HP 250 G2: Battery does not charge, does not start on CA only

Similar Questions

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• MY dell inspiration does not start, it will only in Safe Mode

  MY dell inspiration does not start in normal mode, in safe mode. I have windows vista. any help please. Thanks in advance

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Computer does not start properly, shows only a black screen

  When I turn on my computer, my home page is not upward.  She's just standing on a black page.  Someone can help me.  It also only allows me to reset or clean.

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Tecra A11-128 does not start - black monitor, only the fan is on

  My laptop starts to boot, a few seconds later, the fan runs all the time and at full power. Here the detailed steps:
  -Push the Start button (battery led is green)
  -the hhd led is green for a short time, then off
  -l' screen is black all the time
  -After a few seconds, the fan starts at full power
  -That deer situation change either, I must break with 5s on the Start button

  I tried several keys (Fn + F2, ESC, F5) while starting up, as an external monitor. Nothing has changed.

  Who has an idea? Thank you very much for your help!

  Hello

  If the start of the BIOS (or Toshiba) screen does not appear, it means that a serious motherboard hardware problem can cause this RAM modules or malfunctioning CPU would be possible
  Recommends checking the memory RAM and CPU modules
  The RAM modules could be replaced easily but it of difficult to replace the CPU and test it. Therefore, it would be a job for a technicians for laptop

• Satellite M40X-119 does not start - 4 beeps only

  Hello..

  I have Satellite M40X-119
  When I press the power button, the blue light comes on and the fan starts and then only 4 beeps
  (Beep - beep - beep - beep) intreval approximately 1 seconds. and then nothing happens!

  I replaced the RAM with a new one... but still the same

  any advise?

  Hello!

  As far as I know the Satellite M40X has a Phoenix BIOS.

  Phoenix BIOS, there is no code 1-1-1-1 (beep-beep-beep-beep).
  I think it is 1-1-2-1 or something else.
  Here is a list of the different beep codes:
  http://bioscentral.com/beepcodes/phoenixbeep.htm

  If you replaced the RAM, I think that there is something wrong with the CPU or the motherboard.

  Good bye

• ThinkPad Yoga S1 does not start - fan runs only

  Hi guys

  I have a Lenovo ThinkPad Yoga S1 (Type 20CD-00ALMZ) which was working fine for the last 10 months, but now refuses to start. I use it everyday at work on the docking of desktop with screen and keyboard, mouse.

  The last three days, I couldn't start the button on the docking station, by the hard button on himself.

  Today, it was totally fine, even on the hard button that it no longer starts.

  The behavior is fallowing:

  -push the power button

  -the 'I' light on the logo comes up and the fan turns up about 3 seconds

  -l' screen stays off

  -After that, it turns off completely for about 1 second and leaves with the same behavior

  -This boot loop continues until I close it and it stops from new

  Anyone who has any idea about this?

  Thank you and best regards

  
  

• Video will not start RAM, Audio-only preview play

  Processor: 3.4 GHz Intel Core i7

  Graphics card: NVIDIA GeForce GTX 680MX 2048 MB

  16 GB of Ram

  Mac OSX Yosemite 10.10

  After Effects Version: CS6 10.0.4.2

  OK, so let's say you make a simple animation, like a circle moving from the left side of the screen in the Center with an audio track (or not at all). Hit the RAM Preview, it will make the animation. However, reading, audio is played from the beginning, and then the animation takes about 3 seconds, where the circle has already entered into the composition. Now, if a loop is executed after playing the full preview, then only I will see the circle enter the screen from left to right.

  Also, if I check the box of full-screen, I'll see it animate from the beginning. Box info to a point says "Existing keyframes lock" and then, after 3 seconds, said 'Play on 3 seconds'. It doesn't mean that it is playing in real time, etc..

  So during the first 3 seconds, I don't see any animation, and then he comes back after that point. I dumped cache and everything, restarted my computer and reset my preferences. Someone has an idea of what's going on?

  See the problems here:

  After Effects Mac OSX v10.10 (Yosemite)

• Satellite L655-13V - battery does not charge

  I have laptop Satellite L655-13V and the battery does not charge while I plugged the AC/DC adapter.
  and give me this status: "plugged in, not charging."
  And when I connect the battery only work on computer, and when I connect the AC/DC adapter only without battery the computer works also.

