HP 17' want i5: accelerator.exe wit problem after update of windows 10

After you install the new version of windows 10 February 2016, I get an error message on startup accelerator.exe. When HP will fix the problem of driver?

Hello:

See if it works...

Download and save this driver.  Do not run it immediately.

FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71839.exe

Go to Device Manager and expand the category system devices.

Find the HP Mobile Data Protection sensor.

Right-click on the device and select uninstall.

Also check the uninstalling the driver box.

Restart the PC and then install the driver that you have downloaded.

Restart the PC again after installing the driver.

Tags: Notebooks

Similar Questions

  • Problems after update of Windows 8

    I have 3 HP Sleekbooks same spec, 2 are running Windows 8 64 bits and 1 running Windows 7 Home Premium 64 - Bit.

    On one of the Windows 8 units that he started having unexplained problems with the internet, when you first start internet would work. Trying to play Club Penguin crashed the browser, no error it just stopped responding. Also try to connect to my router config page would do the same thing. Once IE has stopped responding that you couldn't go to any site, on the desktop a browser just empty page would be displayed without address. Running of the subway I / f the big E is displayed on a blue background for about 10 seconds and then returns to the metro I / f.

    I tried allsorts to solve the problem, but ended up reloading of the laptop. Everything worked great until I did the updates of Windows and then the problem comes back. As a work around Club Penguin worked fine on Chrome, I thought it must just be a strange problem with the laptop.

    The 2nd laptop Windows 8 worked very well, Windows Update had not been performed for about 2 weeks on this laptop. I was installing a new software and decided to update Windows as well. Exactly the same problem occurred, but IE had trouble to access almost all sites. I have restored the PC before the updates and it works again.

    The Windows 7 machine has all the updates and works very well.

    Is there a problem with the last batch of updates for Windows 8?

    Anyone else had similar problems?

    I did a little test and I think that I found the cause of the problem.

    Laptop 2 - this is the one I restored to before the updates. I've installed every update, one at a time and not a whole lot. So far no problem.

    Laptop 1 - I removed the patches that I have installed on the computer laptop 2, the problem was still present. I then installed to each update one by one. I still have the same problems, internet intermittent and unable to use Club Penguin or connect to my router. I had already tried resetting IE but still made once without success.

    I then looked in the error log and the only error that seems to occur at the same time was the following:

    HTTPEvent

    The settings of SSL certificate created by a process admin for endpoint: 0.0.0.0:52000

    Did a search online above and found a reference to 360 from Symantec, we use Defender antivirus but we use Norton Family for parental control.

    I uninstalled Norton Family and everything started working again. What is really strange, is that these laptops are for my children and I was connect using my account admin but Norton Family does not monitor this account, but still problems.

    I have re-installed Norton Family and the problem came back.

    All thoughts, I don't want to leave children unprotected online.

  • Problems after updating to Windows 8

    I had some problems with my new laptop so I decided to try the «Refresh your PC» function Doing so brought on a slew of new problems which I had no chance to solve on my own. I hope someone knows what to do with this mess.

    After "refreshing" to my PC, my laptop wouldn't let me:
    Install anything (downloads are OK, though)
    Programs open (with the exception of Internet Explorer)
    Applications open
    Open C: /.
    Open the laptop settings
    Solve problems ("an error has occurred during troubleshooting.")

    It became obvious to me that the majority of these problems were because the updating of Windows me rid of my administrative privileges.

    I tried to solve this problem with every idea that I had and every suggestion I could find online. The problem is that my phone won't allow me to do anything to capture administrative privileges.

    Here are the solutions I tried:
    'Change the Type of account' in the user accounts: parameters show that I am already administrator.  The 'Standard' option is greyed out. Nothing to do here.

    Using a command prompt: everything I try, I get the "Network Error" result... "Windows cannot access to ' if I get" net user administrator / Active: Yes "I received the reply"the system 5 error has occurred. Access is denied. "I can only assume this error occurs because I'm not an administrator. If I try to do "sfc/scannow" it says "You must be an administrator." However it won't let me run cmd as administrator.

