HP 2000: Need drivers (or the installation disc) for HP 2000

I recently had to put a hard drive of hew on my HP 2000 (QE339UA #ABA), but miss me the AMD chipset drivers. I can't find my original disks. Can anyone help? I would like to get a copy of the original disc I need too. I'd appreciate any help.

Hello:

You must get the AMD chipset drivers.

Download and install the driver first on the list from the link below.

http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

Tags: Notebooks

Perform an upgrade of Windows 7 installation or an earlier version

You can upgrade to the existing installations of Windows XP or Vista to Windows 7. You need at least 10 GB of free space on your Windows partition.

Start your Mac in OS X.
Use the tables at the end of this article to make sure that you have a Mac that takes in charge the version of Windows that you are installing.
Download software support for Windows (drivers) bound to the table, or locate the OS X Install or the restore disc supplied with your Mac so rated.
Decompress (unzip) download it and place it on a USB drive formatted in FAT (MS-DOS). Let this flash drive connected to your Mac during installation.
Start your Mac from the version of Windows that you currently have installed.
Use the Windows Installer to upgrade to Windows.
After Windows Setup is complete, your Mac starts in Windows. In Windows, open the file "BootCamp.exe" on your USB stick or the installation disc supplied with your Mac. Follow the prompts on the screen to install the related drivers for your Mac.

After the driver installation is complete, connect to Windows to start using it on your Mac.

Have a great day!

need to get the installation for vmware Tools packages

Hello
With the help of ESX 4. I need to get the installation packages for the vmware tools for each version of Windows Server 2008 R2, Windows Server 2008 (x 86 and x 64) and Windows Server 2003 (x 86 and x 64).
1. where can I get them?
2 support without monitoring/silent install? I need to add them to an existing deployment routine.
Thanks in advance!

All the tools on your ESX host .iso files can be found in
```
/vmimages/tools-isoimages/
```
There is a way to push tools, but part of the upgrade tools are NETWORK card drivers and you can lose some pings or experience of ping times raised the expectations of the customers.

An example of a sudden of thumb through AD is http://itknowledgeexchange.techtarget.com/virtualization-pro/how-to-install-vmware-tools-through-windows-group-policy/

I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

The serial number of the computer has nothing to do with the product key for Windows.

What happened when you tried to install Xp with sp3? If you do not have the original for the computer that you use to install Windows?

You can try to contact the manufacturer of the computer who may be able to provide the recovery disc. The disks are usually under $ 20.

install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

I managed to install the software on my laptop using windows 7.

spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

have tried to install it on the internet from the site of epson, but same error

any help would be greatly appreciated

< have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
Do you mean that you have downloaded the Epson driver?

http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

If that wouldn't work, try to run the System File Checker:

Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
http://support.Microsoft.com/kb/929833?WA=wsignin1.0

Help! Maybe I need the recovery disc for pavilion d4790y... + I think I messed...

I had problems with my office for awhile now, think it might be a fan, virus, hard drive or ram as in my previous post... the computer would freeze/crash or not stop, requiring a firm hard. trying to reboot/restart computer, it would beep several times until I have let it sit for a few minutes, then everything was back to normal (found that might have been an error in the BIOS after all this happened)...

Now, I have NOT touched or replaced all the components on my computer at all. Nothing! Now I have a debate on the upgrade of OS and RAM, but did not decide whether it was worth on this older machine. So I have done no amendment or change in software. the only change I made to it was not renew norton and goes with vast (free).

The other day, it suddenly wouldn't boot Win Vista 32 in all. My monitor at startup (before config utility appears) had colored vertical lines across the screen. I immediately thought 'virus' or ' fan isn't card graphic blown is screwed/false driver downloaded... I enter safe mode with network, no problem with the monitor (no lines) and tried driver restore, but also to download nividia the updated. Nothing seemed to work except safe mode (s), system configuration, start the Setup program, CTRL I (don't remember which menu is), & screen of the system restore/repair/diagnose. I tried all the reboot thing pilots config, patterns of change (hard disk only), boot it. When you go to the splash screen (a back screen on startup), no line either... I tried the system restore, did not a thing... I tried the verification of diagnosis, all right... all equipment, the repair of the system did nothing...

So I take the side box power off to check the components inside to see if any wiring was loose, fans not working/salty, etc... everything OK there besides fan a little dirty. Clean, same thing. Here comes the fun part...

Now, I backed up all my files and 'backup' on my external hard drive... I thought that I had made the recovery discs or he had came with it when I bought it... I changed the configuration settings RAID0 by removing the old installation and turned to the raid no drives. Then, I created a RAID0 again... I guess you know where this is going...

He said now insert the boot cd... Now, it of not anything but let me in Control Panel and change the startup preferences...

I have no recovery disk or I can't find what happened if I have... with backup (for USB) external drives will not work... I kind of looking online hp without result and I saw some online, but that seems pretty shady, especially with the case of the OS...

I will not buy another office, if I can help it, but I need to know if there is something I can do?

Thank you

.

Hello:

Yes, I've been able to do it once, but you also need an operating system installation disk. You need a USB FDD + OS installation disc and the correct drivers of course on the floppy drive.

You can use a recovery for this drive yet. It must be an OS installation disc.

Yes have ultimate could be a problem. If you enter your model number on this site of surgeons in the computer, you get a lot of options showing the recovery disks for different versions of the OS, but only had listed actually drives.

You need to call HP and ask or email these surgeons computer guys and see if they have the recovery disc for ultimate games.

