HP 21-ho39: hp 21-ho39 and external monitor

I have an external screen I want to connect my all-in-one. But it only allows me to connect a wireless monitor. My computer does not see my external monitor.

So that the wording backwards, it might be similar to what I showed.  In fact you have a supporting Windows 8.1, just like the one I linked?  Also, have you installed the software for this?

Tags: HP Desktops

Similar Questions

  • Connection ethernet and external monitor

    Is it possible to connect an ethernet cable and a VGA adapter to a MAC AIR at the same time?  I use my crush on internet in my school and I would like to use an external monitor at the same time.

    There are two options: a dear TB hub that allows you to add additional ports or a USB Ethernet adapter. The USB adapter will be slower, but depending on the speed of your school's network you may not notice a difference.

  • MacBook 12 "and external monitors - experiences

    That I have not found much info on using a MacBook 12 "with external monitors (but have found problems), I thought I would post my experiences here for the benefit of other researchers:

    MacBook 12 "with Dell u3415w (3440 x 1440) via a USB - C adapter Digital AV Multiport (HDMI):

    VIDEO: Experienced random black screens on the external monitor. After update to El Capitan 10.11.4 version which included an update of the firmware of the adapter, the problem become constant, with the external screen crashing to black seconds nonstop. Switching the HDMI on the MHL port on the monitor completely solved this problem.

    VIDEO: I'm only able to get a resolution of 2560 x 1080 scaling to fill the screen, which is a little fuzzy but fine for office tasks - selection reduced 3440 x 1440 or "best resolution for this monitor" translates into a look, windowed 16:9, with black bars on the right and left. I have not yet found solution to reach ultra-wide 21:9 angle at the native resolution (but would appreciate a).

    VIDEO: Macbook 12 discs easily display 3440 x 1440 for tasks of office such as word processing and surfing. Video full HD YouTube is generally good, but gets now and then a little agitated.

    AUDIO: Holding Option and clicking on the speaker icon in the menu bar show selectable option for the audio output to the device (monitor). On this screen, it seems to be a problem of reception of the signal of the Macbook when another device is connected to another port. In my case, a PC connected to the DisplayPort would be "laundered" the audio signal of Mac but ONLY if the PC has been out audio through external speakers, not the monitor (a lot of trial and error to discover this. When the audio PC sent ONLY to the screen, the monitor then accept the audio signal of the Mac, too. But have an external speaker connected via a cable audio 3.5 mm to the pc mobo (taken minijack) would somehow replace the TWO PC and Mac audio signal to the monitor. Something to do through the DP connection maybe)

    with ASUS PB27Q (2560 x 1440) via an adapter, no problem.

    with ASUS PA328Q more ASUS PB287Q (3840 x 2160 or '4 K') using the same adapter. Cursor extremely lag/Office up to that you enable DP (Displayport) 1.2 through settings on the screen of the monitors. This allows the Macbook to drive a monitor 4K at 30 Hz, which is always a little laggy, but realistic enough to be productive for word processing, surfing, etc. Would not recommend a 4K monitor for Macbook 12 for a really "nice" experience until / unless that 60 Hz is an option.

    Hope someone finds this is useful.

    Mac Book 12 with external monitor Acer H277 Hu with Usb c

    random black screens

  • Tecra A10 - BSOD with Port Replicator Port and external monitor

    Hello

    I have a Tecra A10 PTSB0A 05C023 with XP SP3 on an Express Port Replicator, running to an external monitor (1280 x 1024) on VGA. Works fine for a while then seems BSOD spontaneously when not in service - possibly when screensaver or powersaver comes into play.

    BSOD is a STOP 0x0000007E in igxpmp32.sys

    I downloaded and installed the latest video drivers intel from the Web from Toshiba - 6.14.10.4953 site

    Any help or advice by eliminating the BSOD would be greatly appreciated.

    Kind regards

    Rhys.

    Hi mate,

    I asked Google to igxpmp32.sys and this file belongs to the Intel display driver. In your case, I recommend the page Intel searching for the latest display drivers.
    [www.intel.com]

    Also have a look on the Toshiba site for a BIOS update, or you have already installed the latest version of the BIOS?

    In addition, it would be interesting to know what Port Replicator you use exactly. Can you post the model number?

  • Portege M800 and external monitor Dynadock question

    I have a M800 connected to a U Dynadock docking station.
    I have problems when I try and put my external monitor as the primary device and have the cell phone as the extension to monitor.

    I am running Windows XP.

    Are the only options it will allow: Clone, Extended (laptop is main and external is the extended option)

    If I use the WIndows graphic option it does not put the external monitor as the main display (I check this option and click on apply and it remains unchecked)

    If someone could help that would be great.
    Otherwise, I would recommend is not to use the dynadock

    Sorry mate but I still don t understand what you are talking about what problem do you have?

    Is the Dynadock video drivers give you the ability to view a total of three screens.
    -L' screen of the laptop.
    -external monitor connected to the video port on the laptop (if available)
    -ewxternal monitor connected to the Dynadock

    In addition, you can use mirror Mode and Extended Mode.

    Mirror Mode creates an identical view between your computer screen and the external monitor
    Extended mode extended Mode lets you split your display on multiple monitors.