    Exchange User Account Control: the bar is set on "notify me only when...". ». I can drag down to "Never notify", but when I try to click on 'OK' will not just pass by. I could click OK all day and nothing will happen. No error message.
    Create a new user: hit this button head to PC settings, which does not, as previously stated.
    Clean boot: Msconfig will not open, I get the error message "network error". Windows cannot access.
    Switch to the Microsoft account: 'Users' directs 'PC settings", which is an application that does not open.
    CHKDSK: whatever it is, I have no idea, but it does not open.

    If I try to "Run as Administrator" on any program, it simply doesn't. No error message.

    I reached the end of my rope after trying several solutions more that hasn't worked and tried to do a system restore. System Restore does not open. I get the error message "System Restore could not start." I would try to solve the problems, but as I said troubleshooting will not, work almost everything also, runs to the PC settings application, which does not open.

    None of these problems existed before I did the update of Windows, so I can only assume what caused their - which is a little disconcerting.

    Any ideas on what to do?

    I had this problem after that refreshing of my pc, if yours is the same (if it could even be your best solution) you will need to make a new account

    Windows + x

    go to "Control Panel".

    go to "user accounts and family safety."

    Press 'user account '.

    Press 'manage other accounts '.

    In light blue shades near the bottom, it says "add a new user".

    Follow all instructions after that to make your new account

    Sorry I couldn't be more helpful. If all else fails, it's the only way I know how to deal with it

    E-mail address is removed from the privacy *.

  • Pavilion DV6 6154 TX: Problems after update to windows 10

    I upgraded my OS from windows edition laptop home premium windows 10. Then, I am facing so many problems with OS (black screen, striking cursor before start up and bluetooth disabled and not able to update to the new version of Bluetooth).

    So I think going to the earlier version of windows, but I have some doubts in this regard. Please find me answers to the following questions.

    (1) if I come back to windows 7, will solve my problems?
    (2) if suppose I have restored to windows 7 to 10, I was able to again update windows 7 10 may?

    dabbada wrote:

    (1) if I come back to windows 7, will solve my problems?
    (2) if suppose I have restored to windows 7 to 10, I was able to again update windows 7 10 may?

    Hello

    Thanks for posting in the Forum from HP Support.

    REP 1) If you didn't have a problem with Windows 7 but only with Windows 10, probably the problems resolve and will not happen on Win 7. I can't guarantee 100% but it seems normal.

    REP 2) Yes, if you go back to your previous operating system (aka Win 7), you will be able to try to Win 10 later if you wish.

    A few tips:

    > > If you want to try to solve your problems of Windows 10 without going back to Win 7, you can try to download/install HP Support Assistant

    http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

    http://support.HP.com/us-en/document/c03467905

    Please, download it, it's about 39 MB, run it and update all the drivers and all of the HP software.

    Please, go to the control panel and make sure that your Windows is fully updated

    > > If this is not enough, here are the instructions how to return to Win 7 (they only work if you upgraded to Win 10 in the last 30 days):

    http://www.howtogeek.com/220723/how-to-uninstall-Windows-10-and-downgrade-to-Windows-7-or-8.1/

    http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

    Once you return to Win 7 and if you later decide to reinstall Win 10, note that the free update will be available until the fall of 2016. Here are the instructions how to upgrade to Windows 10 (please use the USB/ISO method) > > http://support.hp.com/us-en/document/c04730900

  • Dell Inspiron 3442 Maxx Audio problem after update of Windows 10

    I have seen a lot of posts on this same problem with Maxx Audio in Windows 10, however, I tried to fix it by trying different solutions, that users have given and I had no chance. I uninstalled the driver and reinstalled the Dell expects W10 and Maxx Audio controls do not work. Someone said that they have installed the old drivers for W8.1 and it worked again, I tried it and the controls are there, but when I try to disable Audio Maxx, it does nothing and I close the window, open again and the bar is activated if, it turns off. No idea if I'm doing something wrong? It's a problem very annoying for me since I work with many audio and now it sounds just awful! :(

    Much to my anger and regret, Dell didn't send any form of notification NO update to the platform Windows 10 and I did, then reverse it after seeing what a nightmare Windows 10 has, however, not only is now my audio DOES NOT WORK, but my departure to the top and stop sequence is ruined as well as on my laptop Dell.  I tired many times to count to reinstall the drivers for the audio, but it doesn't seem to recognize the audio driver of Dell on Microsoft which is also... UGH... Help... I WANT ONLY THINGS TO WORK AS BEFORE...

