HP 250 G3: HP 250 G3 SATA AHCI driver needed

Similar Questions

• No SATA AHCI driver for 6440 b

  Hi all!

  * Yes, I have read the sticky on the SATA drivers - did not help.

  Us have just bought 5 laptop computers HP 6440 b to test (and would buy a lot more), but we have a problem with the installation of win XP on it when mode = AHCI - just SATA cannot find a driver for it! The latest Intel Matrix Storage Manager driver does not contain the AHCI drivers for these:

  Hi again,

  Slipstream only 6 Port of PCHM SATA AHCI Controller driver with your XP CD-DVD "blank." Use this driver Intel Sata.

  There is error in the guide that I found.

• XP Sata AHCI Driver/help for Pavilion dv6t-2100?

  I need to downgrade laptop my sister to Windows XP, due to some compatibility issues with his favorite game. It's a DV6t-2100, as I said in the title, and I looked everywhere for the driver! I found an AHCI driver here on the Intel site, but I don't know that one to install from the file iaAHCI. Here is the list. Those with x. I've used. I have a limited amount of CD so I don't want to keep wasting them:

  AHCI controllers:
  -Intel Desktop/Workstation/Server Express Chipset SATA AHCI Controller
  -Mobile Intel (r) Express Chipset SATA AHCI Controller

  X Intel 5 Series/3400 Series SATA AHCI Controller
  -Intel (r) 5 Series 4 Port SATA AHCI Controller
  -Intel (r) 5 Series 6 Port SATA AHCI Controller
  -Intel(r) ICH10D / DO SATA AHCI Controller
  -Intel ICH10R SATA AHCI Controller
  -Intel(r) EP80579 SATA AHCI Controller
  X Intel(r) ICH9M-E/M SATA AHCI Controller
  -Intel ICH9R / / DH SATA AHCI Controller
  -Intel(r) ICH8M-E/M SATA AHCI Controller
  -Intel(r) ICH8R/DH / SATA AHCI Controller
  -Intel ESB2 SATA AHCI Controller
  -Intel(r) ICH7M/MDH SATA AHCI Controller
  -Intel ICH7R/DH SATA AHCI Controller

  Thanks in advance.

  Hello:

  Please read the XP downgrade guide at the link below:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  Consult the instructions for your model in the guide, which is located under 'Models difficult.'

  Paul

• Where is the SATA AHCI driver for the NB200 notebook?

  I searched the forum and I know that I should integrate the drivers under XP with Nlite, but I Don t find the NB200 AHCI driver in the driver download section!

  I don't know much about your model, but if you publish the chipset model, I'll try to find it for you:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=38

• G700 SATA AHCI driver for XP required

  I have to install Windows XP on Lenovo laptop, G700. For this I need driver for the SATA controller.

  I can't find a good. Could you help me and tell exactly which driver I need?

  I have gived up.

  I installed XP on virtualbox and his work

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• driver SATA AHCI of 64 - bit - Compatible with HP 6910P or not?

  I have a HP 6910P 64-bit Windows 7 Professional.

  I've recently updated the primary drive to a HARD drive to 120 GB for a 128 GB SSD. However, the performance gain was minimal.

  Checking, I discovered that AHCI is not enabled and there is an option to do so in the BIOS (to date).

  The HP Web site lists a compatible 32-bit version (7.6.0.1011 REV: C) SATA AHCI driver for this model of laptop.

  However, despite quoting the same version (7.6.0.1011 REV: C) the 64-bit version does not list the laptop of HP 6910P under the list of compatible hardware.

  Is it simply an oversight or is there a valid reason, why the 32-bit version of the driver is compatible so that 64-bit is not?

  You are the very welcome, Drambo.

  I have provided the driver because I thought that you would just install the driver mode IDE restart and change SATA configuration native from disabled to "Enabled".

  Since you changed to "Enabled" SATA Native Mode and then reinstalled W7, you need do nothing else.

  How can you tell that the AHCI is enabled?

  Go to Device Manager and click on IDE ATA/ATAPI Controller section.

  You will find your controller SATA AHCI enumerated (Intel(r) ICH8M-E/M SATA AHCI Controller).

  If the BIOS has not been set to AHCI, the controller would have said, it was an ICH8 Serial ATA Controller, or words to that effect.

  Paul

• Need Win XP AHCI Driver for my Satellite L500d-159

  Need of WXP AHCI Driver for my Satellite L500d-159

  Thank you

  Hello

  Satellite L500d-159 seems to belong to the series of PSLT9E.
  European driver Toshiba page provides all the drivers Win XP!

  The laptop supports an ATI graphics chip and the graphics card driver contains the SATA/AHCI driver as well.

  Then download the graphics of the page of the European driver Toshiba driver.
  In the package, you will find only the exe file run this exe file after the package was extracted, you will have to go to the SBDrv\SATA folder
  You will find the .inf file that is a SATA driver!

  Welcome them

• 14 - r103ng: including F6-AHCI-Driver for Windows XP (32-bit)?

  Hello Sir,

  I bought a "14-r103ng", and I'm a big Fan of Windows XP (32 bit).

  I got BlueScreens with "..." Your... »

  Later, I tried to install XP with F6 and AHCI-DriverFloppy-Image on USB.

  It seems to work, but I have several possibilities for the choice.  I don't know, I have to select Intel-driver.

  Can you tell me, if TI is possible to install XP on this laptop modern and if so, which driver should I choose?

  Hopefully, you can help me. Best regards, Tim

  Hi, Tim:

  It is not possible to install XP on your laptop.