Paul

used sytem repair from the installation disc difficult or too complicated?

do you know if the repair system hard to use from reinstalling vista irunning disk? without any reason after windows drivres dell download does not start, it is just there to take all this time and if I'm lucky it will start, I used the configuration of the system, and that did not help. I know, it seems that he is sssoooo nearly all set to start at the same time, but in the system and the process where it lists everything that I don't know what is what, so I can't stop the useless stuff to start, I thing I have too many things that either doesn't work - I don't have not even half uninstalled or put in the easy computer were and if it's the dell drivers , screwing, then why vista does not work?

Dell has a touch screen F12 on boot options, but vista says to put in disk, press on restart and then repair, but what happens if I can't do it at the start or the dvd - rom does not start when I reboot?

and if it doesn't it's really complicated? I ran disk cleanup and repair. I ran to check memory, I had 140 GB free out of 240 GB, I ran two restorations system back to dates before I installed the drivers from dell, everything worked fine until last night, now dell takes to always to get to the windows startup takes part and windows to start even in safe mode.

I ran all the controls sytem dell pc and everything passes .so should I put the disc and hit restart? and should I first go to where he gives the choice to load some stuff or normally loads at startup, and which one should I use all or just selective to go until I reboot. Thanks for any help you can offer, because it runs now I don't even want to turn it off.

Which

Hello

You receive an error message?

Method 1:
You must restart your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

If you have a Windows installation disc, you can follow the procedure:

a. Insert the installation disc.

b. restart your computer.

c. click on the Start button, click the arrow next to the button lock and then click on restart.

d. If you are prompted, press any key to start Windows from the installation disc.

Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

e. Select your language settings and then click Next.

f. click on repair your computer.

g. Select the operating system you want to repair, and then click Next.

h. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

WARNING OF THE BIOS:
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Method 2:
You can see startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

Method 3:
You can check the event viewer for related event logs.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

You can also see the links provided to learn more:
http://support.Microsoft.com/mats/slow_windows_performance

http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

Can I get another copy of the installation discs to use with my product key?

I bought a copy of XP Media Center in 2008. Recently, I tried to install it for the first time and received a message that windows needs to run the files are missing. He installed windows and ran for a few weeks now to start it flashes a blue screen for 1 second and then tries to restart again. Can I get another copy of the installation discs to use with my product key?

Unfortunately, Windows XP Media Center has been removed and the installation of replacement discs are no longer available.

most have the product key, or the installation disc. Can anyone help?

I have recently upgraded to windows 10 and hope to do a clean install, but I had not given this option. On the Microsoft site, I've been advised to go back to my previous version of Windows, 7 and then repeat the upgrade. I did and when I tried to upgrade, he did a validation test to see if my copy of windows is genuine and she failed the test. He had the validation test before that I first have to upgrade to Windows 10, where it is spent. I have more the product key, or the installation disc. Can anyone help?

Kind regards

Kevin

OT:

KFDFD

Get Windows 10 App indicates my license is not enabled:

Yet once, make sure that you run a copy genuine and activated Windows 7 or Windows 8/8.1.

Click Start, right-click computer law (Windows 8 or later version - press the Windows key + X > click System)

Click on Properties

Scroll to the bottom for Windows activation.

If your activation status indicates that it is not enabled, then you need to do.

Your activation status should look like this:

Try the following:

Click Start, right click on computer

Click on properties

Scroll down to the Windows Activation

Click on the link 'change product key '.

Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

COA certificate of authenticity:

http://www.Microsoft.com/howtotell/content.aspx?PG=COA

??

What is the certificate of authenticity for Windows?

http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

If Windows 7 is a retail license, try the phone activation:

How to activate Windows 7 manually (activate by phone)

1) click Start and in the search for box type: slui.exe 4

(2) press the ENTER"" key.

(3) select your "country" in the list.

(4) choose the option "activate phone".

(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

(6) explain your problem clearly to the support person.

http://support.Microsoft.com/kb/950929/en-us

Also try to run the fix it and then restart your computer:

http://support.Microsoft.com/kb/2230957/

If you are able to resolve activation problems, your installation before performing the upgrade again:

http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

Also check:
Please be aware, even if you do not get the Windows 10 app, you can always download Windows 10 as one. ISO file, create a bootable copy and update your system.
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
See the instructions: How to download official Windows 10 ISO files

How do I install the drivers during the installation of windows 7

I did an install home premium windows 7 dvd by burning a file .iso I downloaded on a dvd and I am facing problems installing drivers. I extracted the drivers on an external hard drive and installing windows 7 they ask me about the drivers before installing windows.
I have all the drivers in the external hard drive but I tried several times to install them using the button browse and locate the folder that contains every driver and install it alone, but his does not work. So is there a better way to install the drivers?
Thanks in advance

Hello

During the clean install of Windows 7, users are generally required to install a few drivers for the internal hard drive. These drivers must be written to a DVD disc / USB key and installed when prompted.

In this case, I believe, is that you are trying to install the wrong drivers. The installation requires the internal hard disk drivers. This driver will depend on the configuration of the internal hard drive (RAID, SCSI, etc.).

Another possibility could be that other equipment are not properly recognized by Windows 7 installation. You try to install Windows 7 and burn the ISO on a USB bootable and start the computer to the top of this USB key. Here's how you can do:

http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

If, during this installation, you get an error saying that a required CD/DVD or USB driver is missing on the computer, you might see the message marked as answer in this thread.

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

Please get back to us with the State of the question.

HP 2000: Need drivers (or the installation disc) for HP 2000

Similar Questions

Perform a new installation of Windows 7

Perform an upgrade of Windows 7 installation or an earlier version

Maybe you are looking for