HP 250 G3: USB problem and more

Similar Questions

• Vista Home Prem - problems since installation on 26 August updated - USB problems and everything deleted before the update restore points

  I have a Dell XPS 430 quad-processor. Receipt of the August 26 as update automatic updates. Since the computer was restarted after autoupdates, I have problems. Biggest problem is when I switch to another port my 4 ports KVM Trendnet TK - 407K and back on my Dell computer - the computer is blocked and the video is all garbled. My only recourse is to start the computer cold. After the first time it happened, I knew immediately updates, so I went in my restore points to restore back before the update. When I did restore bluescreened, but I was unable to capture data as computer restarted itself and get into the routine of starting fix. Difficulty of startup said it could not solve my problem.

  When I returned to restore to try to restore once again, I found that all my restore points have been removed. I found a utility called the shadow on the web Explorer and installed. He seems to find all my data restore point on the recovery D: drive, but Windows is not seeing them.  I should also mention, usb-wise, given that these updates have been applied, my Canon digital camera is not recognized when I hang it in one of the USB ports.

  Don't know what to do at this point. If I stay on the port on my computer using the KVM switch, my PC at home works well. Unfortunately, it is not realistic that I need to do my job in two laptops that are also connected to the switch.

  I'm tempted to just delete all the updates that have been installed on 8/26 to see if that helps - esp KB973879 I read on this patch causing a lot of problems with other computers.  Another thing that I have not tried is to use the restore from a command prompt application.

  Any suggestions would be greatly appreciated!

  Thank you!

  Hi brab61,

  Welcome to Microsoft Vista answers Forum!
   
  It is good to know that you're not faced problems with your computer.
   
  However, I suggest you go ahead and turn on Windows automatic updates to fix security vulnerabilities and it is beneficial for you to have these updates installed.
   
  Learn more about Windows Update, you can use the following link: -.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/default.mspx
   
   
  You can run the System File Checker tool before you activate the automatic updates.
   
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2 right click "cmd" in the list programs, and then click Run as administrator.
  3. you are asked to enter an administrator password or a confirmation, type your password or click on continue
  4. at the command prompt, type "sfc/scannow", and press ENTER.
   
  Note:- After that, you can now install an update both manually and check the update is causing the problem and let us know to help you and solve the problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope this information is useful.
   
  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP dv6810us 'Base system device' problems AND MORE!

  Hello!

  I have a problem I have been struggling with for several months now. I do not know what is happening and am puzzled because. I will describe what is happening as well as I can and expect an answer.

  My laptop is a:

  Laptop HP Pavilion Entertainment PC model DV6810us. I run Vista, of course.

  I had this laptop for my 16th birthday a year and half ago. As expected, it worked like a power all the time. Around my 17th birthday, he began to have some overheating problems. Attaches easily with some canned air.

  However, soon after, I started to have some other, more distinct problems. The first was, on start-up, I've received an error message indicating that the module of HPwinmx (sp?) had stopped working. A few weeks later, I started to receive alerts from Windows with "new hardware found". Specifically, three system of Base and an IEEE 1394 controller devices. At the same time as these physical alerts, my ports series and s-video stopped working, my cd player, as well as my multicard reader.

  At this point, all attempts to reinstall the drivers for those devices were unsuccessful.

  Needless to say I was due for a while on what was still working. There is not enough money to get the extract. Sometimes, at the start, all these devices would be online for no apparent reason. I reasoned that the material must be end - no melted connections or shorted wires. It must be in the drivers.

  Last Thursday, my laptop has informed me that I had no speakers, microphone or headphone jack. Being a music and a drug of Hulu, which could not support. I decided the best way to solve this problem would be to back up my files to an external drive and wipe my laptop to a factory state using System Restore HP. Well, I just finished that about 01:30. And now, nothing, and I mean absolutely nothing changed. Same features, same problems, etc, etc.

  I cracked her open to find internal damage. I don't see nothing, for what it's worth. =/. A crossed the CMOS and BIOS for info. No change. However, when I look at my startup journal, he told me what PCI bus are turning back errors. I have been unable to pause and see what he said, and the information was retracted before I could read.

  I couldn't be more confused about what is happening here.

  For the love of God and all that is holy, just WHAT is going on here?

  ---------

  For reference, here are the details on errors for three basic system devices:

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0843 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0592 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0852 & SUBSYS_30CF003C & REV_12
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Description:
  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05.

