HP 200 MFP M276nw not seen in the network after changing router

Printer: LaserJet Pro 200 color MFP M276nw

LAN: both PC (Windows 7) and the printer connected to the router.  Other devices connect wirelessly.  Internet service is cable.

I installed this printer when a router Linksys E2500 was in use.  The configuration of the network after the installation of the printer:

IPv4 address: 192.168.1.120

Subnet mask: 255.255.255.0

Default gateway: 192.168.1.1

Configured by IP: DHCP

I replaced the router Linksys with a Netgear WNDR4500 router (N900) a month ago.  Everything worked fine for about two weeks.  All of a sudden, jobs sent to the printer began to take a long time to start to print until they stopped printing altogether.  The printer does not appear as a device plugged (cable) in the interface of the router on the Web.  Not even the HP Print or HP Print software and the Scan doctor could find a printer is connected.

I have unisntalled and reinstall the printer, but did not succeed until I changed the Ethernet cable connecting the printer to the router.  The difference is that the old cable Cat5e and replacement a Cat6?  It's printing and scanning now but the printer is still absent as a wired device, and I fear that it will stop working once more.

I noticed that the network configuration of the printer after reinstalling is:

IPv4 address: 169.254.230.140

Subnet mask: 255.255.0.0

Default gateway: 169.254.230.140

Configured by IP: AUTOIP

Research on the Web, I found an article saying that AUTOIP could be a sign of problems of router or a cable.  My suspicion is that the IP address of the printer is constantly changing and this is the reason for the delay of printing.

My questions to the experts are: I could assign an IP address to the printer manually so I can add it in the router - it provides to this effect- and how this is done?   In the Toolbox of device HP under the IPv4 Configuration, there is a dropdown menu with different options - DHCP, BOOTP, AUTOIP, and manual, but I don't know if the changes are made here or if it's a more complex undertaking.

Thank you very much.

Kind regards

Miguel remainder

I solved the problem, the same day I posted the request for help.

I've closed everything down - including the cable modem and router - but left the printer.  Go to the printer control panel and changed is manual configuration IPv4 of AutoIP toe.  I had already selected an IP starting with 192, since I read that starting with 169 IP addresses are associated parameters AutoIP.  From there on, the printer has presented a valid subnet mask addresses, I took one, and a default gateway address.  Then I stopped the printer.

I turned on the modem, router, pc and printer.  The router then showed the printer as a device connected with his newly assigned IP address.

I figured that the cable was not a problem here, so I put the Ethernet Cat5e cable.  What baffles me, is why the printer changed to AutoIP because it was not made by any user.  Check the reports printed during the first installation of the printer, I see that the method of IP in DHCP address.  After putting in the new router, changes were to name SSID and password in wireless devices and found the firmware of the router.

It was learning by trial as I'm not a computer expert, but so far, we print and scan documents.

Thanks to all who took the time to read the post and offered help.

Tags: HP Printers

Similar Questions

  • Photosmart D110 not seen on the network

    My Photosmart D110 printer can be seen in the print of one of my devices dialog.  The printer is connected to the network with a valid IP address.  I can see the printer in the configuration menu of the router and ran a successful ping test.  Both the router and the printer have been reset.  The HP utility cannot see the printer, nor can any of the print dialogue.  I use a MacBook, a MacBook Pro, iPhone 4 and iPad.  What happened before several times and the other 60 turn power off and unplug both the router and the printer has solved the problem in the past.  Not this time.  Help.

    Hello

    Seems to me like the lack of support from Hello by the router or a misconfiguration.

    Any Apple device communicates with the device using Apple's Hello which relies on multicast DNS... which must also be supported by the router.

    Please specify your router brand and model to better understand what may cause the problem.

    Kind regards

    Shlomi

  • SPA942 not visible to the network after factory reset

    Hello

    A while ago someone at our office a factory reset on one of our Linksys SPA942 phones.  He thought that it worked (it worked flawlessly; but our router has decreased. Great).  The sad thing is, from the factory, it did not work.

    The problem is that no matter what we try - DHCP or static IP - we do not seem to make this device visible on our network. As in, type us its IP address in a browser and do not see the Setup page.

    We have tried everything we can think of.  Subnet mask is correct. Addresses DNS and IP - PBX (for not they should really make a difference) are correct.  I don't see what the problem is.

    Can someone please offer a suggestion, before go me crazy? !!!

    Thank you very much.

    Jarrod

    First of all, thank you for your response. It prompted me to do some play. Here are the results, in case anyone else having a similar problem (a cable by a novice/cheapskate) stumbles across this post...

