HP 250 G2 KEYBOARD FN KEYS NOT WORKING NOT

Similar Questions

• HP2000 2120TU: keyboard some keys not working do not. HP2000-2120TU

  Hi guys,.

  I need help because my Lapi (HP2000-2120TU) keyboard does not work properly.

  Sometimes all the keys does not work as some time (delete, space, zxcvbnm.,).

  Due to the deletion of the key more than my document basket go when I want to open something...
  
  I made a solution (in the Manager device just uninstall keyboard and restart lapi worked all the keys that time but to delete the key did not work correctly) after that I was facing same I reset all lapi but still the same...

  some time my mouse pointer stuck in the middle of the screen that this is happening for a few weeks 1 after having installed the w10.

  Please update me with the right solution.

  Hello @KKupadhayay,

  Welcome to the Forums of HP Support! I see that you are facing problems of keyboard with your HP 2000-2120TU.

  I would like you to start troubleshooting here: laptop keyboard troubleshooting (Windows, 10, 8)

  Does that help? If you have followed all THE steps without success, please call our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• V5 - 552P keyboard some keys not working not

  running windows 8.1. less than a month.

  the keys c, d, e, 3, 4 will not work. last week, it was those and a few more. any suggestions?

  Eric

  Hi all!

  As you have two new PC with keyboard problems, I recommend you contact Acer support to repair.

• Pavilion 15-b142dx keyboard some keys not working not

  A friend gave me their 15-b142dx sleekbook Pavilion, apparently AFTER they spill some type of liquid inside. I was able to start the computer, however, there is still a problem with the keyboard.  When the keyboard is installed in the laptop, several of the keys do not work. However, when I go out (and hang with some plastics) it works fine.  I disconnected the ribbon cable and took little alcohol to clean the area. I was also able to run HP diagnostics on the startup, short and long versions and they come back ok.  In addition, I connected an external keyboard and it worked fine. I searched the forum for this type of question and do not see. If someone has had this problem, or I'm looking to replace the keyboard?

  I am currently running windows 8.1. I don't get any error messages, but I noticed that HP does not have a litmus test of keyboard in his diagnoses.

  Hi there @MrKen99

  Welcome to the Forums of HP Support!

  I understand that some of your keys do not work, after that little liquid has decided to make an unwanted visit to the Board of Directors. I'm happy to help you with this.

  In my sordid past that I've seen some really messed up keyboards, due to things like, coffee, cola, water, whatever. My most memorable was someone who gave me a computer that has been used in a kitchen and was close to a deep Fryer, and the keyboard was not only covered with oil and fat, but a generation of fuzzy dust throughout the keyboard upwards. In this case, I have recommended a replacement as the cost to clean it was more expensive than a new one.

  In any case, it sounds as if you have already tried to clean it up, but if you do not jump off the keys to delinquency / inactive, the contacts could be "sticky". Make a note of the keys that are the problem and treat them individually. This document shows how to remove and replace the keys on a standard notebook keyboard.

  Computer keyboard laptop troubleshooting (Windows 8)

  If you don't have any success doing this then I would look at the keyboard, or by using an external keyboard replacement. If you choose a replacement you can check the service manual for it, and it will give a list the items supported.

  HP Pavilion TouchSmart Sleekbook 15 and HP Pavilion 15 Sleekbook Maintenance and Service Guide

• Laptop keyboard - some keys not working not

  Hello.

  I have an acer aspire 3750z (a few years) works on Windows 7. Unfortunately, some of the keys on the keyboard do not work and - oddly enough - when I connected an external keyboard in the same ones did not either use. The others are fine and I can use the keyboard to the screen when I load it up.

  I've got either no update of windows due and none of acer. No other problem as far as I know and otherwise good performance.

  Hello

  1. what happens when you start the computer in safe mode?

  2. are you aware of changes to the computer before the show?

  You can check if the device is recognized in Device Manager.

  To check:

  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.

  You can also check in The DirectX tool of diagnosis and see if the device works properly

  1. go to start > run
  2. type dxdiag in the race field.
  3. navigate to the tab entry.

  Run the troubleshooter of material and check.

  Troubleshooting of hardware and devices

  Run the hardware and devices Troubleshooter and check the results.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  
  I also suggest you to update the chipset to most drivers late before you install the bluetooth driver.

  You can also look for more updates through Windows updates and try to install.

  Hope this information helps. Response with status so that we can help you.

  Hope this information helps. Response with status so that we can help you.

• keyboard some keys not responding do not

  some buttons will not respond

  Toshiba p200d/p205d
  c n h k x
  no error msg
  w / all the apps
  No changes prior to the issuance

  I contacted toshiba support. has been advised to have cleaned keyboard. went to office depot. They cleaned keyboard but said looked clean. you uninstall keyboard anf restarted it. still a problem. purchase external keyboard working. still a problem with the laptop keyboard.

