HP 2050 j510 series change the print quality options all greyed out help? Project custom quality etc.

Similar Questions

• How can I change the print quality of 72 dpi and 300 dpi?

  When I try to print the image from my library on my printer fate at very low resolution. There is nothing wong with the printer - if I use another program to print the results are perfect. How can I change the resolution settings in Windows 7?

  Hello Robin,.

  Although some applications allow you to change the settings for printing (as parameters of the screen), print quality is generally a function of the properties of the printer. Go to the Control Panel, select devices and printers, then select the printer in question. Right-click on the printer, select Properties, and then look for quality printing or the DPI settings page to change the resolution of your default printer. Once the resolution was increased, Windows will display the new default setting.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• HP Officejet 4500 crashes when you click Properties to change the print quality

  There is no answer to a minute when I want to change my print job properties after clicking on the properties button. I haven't changed anything concerned with the printer, what the problem and how can I solve it?

  beckybeib,

  Also, make sure that you do NOT connect the USB cable until the software tells you to connect, when you reinstall the software.

• DeskJet 2050 j510 series do not print prints 4 x 6 sized 4 x 6

  all the prints are 3.75 x 5.3 from windows photo gallery and the library of portable windows of hp and acer netbook. not real photos of 4 x 6 print.

  Hello

  The printer does NOT support printing without margins so it cannot print full sheets 4 x 6

  http://www.dpreview.com/products/HP/printers/hp_dj2050j510/specifications

  Kind regards.

• successful installation of the United Nations to the pilot for All_in_one Deskjet 2050 j510 series

  «While I want to install the software (downloaded) driver for my printer "All_in_one Desskjet 2050 j510 series, I came across a window asking " printer information'.»» In this window, there is a field "confirm your location ', there I could not find any provision to select my country (India) & below that there is a field asking to enter the " POSTCODE:... ' "" ", I don't know what to enter... Please help me continue my steps of installation...

  Hi Aswathi_C,

  Please check your message box located at the top right of the window directly to the right of the where it says "Log Out".

• Impossible to uninstall HP Deskjet 2050, error: C:\Program HP HP Deskjet 2050 J510 series\bin\HPStatusBL.dll

  Original title: when I uninstall the driver and software for HP Deskjet 2050 I get an error message

  When I uninstall the driver and software for HP Deskjet 2050, I get an error message when I start my computer after starting the error message is:

  RunDLL

  There was a problem starting C:\Program HP HP Deskjet 2050 J510 series\bin\HPStatusBL.dll

  The specified module could not be found.

  My computer is:

  Edition of Windows: Windows 7 Professional 64-bit with Service Pack 1

  Brand: Acer

  Model: TravelMate P645-MG

  Intel Core i5-4200U CPU @ 1.60 GHz 2.30 GHz processor

  RAM: 4.00 GB (3.89 GB usable)

  Hello Nathaniel,

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to inform you that HPStatusBL.dll is a type of DLL file associated with HP Digital Imaging developed by Print Driver status logic for the Windows operating system.

  This error could be related to issues in the Windows registry. Broken DLL file references can prevent your DLL to register correctly, file giving you a HPStatusBL.dll error or if the product is not uninstalled successfully.

  You can try these methods below and check that helps:

  Method 1: Uninstall programs and features.

  1. By clicking on the Start button, open programs and features .
  2. Click Control Panel in the right-hand menu.
  3. Click programs.
  4. Click programs and features.
  5. Locate the program HPStatusBL.dll - related (for example. HP Digital Imaging) under the name column.
  6. Click on the entry for HP Digital Imaging.
  7. Click the Uninstall button in the Ribbon to the top menu.

  Follow the on-screen instructions to finish uninstalling your program associated with HPStatusBL.dll.

  Method 2: Remove printers from Device Manager.

  Remove printers and uninstall Windows print drivers using printers and Windows devices.
  1. If your printer connects to the computer with a USB cable, disconnect the cable from the printer.
  2. Turn the printer off and then on again once and make sure it is in a ready state.
  3. Search for Windows devices and then click on devices and printers in the list of results.
  4. Right click on the printer icon () for your printer, then click on remove device. Follow the on-screen instructions to complete the process.
  5. If multiple icons are available for the printer, delete them all.

  You can also check:

  http://support.HP.com/us-en/document/c02259020

  If the problem persists, follow method 3.

  Method 3:

  Follow the steps in the given link:

  http://h30434.www3.HP.com/T5/other-printing-questions/need-help-to-completely-uninstall-HP-drivers-amp-software-FM/TD-p/498183

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• How can I change the print in grayscale settings?

  How can I change the printer (3050 J611) of colour printing for printing in grayscale print fast by default?

  soaprhm wrote:

  How can I change the printer (3050 J611) of colour printing for printing in grayscale print fast by default?