    These are the features that you can use with Dynadock

  • Satellite U300-113 and external monitor use

    I have, what I thought until very recently, a very simple need: I would like to connect an external monitor on my laptop, but on the continuation of the investigation things seem much more complicated about resolutions natives and elongation.
    Is there anyone who could recommend an acceptable quality monitor that is proven to work?

    I think that you should check the resolutions supported for external monitors and I think you can find answer in user manual s on page 119. To have a perfect image on external screen, you should buy external display with a native resolution listed in the table of user s manuals.

    Also talk to your local dealer. Perhaps you can test the functionality in the store before buy you.

  • Tecra A2: Question about DVI and external monitor

    Hello
    I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
    Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

    Thank you
    Ralph Menon

    Hello Ralph

    Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

    The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

    Good bye

  • EliteBook 8460p and external monitor/projector does not work

    We have several 8460 with the same question.

    They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

    When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

    I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

    Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

    I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

    There are the HP Elitebook 8460p with AMD graphics card in the computer.

    There is no any other indication that something isn't going to the newspaper or whatever it is.

    Any suggestion of what may be the cause of this is useful.

    Hello and thanks for the reply.

    The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

    Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

    Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

  • Using the function tablet and external monitor at the same time

    Hello

    I was hoping with the docking station and the external monitor, I can work as with an ordinary computer and at the same time to use the computer screen Tablet laptop to take notes with Journal (extended desktop display).

    Unfortunately, when I touch the screen with the stylus, it is still planned for the external monitor - no matter what I set as main display it seems just really stupid.

    Does anyone have an idea how to prevent this?

    divB

    I've updated to the latest official drivers from the Wacom homepage (not Lenovo-, they are old!) and it seems to work!

    I hope he'll stay until now.

  • Problems with my slower... graphic AGA and external monitor does not display

    First of all, let me say that I am not computer savy.  I just bought an Alienware 17 June 1.  Got my AGA and installed a Geoforce GTX 980 inside graphics card.  First I tried as far as I know (which is not yet much about computers) to connect an external monitor to the AGM.  For some reason that the monitor does not display anything and my laptop States there is not all the other monitors it can detect.  Now, the other problem I have is that I run games using my AGA and when its connected I can really see my games download restless and slower.  I thought that the whole purpose of the AGM was pushed my graphics and do amazing things... not very frustrating.  Any suggestions on what I might hurt?

    Try the following:

    Disconnect the graph.

    Uninstall the video card drivers.

    Install the following driver (this version is not in the official Dell support website again, however, it has been tested by our engineers)

    Restart the system and connect the graphic amplifier and test it.

    Please let me know if this helps you solve the problem.

  • HP ENVY 5830 HDMI / DVI and external monitor not detected

    I have a HP Envy 15 with the ATI 5830.  I want to connect an external monitor.  The outside is a Samsung SyncMaster P2770HD and has a DVI (also has HDMI, but poor quality when used from a PC). My laptop has only HDMI.  When I use a DVI - D HDMI converter / my laptop does not detect that there is an external monitor.  I've lived all my settings and updated the Bios and video drivers.  I'm missing something. Appreciate any help.

    Hmmm... Looks as HDMI / DVI - D adapter for me, like the HDMI port problem works well insulated... I don't remember any problems, I've heard of HDMI to DVI - D and untimely on Envy 15...

  • Reset the workspace when switching between laptop and external monitor

    Is there a way to have my work space reset itself (or better yet change between two workspaces) when I pass between my laptop and my external monitor to my office. Adobe likes to crush my workspace in a sea of useless, mutilated pallets when I leave my office. There at least had the kindness to put it when I get back.

    I realize I can manually reset and I even put in place a combination of keys, but I don't see why he can't do it on its own. Or better yet, stop blend it upward in the first place.

    Unfortunately, I think it's an OS and PS reacts only to have to resize it to another monitor.

  • CS5.5 and external monitoring - is there something new?

    System requirements says:
    "Capture port IEEE 1394 compatible OHCI for DV and HDV,
    "export to tape, and transmit to DV device.
    http://www.Adobe.com/products/premiere/tech-specs.html

    Does "transmit to DV device" hardware output MPE average to a DV device?

    Or, this post is always the 'official' for external monitoring solution from Adobe
    without the help of third party material and sequence presets?
    http://forums.Adobe.com/thread/744683

    DV out is still not compatible with the GPU acceleration.

  • Question on the docking station and external monitor support

    Hello

    Can you please let me know of the docking station (name, model number, etc.) I need to connect to two external monitors to my hp laptop 8560w (not the laptop screen).

    Thanks in advance

    rogers7942

    This allows 2 additional monitors in addition to the laptop screen:

    http://h30094.www3.HP.com/product/SKU/10432932

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Satellite A100-646 and external monitor shows black screen

    Hi all

    I have a similar problem with A100-646 (purchased in Italy). Computer laptop LCD and monitor external display screen black but without another problem at the start of the system. When the laptop is not used for a long time (half a year) it works for a week with no problems.

    Unfortunately, there is no adequate service in a place where I live. Perhaps, there is a power problem.

    Is there another idea? Does anyone have a service manual? ([email protected])

    Service manuals are available only for the technicians of the ASP.
    Unfortunately, it looks like a hardware problem, and therefore, you should get in contact with a technician for laptop to check defective parts!

Maybe you are looking for