  Hi candacegerganess,

  Thanks for posting your query in the Microsoft Community. Provide the following information for a better understanding of the issue:

  ·         What is the brand and model of the keyboard?

  ·         The keys on which you speak?

  ·         You get the error message?

  ·         The problem occurs with all applications?

  ·         Did you do changes on the computer before the show?

  Answer with the information required to help more.

  Refer to this article: Suggestions for a question on help forums

• HP 250 G3: The brightness keys not setting

  Since I bought my new laptop 2 weeks ago, that I was not able to adjust the brightness of the screen of my laptop, it is at its maximum and the keys do not adjust it that I even tried to make adjustments but still it does not work. Please help the brightness affects my eyes

  Hey Tang ,

  Sometimes the update of Win10 have a strange habit of turn off monitor, so present the current number.

  Please, press the Win + X keys, or simply right click on the Start button.

  Choose "device manager".

  Take a look under "monitor." In similar cases, generic PnP monitor is disabled (down arrow).

  Just do a right click and choose 'enable '.

  Otherwise, it could be the problem with the graphics driver. Here should be HP for your PC support page:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6732463 & swLangOid = 8 & swEnvOid = 4192

  Download and run the latest version of the Nvidia driver.

  All the best!

  Dindin

  < < <-*.

  * Click on the star of CONGRATULATIONS on the left say "thank you."

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

• Power goes off when the PC is turned on, it says "disabled keyboard", Vista does not START or reinstall.

  My PC with Vista Home premium does not START because the keyboard does not work. It's a Dell Dimesion E521 PC with Vista.

  This happened after a power failure; I get a black screen that says «disabled keyboard» The key board works and the USB ports have power to them.

  The START menu was initially protected by Word, but I have the game ENTER the PASSWORD off the black screen by removing the battery inside the PC.

  She said a THERMAL cut-out has occurred. Does anyone have any info or ideas?

  Thanks for your time in advance!

  reply in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1e228424-E520-4ec5-AF99-252a6e645f75/

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The internal keyboard BACKSPACE key does not work

  I have a laptop Toshiba Satellite and the BACKSPACE key does not work.

  He will start work the rare opportunity, but then it just stops working again.
  This happens on everything, including word and internet ect.

  It has been like that for a few weeks now and I turned the laptop and turn off many times.
  Is there a way to fix it myself or I send for repair?

  Please, * don't * tell me:
  Get an external keyboard
  Try it turn on and off
  Just highlight the words and use the delete key - it's annoying to have to do this all the time
  Type carefully and do not make so many mistakes

  Thank you!

  > Please, don't tell me not to:
  > Get an external keyboard

  And why shouldn't t someone recommends you to check the functionality using the external keyboard?

  It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!

  In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.

  But to be honest, I think that its simple keyboard failure and a replacement would solve this.

• Function keys not working not not in Microsoft "Natural Ergonomic Keyboard 4000. -SOLVED

  RESOLVED: the choice KVM does NOT relay commands. [Yes, I spoke with the KVM hardware manufacturing] - if someone does know of a KVM FACT support Pass-thru orders?

  Original title: F keys intellitype keyboard does not not on XP.

  We have several Microsoft installed "Natural Ergonomic Keyboard 4000" and discovered one day we are experiencing problems with the function keys.  In our software provider, we are supposed to use SHIFT + F11 to access a specific function.  However this keyboard shortcut does not work.

  I installed the latest drivers of "http://www.microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000" for Windows XP (32-bit) and Windows 7 (64-bit) and installed on the right machines.  Yet this problem persists and I can't find a way to deliver a new command outside provider software to test if it of a hardware problem of keyboard or not.

  Any suggestions?

  BTW, the seller says "contact Microsoft", SOP answer because "it is not our fault for your choice in hardware.

  The application is developed for Windows XP and later versions, each system is at least a dual core Athlon + 4gigs of memory, with the latest OS updates.

  Thank you
  Will be

  Did you do the "F-Lock" is on? -Side of the Print button.

• some keys not working is not on the keyboard

  Hello

  I have a question on the keyboard of my 7537 15. b n. space downstairs left right and 2 do not work. I tried something like remove the battery and press and hold the Start button in 15 to 20 seconds, or remove the keyboard, but nothing has changed. Please give me some advice.

  Hi Acm06

  Nice day.

  Please write to us.

  When the issue started? There was no incident of liquids lately?

  Please try an external keyboard and see if all the keys are working.