  Signature of the problem:
  Problem event name: PnPDriverNotFound
  Architecture: x 86
  Hardware ID: PCI\VEN_0180 & DEV_0832 & SUBSYS_30CF003C & REV_05
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?link...3&clcid=0x0409

  Most certainly. The cost of a new motherboard is going to be at least $ 250 for you and this is simply too much to spend for a repair. Your parents may think differently. A new motherboard is about $150 online (not of HP they charge more than double that) and labor is about $ 100 to $ 150. You would need to find a reliable repairperson or there are several good online, too.

• XP Home: activation problems and more

  My house burned down and my church gave me a XP Home, had been purchased at the origin of one of the elders who had a computer repair company. The Church is used only for two years for the system/dvr security configuration.

  I've been stumbling trying to figure out what to do and appreciate any information.

  I found a different productid in the registry than the sticker. I tried both numbers to activate and nothing works.

  Noel:
  the machine would not copy - paste so made this screenshot.
  in order to not yell at me * LOL *.
  [code]
  http://www.TurboImageHost.com/p/12365357/diagresult.jpg.html
  [/ code]
  (could not find how to tie in this forum. I'm sorry. get my legs of land around here.)

  The sticker COST PC says Windows XP Home Edition
  number 25 begins with RJ.
  However, checked with jellybean and xpquickkey... the two 25-number starts with DG.

  Has been thought, perhaps a reader of diff.hard the box came with? You are the pros.

  There should be no need to reinstall just to erase a non-genuine notification - so that there aren't serious problems elsewhere.

  Please download your newspaper the SFC CBS run - you will need to copy on the desktop first, then upload it to your SkyDrive favored public or other fileshare site and post the link to it in your response.

• Pavilion DV2000... start problems and more

  OK this dv2000 I'm trying to fix for a friend does not start with a long series of equipping the Sub and power off for a few minutes, then it starts very well, will not restart when I tried to so, I finally got to do start in the recovery partition, recovery worked (f11) until it starts to formatt then I get error 1002 so I tried to restart and to solve this problem in another way after a few minutes of turning on and off it won't start at all now lack BOOT.someextentionhere I gave up for a min to do some research

  now the turning on and off thing is really weird for me, she also said he had scratches before the cursor appears after the vista boot screen.

  material?

  Do you have

  (1) to reinstall the memory module

  (2) soft resets the laptop. (remove the battery and unplug the AC adapter / CC and hold the power button / stop for 30 to 60 seconds)

  BTW... If you started a full restore using the recovery partition and it is not ended, you may need to restore with HP System Recovery CD. Hopefull your friend did and kept a set (there are two CD as a whole)

• Problems, problems and more problems.

  Not sure where to start with this one. 12 hours and I still have not an instance VCAC work.

  I have:

  1 x VCAC device

  1 x VCAC identity device.

  1 x Postgresql server.

  I have configured all they way I think it should be, but I can not connect to the shell-ui-app interface with the user admin SSO ([email protected])

  The strangest thing is, I don't have any errors when I install the server vCAC for SSO on the SSO server. Entering references above, then allowed me to connect and configure the box.

  All I get now is a message "invalid user name" or password.

  I. mod. puzzled. And frankly ready to throw in the towel.

  < rage > This is by far the worst Installer for all the applications that I have encountered in some time. < / rage >

  The SSO administrator password had one; character in it. Alphanumeric password worked.

  If that fails, VMware. In case of failure.

• * USB ports and my printer problems

  My laptop is Windows Xp edition sp2 family.

  My old HP laptop computer of 4 years has 4 USB ports. Unfortunately, 3 of the 4 ports broke physically, so I only have a single functional port.

  A port that works cost of my cell. So I know it works. But now, only 40% of the time it will print when I plug my 750 HP printer all in one in it.

  Otherwise, it will display a "?" on the printer in the taskbar icon. Once, I unplugged the USB cable and plugged into the broken USB port holding it still and it actually print my papers.  But as I said I have been lucky that day cause these 3 ports are broken.

  What can I do to make the only port 1 have, can work for all devices I. It seems not only act with the printer.

  In addition, supplants ports broken something painful, costly or difficult to do? I know it can vary depending on the brand of the phone... But overall, it might be an easy solution?

  Thank you all in advance...

  Hello
   
  Method 1.
  Let us run the fixIt in the article below and check.
  http://support.Microsoft.com/kb/925196/en-us

  Method 2.
  Let us, remove and reinstall the usb controllers and check.
  To remove and reinstall all USB controllers, follow these steps:
  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.
  b. click on the Hardware tab.
  c. click the Device Manager button.
  d. expand Bus USB controllers.
  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  f. restart the computer and reinstall the USB controllers.
  g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.
   