  There is no sata AHCI driver for XP for models with N pentiumN/celeron processors.  Is there no drivers graphics Intel for Windows XP for this chipset and processor.

  The last specification chipset based Intel XP can be installed on would be one with a processor of 3rd generation with a 7 series Intel chipset.

  Now, if you want to try to add these W7 SATA AHCI drivers I zipped and attached, you can put it on the disk.

  I highly doubt they will work, but I guess you have nothing to lose by trying.

  Even if they do, you will always have the problem of no graphics driver.

• Impossible to find a job AHCI driver for windows XP, HP Elitebook 8570p

  Hi, I need help finding a driver AHCI (Windows XP) to my Elitebook 8570p. I want to use Windows 7 and XP on it, but I can't install windows XP in AHCI mode. I tried to use the driver that is posted here: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-Elitebook-8570p-Windows-XP-p... but that did not work for me. I just get screen blue when I try to install, I tried all 4 verisions of the pilot, but none works. I boot on the dvd and press f6 to add the driver before installing, but I need some other driver...

  The complete model number is: B6Q05EA #AK8

  Help, please

  Hello:

  I have attached the drivers you need below.

  You can either their wake by reading the info on the link below (section (Intel), and then read the info on how to integrate all the drivers from the downloadable PDF document.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120/highlight/true#M17758

  If you want to install the individual driver with the floppy drive then use your up/down arrow keys to scroll through until you find the Intel (r) 7 Series Chipset Family SATA AHCI Controller.

   

  Make sure that you scroll in both directions in the window, because a lot of people complain that they cannot find the driver in the window.  It's here - top or bottom of the initial view.

   

  This is the driver SATA AHCI specific needs of your laptop.
  

• Re: Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  Hi all

  I have a tecra S3-PTS30-E, which came from the company, I work for which was no longer necessary.

  I replaced the current 40 GB with two different - hdd

  Western Digital 250 GB WD2500BPVT

  Toshiba 120 GB - MK1252GSX

  I tried both separately and windows XP pro service pack 3 will not recognize either.

  I have downloaded the driver sata toshiba Web site and installed via F6 at startup, windows asks you what driver, windows 2000 or XP, I click on XP and you enter, windows continues until advising so none found HDD

  I also tried to download drivers intel after searching other threads, and it does not work through floppy.

  I also added the drivers toshiba XP ISO using nlite to create a disk slipstream and while xp is loading the disc, I noticed 'pilot toshiba raid' being installed. Same no result no hard drive found.

  Can anyone help?

  Thank you

  Jin

  > Tecra S3 - new 250 gb Sata hdd - windows does not recoginse

  According to the specifications on this page:

  http://reviews.CNET.com/laptops/Toshiba-Tecra-S3-s411td/1707-3121_7-31556311.html

  Your laptop's Ide interface, as far as I know on the old IDE interface there is a limitation of LBA 28 bits, which means that the laptop can only manage hard disks up to 128 GB.

• HP 250 g3: hp 250 g3 sata

  Hello

  I have a hp 250 g3 laptop (j4r70ea). It supports sata 3.0 - 6.0Gbit / s?

  Hello:

  Your notebook chipset supports SATA III drives, and they should run at the speed of 6.0 Gbps.

• NX 6310 250 GB sata replacement hard drive has failed three times.

  Replaced 60 GB OG. with a 250 GB hard drive. SATA drive. Drive worked fine for 6 months and died. Replaced under a guarantee no new charge lasted about 8 months and died on the last one lasted 3 months and is now dead. I read in info hp nx6310 120 GB is the largest sata drive. Is that because that was the biggest drive of the day or is it possible I'm on the biggest readers of heating? nx6310 win xp pro 250 GB. 5400 RPM sata HARD drive / min. 1gig mem.

  OK final repair on this laptop nx6310 was not all four hard drives of 250 GB that have been replaced. It ends up being a bad main bud.  I think the first time I sent what I said that I thought he had a bad main Board, as all readers worked on my other laptops, but the repair company said none, this is a bad hard drive. Anyway its good to go and I have four replacement discs. Thanks for your help.

• Satellite L555-10N: driver for WIN 7 64 bit SATA AHCI controller

  Hello

  can someone help me find a driver SATA AHCI controller for a fresh install of Win7 64 bit.
  Win7 OS installer asks drivers to storage before installation of operating system start. Normally he accepts driver .inf and .sys, but not such drivers in the driver package StorageManager, found on the driver Toshiba download page.

  We can I find this driver for the installation of the OS?

  I installed Win7 on several machines, but I've never used driver SATA. The HARD drive was recognized by the system each time.
  Visit the Intel download page. I'm sure you can download the SATA driver it.

  https://Downloadcenter.Intel.com/

• Equium P200D how to enable SATA AHCI mode so I can install OSx86

  Hi im trying to install OSx86 on my new laptop Satellite P200D-139 I bought this week.
  I need SATA AHCI mode value. All other pc, I used, I was able to do it in the bios but with this laptop, the bios is so cut off from the option isn't there.
  Does anyone know how to enable AHCI mode so I can get OSx86 to start.

  Thank you
  Mark

  If I'm not mistaken, you get the famous message "still waiting for root device", right?
  Well, I really do not have much experience in the Mac OS, but it appears because of SATA drives and Yes, you're right, AHCI mode works for most of the laptops or desktop computers.

  I think there is no way to activate this option. But you may find help looking for some instructions on osx86project in google.