  What operating system?  For Windows 7, you would go to start, devices and printers, right click on the HP Deskjet 3050, printing preferences, select the paper/quality tab and some Plain paper media quick project, apply, then click on the Advanced tab and under the characteristics of the printer, select printing in levels of gray and black ink only, apply, OK.

  

• Photosmart 6520: 6520 Photosmart printer stopped printing black after changing the print cartridge

  There was a similar position two years ago. After changing the cartiridge (564XL) black printing, the printer will not copy documents. He behaves as if I placed a blank sheet of paper on the glass. I can scan the document and print the .jpeg, but not the document. The print quality of everything else is mediocre - very light on blacks, even though the colors are fine. I ran through all the diagnostic tests and he told me that the printer is fine, although the black box on the diagnostic page is empty. The difference between my printer and the one in the previous post, it's mine is 18 months and longer warranty. It has been little used. In the previous post, none of the solutions have been proposed, but apparently HP has replaced the printer. Any suggestions, or is this device intended for scrap?

  Try youtube videos here.

  https://www.YouTube.com/results?search_query=Photosmart+6520+print+head

  Looking to learn more.  If no joy, your printer is toast.

• The print quality is very poor.

  Deskjet2050 j510

  Windows7

  The print quality is poor. I want to try to clean and open Help.It has started saying "open the HP software. How do I do that?

  If you have installed the HP software during the installation of the printer, you should be able to open it like thie:

  Click on the Windows icon ( ), click all programs , click HP , click the folder for your HP product and then click the icon for your HP product ( ).

  This is a doc support on fixing problems print quality on your printer: http://support.hp.com/us-en/document/c02061863

• I am not able to change the video quality for you tube. There are only two options 360 and Auto. Please help me.

  Hi I am experiencing strange problem for 15 to 20 days and I am not able to change the video quality for you tube. There are only two options 360 and Auto. Help me please if you can because I have a slow internet connection and I want to play video at 240, as it was before. Thanks in advance for your help.

  Could check you whether YouTube is to serve its HTML5 player or the player based on Flash? If you right click on the drive, short a context menu should appear. If the full Firefox context menu is displayed, press and release the ALT key to erase that. The last line of the menu short usually indicates which player he is.

  I'll assume HTML5 because...

  On Windows 7, Firefox should show a wide range of formats in the HTML5 player. However, if some of the features of media are disabled, preventing video MP4 decoding, then YouTube offers only 360 p (with WebM coding).

  If you have intentionally disabled Media Foundation and/or DirectShow in topic: config, then perhaps you would prefer to use the YouTube Flash Player? There are a few Add-ons that can force YouTube to serve you a Flash drive. Either of them will do, you don't need both:

  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-video-player/
  • https://addons.Mozilla.org/firefox/addon/YouTube-Flash-Player/

• Impossible to change the video quality YouTube app when using cellular data?

  Basically, when I'm on my data (AT & T) and decided to watch a video automatically plays it at 1080 but it burns my fast data. I tried to change through the video, these three points there and says unavailable. I go into settings YouTube app and I don't have any options to change the right quality quality upload. But I noticed on Android users that they have options to change the quality. I'm looking forward on Google but I don't get the option in the settings, I get even the left menu. Yes my YouTube app updated.

  http://www.howtoisolve.com/how-to-set-video-quality-for-all-video-in-YouTube-IPH one.

  Yes, the iOS YouTube app don't gives you the option to change the video quality over a cellular network. Try to open YouTube in Safari browser

• Is it possible to change the printer function to accommodate the thicker paper

  Need to print on thicker card, but the paper is a little too think to roll smoothly through the printer.

  Anyone know if there is a way to change the printing options to solve this problem?

  This would be a limitation of the printer, so I suggest to contact the printer manufacturer for advice. My suspicion is that it will take another printer.

  -steve

• Can I hide or change the print window not pop up when printing?

  Original title: hide or print shown window?

  Can I hide or change the print window not pop up when printing? I want to still print but just to hide so it does not appear.
  Is it still possible?
  Thanks for all help

  Hi rustylzard,

  It is not possible to hide or change the print window when you try to print something.

  Hope the helps of information.

• print size too large after changing the print cartridge

  Sounds like an easy fix should be up there, but I'm not super computer savvy... after that we changed the print cartridge for the first time with this printer (and who knows what may happen after when my husband tried to fix it), the font of printing is too large AND prints a blank page of paper before the actual page prints with a font that is too large to fit properly on paper 8.5 x 11 inches. Normally, there are all the parameters that must be set after simply change an ink cartridge? Help!

  Hi Wendy,.

  You can also check: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=au&lang=en&product=4089468&

  I hope this helps.

• "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

  I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

  Original title:

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

  Excerpt:
  Can I run a 32-bit program on a 64-bit computer?

  Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

  Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

  .
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.