major on-board and separate devices. Those who alone can
set all or part of these issues.Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate Windows 7 methods and use them on Windows 8.
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Start Windows (applies to Windows 8). If you cannot start Windows 8 try using a repair
Disc (see methods of doing a below) to access Mode without failure and other troubleshooting
steps.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also, Windows 7 and Windows 8)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) to in a
second or so time of the BSOD to provide more information as possible
cause: see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html===========================================================
Windows 8 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you have need of a system repair disc or other methods:
How to create a "system repair disc" (CD/DVD) in Windows 8
http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.htmlHow to create a recovery USB in Windows 8
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html
How to start on the "System Recovery Options" in Windows 8
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.htmlBoot to the tip "Startup parameters" in Windows 8
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
A message appears indicating there is no emails in the Inbox, but when I go to spam my emails there.
original title: Mail goes into the wrong boxHi Sheila,
If you use Windows Live Mail I would say looking at this thread:It can also be good to post on the Windows Live forums located here: -
- Hi, I searched high and low for the answers! I searched all over the internet
ten hours! - I'm having a problem with my windows install!
- Everytime I try to download or install anything a message appears saying that my installer was not installed correctly?
- I had my computer for 5 years and have not had a problem like this happen!
- I tried the start menu then pressed the guest who took me to the black screen, I then typed in the cod for the Msi and I then pressed on enter and nothing came?
- But I know that there is something wrong with my installer because when I try to download or install something that to happen (but, when I press the run button, nothing happens?) I do not know???
- Can someone please! I have Windows Vista Home Premium 32 bit! Thank you
original title: Hi, I searched high and low for the answers! I searched all over the internet!- Hi, I searched high and low for the answers! I searched all over the internet
ten hours! - I'm having a problem with my windows install!
- Everytime I try to download or install anything a message appears saying that my installer was not installed correctly?
- I had my computer for 5 years and have not had a problem like this happen!
- I tried the start menu then pressed the guest who took me to the black screen, I then typed in the cod for the Msi and I then pressed on enter and nothing came?
- But I know that there is something wrong with my installer because when I try to download or install something that to happen (but, when I press the run button, nothing happens?) I do not know???
- Can someone please! I have Windows Vista Home Premium 32 bit! Thank you
See this last answer of this forum:
Note: ignore the itunes, the iphone part.
The response is universal. - Hi, I searched high and low for the answers! I searched all over the internet
-
Whenever I start my PC, a message appears, says another user using the same IP address.
Is this a problemYes. One or both may not work properly. If you use static IP ADDRESS a simple reboot of all devices should correct this.
-
When I want to post temporary my site BusinessCatalyst, I have a message that says: your account does'nt have the right to publish temporary...
Is there anyone who has had the same problem?
Hello
What's happening because you Adobe ID are not still bound with Business Catalyst. To get this done please, try now.
- Access Adobe Business Catalyst
- Click on "GET STARTED FREE."
- Continue with steps such as sing, creating a site, naming it and continue. This will create a temporary site for you on BC and it will connect your Adobe ID with BC.
Note: in this process, if you are invited to register and then ignore it and select the option already have an Adobe ID? Connect
Kind regards
Vivek
-
I bought a subscription to a cloud creative adobe Photoshop and Lightroom. When I go on the site of adobe and then try to download the software, a message appears saying that safari can't open a page that starts with "Mao."
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
-
Trying to upgrade from lightroom 5 to 6. Do not have a ser # for the 5 Lightroom. My lightroom 5 came as a 'bundle' with the purchase of a camera. When you install the downloaded lightroom 6 a message appears saying: he can't find a product calling it on my computer. My question is the "grouped" lightroom 5 calls be upgraded or why I have to by the full 6 Lightroom. Paul
I THINK that the on-board version 5 is not eligible, but since I don't work for adobe, click on the link below, during the hours listed
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera. I have a Nikon 5100 digital SLR. He has always displayed them in the past. How do I get to view these photos in Bridge, then open them in RAW?
Your Nikon 5100 requires a minimum of 6.4 ACR.
The ACR, which is installed with CS5 default is 6.0.
You must update your ACR to the latest version available for CS5 - ACR 6.7
-
Replacement card mother Qosmio G10
After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:
1. second HARD drive internal no more seen.
2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
3. always on cooling fan.Upgrade the motherboard consisted of:
1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
2. loading the CD-ROM TCN0000006 official update tool.
3. no recovery BIOS or EC/KBC.Any idea?
I m wondering how you did update the information in the DMI?
As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
So maybe his bad card mother
Maybe you are looking for
-
Hello I've updated my laptop HP for Windows - 10 - PRO EDITION (64-bit).Update went well. All the drivers seem to be installed device and work. Operating system works very well. I'm having a problem with sleep / Hibrernation modes. When I close the l
-
Writing in the spreadsheet in a loop file?
Hello I'm writing a series of images in a spreadsheet file. It's basically a video which has about 540 frames each frame is 1780 X 500 pixels. I run a loop that takes acquires a frame stack of images and writes a .txt file. This operation for the giv
-
The games are compatible with vista 64 is fallout 3, the other is nhl 09. I have installed all updates for vista. I meet all requirments system for games, this computer is about 5 days old. Games both were purchased directly from a store. I don't kno
-
The last thing I did was to download the service pack and tried to restart my computer. It wouldn't start, and now it is locked. This is the error message I got. "a problem has been detected and windows has shut down to prevent damage to your comput
-
How can I transfer all the contacts in my address book to my laptop?
How can I transfer all the contacts in my address book to my laptop? Thank you Charles Original title: ADDRESS BOOK