  But when I connect the battery and plugged to the AC/DC battery adapter not charging and give me this status: "plugged in, does not support".

  Please, help me to overcome this problem.

  Hello

  Leave the AC adapter plugged into the laptop for a longer period of time.
  In many cases, the battery may not start to demand immediately, as his deeply discharged.
  In this case the adapter must be connected to the laptop for a long period of precharge the battery, then the battery should start loading as usual.

• First HP: HP first does not start after upgrading firmware 20160414

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  I am able to download the firmware, but after that it just does not start.

  I have reinstalled the kit connection several times.

  I used the option "use the new method of update" in the connectivity kit. But it won't help. I tried to download older versions of firmware.

  I tried the factory reset options: A, F, key simmultaneously O and then with the reset on the back

  I tried the Apps, Esc, now.

  It just does not start.

  Any suggestions anyone?

  With sincere friendships.

  Sigurd

  Ziggy76 wrote:
  

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  ...................
  

  It just does not start.

  Any suggestions anyone?

  The suspect first IMO is win10. You are a brave man to make an update based on win10. Try to do this on a computer with 7 or 8.

  Some on this forum may say they made a correct update of the firmware with 10 victory.

  However, to win 10 is known to his problems with the drivers and the software which is not original ms or not correctly connected.

• Satellite A300D (PSAKCE) - BIOS is damaged and does not start

  I formatted computer after when I put update computer BIOS is frozen and it does not work now. File is true where I download from Toshiba Web site.
  I searched Web of Toshiba sites there was not any producere for recovery of the BIOS for the damged BIOS file. Many start-up models with some keys to the BIOS update but mine is not starting any screen only empty key.

  -Can I do it myself? Is there a procedure for Satellite A300D-17F (psakce)? I don't want to wait for the rear service it 6 months before I bought it.
  -If I send to the service, it is under warranty? I don't know any time service can be a problem. They say problem user but I reformatted the PC after I started the update program and they can not understant that sometimes.

  Thank you...

  Hello!

  In this case, you need help from the ASP. You can do anything and it is possible that the ASP BIOS reset.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Windows does not start successfully - only in safe mode.

  I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

  Required reading:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284

• Equium P200-139 - will not start

  Got a P200 does not start.

  Blue light turns on and sounds like its gunna start up but the screen remains black and the often turns after a few minutes. So basically I can't even in the computer to try to fix the problem

  Grant... .do ideas?

  Hey,.

  If you think that the boots of laptop but you don t see something, I would like to connect an external monitor in your case. So, you can check if the notebook starts really or not and if so, you can see what is the reason.

  If the external monitor is also black I would try this:
  -Remove the battery and the AC adapter
  -Wait at least an hour
  -Reconnect AC/DC adapter and install the battery
  -Make sure the battery is fully charged
  -Try to start the laptop

• Satellite A65-S1062 battery does not charge

  Hi all

  I bought TOSHIBA Satellite A65-S1062 a few days, but it was not new.
  And now I have a problem with loading the battery = (first of all, I reinstalled the operating system (windows xp sp2) and tried to install all the drivers, but I had problems with 'save energy'.

  Initially the indicator in the Panel showed 6% of load and wile installing the programs that I checked the indicator, is perhaps half an hour, he showed at 7% and everything would be ok but within an hour he showed me the 0%, and it does not change for 2 days already.

  I checked my computer with "everest" and he showed the wear level - 25%, but what is interesting, it shows the different load (150 mW to 20000 mW) capacity rate appears as 150mWh (0%).

  See photo here [http://i024.radikal.ru/1005/71/195d9b23719f.jpg]

  PS: I'm sorry for my English, but I'm originally from the Ukraine and cannot speak fluently.

  Hello

  In my opinion the battery is malfunctioning because it s old.

  My 6-year old s battery no longer works it shows what he s is fully charged, but the laptop can run only 1 min using the battery power
  After that the battery is empty.

  It s nothing unusual! Sooner or later each battery would die!
  I think that you need to replace the battery, I think it should help

  Welcome them