  Reference:
  Advanced troubleshooting tips for General USB problems in Windows XP
  http://support.Microsoft.com/kb/310575
  You can also download and install the dricers from the link below.
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=295845&prodTypeId=18972

  It is an alternative to repair broken ports, you can purchase a usb hub, you can insert it in the usb port that works, and then use the available ports on the hub. Find out the nearest computer to usb hub store.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Local network problem and drivers USB, HP Pavilion G6-2314AX

  Hello, I'm having a problem in the installation of the USB drivers and LAN adapter. I am unable to connect to the Internet, the LAN icon in the taskbar shows sign of the cross. Because this laptop is not any CD of driver with the pack so I am unable to connect to the internet and install the drivers automatically.

  Also, I tried to search for drivers LAN and USB in another computer, but couldn't find any. I installed Windows 7 64 bit, I can't update windows, nor can I search for a material on the HP driver download page. At least, I could use the LAN to work properly so I can connect the laptop to the internet and scan for the rest of the drivers.

  Kindly help me now I am unable to do anything with the laptop, I just bought the laptop yesterday and still I could not find the drivers.

  Thank you very much

  Jean René

  P.S. This thread was moved from the business PCs - Compaq, Elite, Pro for laptops - pavilions, Presario - Hp Forums Moderator

  Hi, Jean René:

  First install the AMD chipset driver and restart. You want the first file listed.

  Who will install the SMBus Controller and USB 3 controllers.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Then all the W7 x 64 drivers for this model of the G7 should also work on your.  DO NOT USE THE FILES of the BIOS

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en & cc = us & prodNameId = 5275620 & prodTypeId = 321957 & prodSeriesId = 5262610 & swLang = 13 & taskId = 135 & swEnvOID = 4063 #11360

• Sound and USB problems on a P10-221

  Hello! I am Portuguese and I do not write well.

  I have a problem with my bluetooth after installing Windows Service Pack 2 and an update of the Bios.

  I installed the Version 1.90, after activation of my bluetooth, laptop computer closed down.

  After restarting the laptop, the usb connections and the sounds have disappeared, what can I do?

  The laptop is a Satellite P10-221

  [Edited by: moderation of the Forum]

  Hello

  In a first step, I would re - install the drivers for the chipset for your laptop.

  After that uninstall the battery Bluetooth and re - install also.

  There is also an information sheet available online to get information on the new drivers for Service Pack 2. Watch http://eu.computers.toshiba-europe.com

  Free configuration (4.90.57) and PC (3.0.6) Diagnostic tool are available for users of Windows XP Service 2.

  Take a look at http://eu.computers.toshiba-europe.com to get updates for download.

  Keep me informed of your results

  Good bye

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

• External drive USB 500 GB PX1394E burp and more

  Since yesterday, my external 500 GB Toshiba USB drive burp more.
  The LED becomes red instead of blue when I turn it on. Needless to say that my entire CD collection is on it, so it is quite a mess.

  What are my options now?

  I bought the external drive in Germany, a little less than a year ago, model Toshiba PX1394E - 3 50.
  Stupidly, I can't find the receipt anymore, so it won't help if I just bring it back to the shop.

  Where Toshiba can I apply for?

  How can I open the case to see if the drive is broken, or just the USB interface?
  The enclosure has two small screws, but by unscrewing seems to have no effect, it seems that they are just to fix a foot plate support.

  Help, please! It is a nighmare!

  Thank you kind
  Ulf

  > How can I open the case to see if the drive is broken, or just the USB interface?
  Don t what a controller can be broken. If something is broken, then this might be just the HARD drive.

  If the HARD drive burp more then the hardware failure is possible and only a replacement can help you. Stupidly that you can't find the verification of sales because it is necessary to get a replacement under warranty

• money more sunset "files needed to run the Planner missing or corrupted" then program encounters problem and closes. Downloaded multiple times on multiple computers

  money more sunset "files needed to run the Planner missing or corrupted" then program encounters problem and closes. Downloaded multiple times on multiple computers

  Hello

  I suggest you post the same question in Microsoft Technet forum for Microsoft Money Plus Sunset related issues. We have a dedicated team to help you with the problems of Microsoft Money Plus sunset.

  Microsoft Money:

  http://social.Microsoft.com/forums/is/category/money

  Hope this information is useful.

• Message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no sound more until I reboot

  I have a hp Pavilion working with XP but recently I installed Windows Office 2007. Since then, I have problems with the sound system. I got a message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no more sound. I can't open the volume control as the system says that nothing is installed. I always need to restart my computer to get the sound working again. Help!

  Thank you, Jerry. I'll try it, but for now it works well. I fit it and it seems to have done the trick.

  See you soon,.
  Karine