    We don't have a SPA9000. Simply, we have a Belkin router wired to four points:

    1. downstairs IP - PBX - work

    2. downstairs SPA942 & PC - both work

    3. downstairs SPA942 & PC - both work

    4 floor SPA942 (does not work) & PC (work)

    So... all PC connect perfectly to the Internet and the network, as do both phones down.

    Following the principle of your simple suggestion ("make sure that it is correctly connected to the network") and the first rule of tech support ("is the computer plugged in, sir?"), I decided to reject the hypothesis that the handset was at fault and check if the connection upstairs was to blame (even if the PC we have up there connects very well).

    Bingo! Telephone three works when it is plugged downstairs. Phone two, which worked fine at the bottom, does not work on the floor.

    So now I know what the problem is... but have no idea WHY the problem is. Why don't the floor point network working perfectly for each device I care to plug in - office book server, ATA, fax, you name it - and not for the SPA942?

    I changed all the cables around the router, in order to verify if there was something wrong with a specific port. That has not changed anything. Assume that all router ports are fine.

    So what does this leave... the cable? Seems unlikely, but all other possibilities have been rejected.

    So, I put the phone on the floor downstairs and plugged directly on the router, using another length of cable. Knit then all three phones.

    Look closer to the floor and found wiring that it is three separate lengths of CAT5, joined with connectors RJ45 base (suppose cabler could not to allow/couldn't be bothered buying a cable length).

    Last question... it is likely one of the lengths is a cable cross/patch... that all the devices other than our SPA942 are smart enough to understand this and to compensate accordingly? How the office is wired, it is very tedious and precarious (12 foot ceilings, etc.) to get in there and change the cable lengths, but obviously do so if it is the likely culprit.

    Thanks again,

    JD

  • HP Deskjet 3510: Printer not connected to the Internet after new router purchase.

    After buying a new router, printer does not work. Is not connected to the Internet. I followed the instructions on how to connect but nothing I did helped. Wireless test results show the printer are currently configured with an automatic IP address, I don't know why or how this happened. Also shows that wireless and wireless is working and success to the configuration of the printer, just not connected to the Internet.

    Yes you will need a printer USB cable like this.

    http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?ie=UTF8&QID=1458167924&SR=8-1&keywords=printer+USB

  • OEM may not happen to the database after changing the port on the database

    Hello OEM gurus!

    I had to change the port on a database(11g) from 1521 to 1526. I adjusted the listeners to include the SID (finapp1t) in the listener listening on the port of 1526. I removed the SID of the OEM (10g btw) and rediscovered. He has rediscovered success.

    Now, I get the following when I try to enter in the "spaces" or "tables" on the page of database FINAPP1T:

    Listener refused the connection with the following error: ORA-12505, TNS:listener knows not currently SID given in connect descriptor is used by the client connect descriptor: (description = (address = (host = urora2t.unioncentral.com)(protocol=tcp) (port = 1521)) (connect_data = (sid = finapp1t) (server = dedicated)))

    I started then clean the Agent on the server, but I get the same results.

    OEM seems to think that this FINAPP1T of the database always uses port 1521. I can connect to the database on port 1526 to my office so I know that the listener see this database.

    How can I say OEM update port?

    Thanks for your help!

    Published by: sawright on March 29, 2012 10:33

    -What status of availability the console displays for the database?

    -In order to exclude the caching issues, you can log out of the console, reconnect, and then restart the connection to the database in question?

  • How do you decommssion a domain controller that has not been on the network of more than 200 days?

    Hello

    in our society, we have an old domain controller has been disconnected for more than 200 days, probably in a State of thumbstone, it still appears in our network. We wanted to know what is the best way of disused this server, we connect to our network and do normal downgrade process.

    How do you decommssion a domain controller that has not been on the network of more than 200 days?

    Could you please write me back to my work email or call me on my work phone? Job information are below.

    Hello

    The business support, you can find forums on TechNet, see the following links:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • Cannot complete the home network implementation to include this computer as it can not be seen on the network.

    Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

    Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

    Hello

    1. what makes you think that there are unidentified, firewalls running on the computer?
    2. what exactly happens when you try the home network configuration? You receive an error message?
    3. what exactly happens when you try to ping any computer on the network? Error message?
    4. what operating system is running on this computer? Also after return from the edition of these operating systems?

    See the following articles that might help you.
    How to troubleshoot a network home in Windows XP
    http://support.Microsoft.com/kb/308007

    5 steps: how to set up your network wireless home
    http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  • DRIVER FOR VISTA OR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS.