  You tried a power cycle and also re-sitting on the keyboard, there is nothing we can try now, except on an external keyboard.

  If all keys work on an external, then it is a problem with the internal keyboard.

  Please PM US system tag #.

  Concerning

• Keyboard issue - Backspace, delete, forward, backward, up to keys not working not

  I am a new user of SQL * Developer with a fresh install and I'll have a keyboard problem.
  The BACKSPACE, delete, forward, backward, up, etc. keys do not work correctly while
  I'm in the enter SQL statement window. Keys work well in all my other applications
  and they work very well when I'm on the left (side objects) of SQL Developer. It is that when I
  am in the SQL statement section enter that they do not work. Must something there be
  defined or installation in an options to allow these keys to work?

  In fact, I found a solution here in another thread.

  You must reset the accelerators.
  Go to tools - preferences, select accelerators in the menu on the left and click on the Load Preset button at the bottom right. You will receive a pop up that will highlight default, loads of hit. This is the default.

  It worked for me, it could be useful.

• Fn keys not working not not on my Satellite P200D-127

  Function keys not working not not on my Toshiba Satellite P200D-127

  I try to find the drivers for the keyboard, but not luck :(

  I'm trying to solve this problem since I bought this laptop.

  Can someone help me with this problem?

  P200D-127 is part of the PSPBLE series.
  The Toshiba European page doesn't provide the drivers XP especially for this series.
  But there are a few other P200 series and XP drivers were already released.

  Then why you n t check the hotkey Utility released for other laptop P200 series.
  Maybe it will work, if not, then there is nothing to do but wait until the drivers have been released.

• Satellite P850 - FN keys not working not

  I recently bought a PC Toshiba laptop p850/049 and reformatted it for windows 7 64 x (from windows 8). After installing all the software Toshiba etc. everything worked fine but recently I noticed that the special function keys have stopped working. They certainly worked after I reformatted the computer because I remember the first time annoyed that whenever I went to refresh a webpage (f5) it would pass the trackpad as I was not familiar with the new configuration.

  I thought that the problem may be due to software "Logitech setpoint" I installed but I uninstalled since and the problem remains. Then I tried to uninstall and then reinstall the added value of packet and HW installation software and then check all card flash/keyboard settings.

  Then I tried to check the BIOS setting with no luck. No matter what setting I put it to the special keys do not work. When I "special function keys" value and press function buttons, the keypad lights up but nothing happens, in this mode if I press fn + function keys, they work in their normal mode IE spell check or refresh or full screen, etc. When I have it value "normal f1-12 function keys" the same applies to this f5 refreshes successfully, but fn + f5 does nothing. I tried to play with the settings in accessibility and HW set up and flash cards and in the BIOS without effect (it seems that change the HW set up and bios configuration change from the other and vice versa).

  It seems no matter what I set it on the keyboard seems to be impossible to access the option special function keys. I recently got sp1 under win 7 x 64, this could be a part of the problem? I'm not entirely sure when keys doesn't work but I don't know they worked after reformatting to windows 7.

  any help would be appreciated

  Hello

  Did you restart the utility of Flash Cards, which can be found under:
  All programs-> Toshiba-> restart Flash Cards

  In addition, you must also install the utility Support Flash Cards next to the VAP (value added package)

  This utility can be found here:
  [Flash Card Support Utility for Win 7 64 bit v1.63.0.14 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 7507 selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 82164 & OSI D = 30 & driverLanguage = 42]

• Up and down arrow keys not working not

  I got the HP Pavilion g6t - 1B 00 CTO Notebook PC now for a year or two. I have been having some problems with internet connectivity and put my computer to "sleep".

  However, a few days ago my keyboard randomly started acting strangely. When I would try to type some numbers of the letter /, they would come out differently.

  E.g. by pressing the space bar arise "." ' / M ' instead

  I tried to restart my computer several times and installed an update of the BiOS that fixed all my issues except for my up and arrow keys. From now on, they have no function; I can't scroll with them and they don't seem to take the role of another key. I tried to use the keys on different programs. The key to using scroll works, but I still can't use the keys and.

  Is there anyway to get the top and down arrow keys to work again?

  Larasoft,

  You can do it yourself; It is not too terrible a task to accomplish.

  Here is the Service Manual for your computer and page 50 are the instructions to remove the keyboard.  To actually get the keyboard itself you can contact HP support at 1-800-474-6836 if you reside in the United States or to the Canada or click on this link and select your location, and the number is provided for you.

  Now if you feel comfortable, the HP support service can provide you with a quote to get the keyboard replaced directly through them so that the option is still possible.

  If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations.  I really appreciate it.

  Please answer as soon as possible.

  Thank you