    SOMEONE THERE IDEAS FOR HELP?  THANK YOU FOR THE MILLION

  • HP pavilion p184ca 15: hp pavilion p184ca 15 limited wifi connection problem after update my window 8.1 for windows 10

    Please help me to solve this problem from my computer, that my hp Pavilion 15 p184ca is now limited WiFi connection after my window 8.1 for windows 10. hope you guys can help me and I know that many more hp customers are waiting for your response to my problem. Thanks in advance guys

    Hello

    Please install WIFI drivers and restart the device

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P100-notebook-PC-series/7234915/model/7551299#Z7_3054ICK0KGTE30AQO5O3KA30R1

  • Problem after update of windows 8

    Help

    I refreshed win8 and now winexplorer show that I have most of my hard drive space taken, but none of the programs that take this memory (since before the discount) are currently not visible in programx86.

    How can I clean my hard drive?

    Hello

    I understand that looking for ways to clean your hard drive and clean space on it.

    Please refer to the below section that will give you suggestions for cleaning hard drives:

    http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

    Answer please if you still need help.

  • battery problem on sony vaio z3 after update of windows 8

    I had to disable the utilitiy ISB in the Task Manager, because the system wanted to put the computer into hibernation because of a battery problem.  I had the same problem after updating the driver control of battery.  How should I proceed?

    Hi user 975909,

    That is right.

    Nick-

  • HD T410s graphic problem after update

    A few days ago, I decided to update my 2011 T410s by Lenovo
    Toolbox. I was looking for solutions to improve the battery life. I have
    has chosen to update all 'important' and some option updates
    those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)

    Since I have lived a graphic break several times when I watch videos online such as
    thedailyshow.com or youtube.com. The first time a
    a message on the graphics driver (or something like that)
    has stopped working and has been restored but the next second the
    ventilation was repeated, monitor would go black and the
    graphics would begin slowly reappear, I'd still get a message
    on the graphics driver and the other second monitor would again
    black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
    the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.

    Suggestions? Is someone else had problems after updating?

    Please uninstall the display driver, and reinstall.

    Also, install the latest player adobe flash.

    Please watch the video file online and then check it in.

    Best regards

    Tanuj

  • Problem with update of windows 10

    During the update to windows 10 my laptop has been shutdown, the update to windows 10 now not restart. It ask me to reboot the laptop. What is wrong with him?

    Hello

    Thanks for posting your question in the Microsoft Community.

    I understand that it must be difficult for you, when things do not work as it should. I'm sorry to know that you are facing this problem.

    Please answer these questions to get more clarity on this issue:

    • What is the brand and model of the pc?

    • You have a wired network connection?

    You must first upgrade your pc from Windows 8 to 8.1 Windows and then upgrade to Windows 10. Make sure that the power cable is plugged into the socket so that the laptop does not work on battery power during the update.

    First step, you can run the Windows Update Troubleshooter to check if that helps.

    You will be able to resolve some problems in running a convenience store will automatically fix some common problems with Windows Update.

    http://Windows.Microsoft.com/en-in/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

    In addition, you can use the ISO for upgrade to Windows 10.

    How to: upgrade from previous versions of Windows using the file ISO for Windows 10: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-upgrade-from-previous-versions-of-windows/31722b30-1da9-42bb-b331-0edc4649bf43

    Keep us in the loop to help you further.

  • Problem of update & photo Windows 8

    Several times I tried to 'update & Restart' my laptop that takes hours in a row, but starts can you back to say it is impossible to install the updates. I also noticed I can't see pictures in Windows Photo Viewer, or show icons for them. I don't know if it is separate from the update or not, but it's happening both now & I can't seem to find anything to help.

    It is likely that the two issues are interrelated. In this case, it is advisable to run the Windows Update Troubleshooter from the following link and check if this is useful:
    http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

    Hope this will help you.

  • Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used it without a problem after update 2015 cc adobe photoshop

    Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used without any problem after update 2015 cc adobe photoshop...

    Just installed 9.4 ACR it works for my RAW files. Camera Raw 9.4 now available

    And the following cc 2015 windows updates installed.

    Updates Windows Photoshop CC 2015
    File download Size Date Notes
    Update Adobe Photoshop CC 2015.1.2 (64-bit) 352 MB 20/01/2016 16.1.2 release
    Update Adobe Photoshop CC 2015.1.1 (64-bit) 352 MB 14/12/2015 16.1.1 release
    Adobe Photoshop CC 2015.1 update (64-bit) 352 MB 30/11/2015 16.1 release
    Update Adobe Photoshop CC 2015.0.1 (64-bit) 258 MB 03/08/2015 16.0.1 release

  • Problems after updating the BIOS on Satellite Pro P200

    I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

    After updating the BIOS, I have now two problems:

    1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

    2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

    Basically, I want to get everything working again as it should, but cannot find any information on these issues.

    After further review, it appears that the update of the BIOS is not the cause of the problems.

    Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

    After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

  • Keyboard problems after upgrade to Windows 10

    Hello

    I have problems with my keyboard as by chance after I had updated to windows 10. Right now my "6" does not work and when I press '5' key he made just the following '5666666666666666' and keep repeating 6s forever. If I press the left button down 'ctrl' it is also the exact same thing as the number five keys when you press. I ran utility troubleshooting of windows, so that my driver was updated, and can not solve the problem. Now I'll have to use an external keyboard to type this message. I wonder if I'm to potentially the keys being stripped or is it a problem of windows 10. It causes work very well when you type with the on-screen keyboard and an external keyboard. I have messaged microsoft and they told me the following:

    Method 1:
    Try changing the keyboard layout of the English (United States) type language in the search bar and try to change the layout of the keyboard and check if the problem persists. This is to check if this is due to the keyboard layout of the related issues.
    Method 2:
    Try to install the drivers for the keyboard in compatibility mode and check if the problem persists. This is to check if this is due because of compatibility issues.
    Now, to install in Compatibility Mode, follow these steps:

    a. Locate the executable file (.exe file) for the driver installation program.
    b. right click on the file and then click Properties.
    (c) in the Package name properties dialog box, click the Compatibility tab.
    d. Click to select run this program in compatibility mode for check box, click Windows 8 with which it is compatible with in the run this program in compatibility mode for the list, and then click OK.
    e. double-click the executable file to start the Setup program.

    problem is that I don't know how to do the second method

    Any suggestion would be great

    Thank you

    Hello

    There is usually no associated with a built-in keyboard driver. Looks like something is off with the material.

    It is unlikely that this would cause the actual update of Windows 10. It is possible that the connection between the buttons '5' and '6' are short-circuited, the computer stop typing "6" after a few hours.

    If you have a handy toothpick, run it on the sides of the 5 and 6 keys while the machine is turned off. It can clear all grime, press 6.

  • Problems after update SP2

    I installed the x 64 SP2 of Vista on my computer. So far, I have found two problems.
    1. Windows Defender is no longer automatically updated. I have to do a manual update, which means that I have to "remember" to do. Really want to have the automatic update to work again.
    2. I've noticed when I use & assistance, the graphics do not appear. I just get a glimpse of the box with the red X (as on a website, you get a placeholder for graphics).

    What should I do to solve these two problems?

    Before I updated the system to SP2, I have not either of these issues. That by applying the SP2 update.

    My computer: HP Pavilion dv7-1232nr (AMD x 64) Vista Home Premium X 64 SP2

    Thank you
    Barb

    Do you have an another "deep depth" in my two problems. Seems that window Defender had a problem with one of its updates and now Defender is back to update automatically.

    On the support application & - it's a matter of HP. When I uninstalled the aid applications from Hp, Microsoft Help application was 'perfect' in appearance. So now to 'chat' with HP on their software. In the meantime, thanks for your help.

    I'll mark this answer is thread.

    Barb my computer: HP Pavilion dv7-1232nr (AMD x 64) Vista Home Premium to the last level

Maybe you are looking for