    DRIVER FOR VISTA FOR DELL 1600N MFP PRINTER NOT TO "DRIVE" THE FUNCTIONS. MORE SPECIFICALLY: 1) I CAN'T SCAN; 2.) I CAN'T REDUCE THE SIZE OF THE PAGE WHEN I PRINT. (3.) I CAN NOT SEND FAX.

    I INSTALLED THE RECOMMENDED DRIVE, BUT IT DOES NOT WORK. MY GUESS IS THAT I NEED TO UPGRADE VISTA TO A SUPERIOR VERSION OR A DOWNGRADE TO XP (WHICH THIS PRINTER WAS WORKING WELL ON).

    http://www.google.com.au/search?hl=en&source=HP&q=Dell+Support&Meta=&aq=f&aqi=G10&AQL=&OQ=&gs_rfai=

    Dell drivers and downloads.

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

    Contact Dell printer drivers re OK.

    See you soon.

    Mick Murphy - Microsoft partner

  • Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

    Altered photo is not seen in the module 'print '. (Win 10, lightroom 5.7.1.) What can I do to solve the problem?

    Next 'Units of the rule' in the layout, select the good 'units of the rule' in the drop down, and then set your margins.

  • All of a sudden, my folios not seen on the iPad

    I have successfully developed an application that is online on the Apple App store. (FYI) Yesterday, all of a sudden my folios would have not seen on the iPad. The message said that I had to open Adobe Content Viewer on the device, which I opened, but it will only preview the desktop. I checked the cables, I uninstalled Indesign. Reinstalled, updated tools DPS, restarted, trashed preferences. I don't know what to do now. Everything was fine until yesterday. What gives?

    Please visit http://status.adobedps.com/ and http://forums.adobe.com/thread/1175754.

    Neil

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • My UK 6s iPhone does not connect to the network in Germany?

    My UK 6s iPhone does not connect to the network in Germany?

    'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

  • Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

    Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

    Have you ever tried troubleshooting mentioned in this article?

    If you cannot connect to a cellular network or cellular data - Apple Support

  • HP Laserjet M1132 MFP is too slow on the network!

    Hello

    My HP Laserjet M1132 MFP is too slow on the network!

    I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

    I installed the last form HP driver site and update the firmware it the latest version.

    It happens on other Windows XP machines as well.

    I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

    I used the trick of local port on computers remote (instead of the normal method) like this:

    "add a local printer.
    "new port".
    "localport".
    \\XPcomputer\HPPrinterName port name

    but still nothing!

    There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

    I really appreciate your HELP!

    It seems that no one on the planet has the answer to this question!

    The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

    He wat the only solution for me.

  • OfficeJet Pro 8600 N911a not connect to the network

    Hello. I hope someone can offer a solution to my lack of connection network printers.

    I followed each step that I can find to understand why the printer is not connecting to the network. Including uninstalling/reinstalling, turn off and turn on all systems and following the steps help diagnosis HP.

    According to "the wireless network test results:

    Wireless: 'PASS '.

    Connectivity: Connected "does not work".

    Network: SSID found 'Pass '.

    Printer compatible with Wireless Router Settings 'Pass '.

    No filtering "Fail" (MAC address filtering is disabled - I double checked)

    Channel 'does not work '.

    Security 'Pass '.

    Help would be very appreciated.

    Thank you for your time.

    Hello

    Try following the steps below and check if this can help:

    http://support.HP.com/us-en/document/c02480179

Maybe you are looking for

  • Satellite 2805-S201: AC power light flashes orange 8 times

    Hello I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.After that, the AC power light flashes orange 8 times and recycle. It comes with power supply, battery, AC and no battery installed, etc. I

  • How can I restore my docs, photos and music to back up an external hard drive?

    I had to reset my Dell Dimension E521 to factory settings.  Before I did, I copied all my files, photos and music on a portable hard drive Western Digital.  How can I get my files, photo and music restored to my PC?  I tried to copy it to the PC, but

  • Aspire gel mouse/Touchpad V7 - 482PG when connect power cord (Windows 10)

    Greetings, I'm having this strange problem in my V7 after upgrade to Windows 10: When I plug the power cord of the keyboard and the touchpad and mouse gel (I use a Microsoft Bluetooth Mouse and touchpad in my V7 is a Synaptic). -If I unplug the power

  • HP pavilion g6 adobe installation problem

    I had a problem: (just vista)When I run the installer for Adobe Reader 8, I get this: screenshot I'm really happy if you guys can help me understand this. Coz I love my laptop HP... Thank you

  • Win7 Audacity does not record sound

    I tried to follow the instructions at http://win7mag.com/?p=151 to use Audacity (and Audiograbber) to record streaming audio of IE8. All devices are including people with disabilities. However, WaveMix isn't a choice.  So I chose stereo Mix Reltek Hi