HP 2509 m screen flashes and turns off using a HDMI Cable entry

Similar Questions

• Screen of C850 - 1 H 8 satellite flashes and turns off using SSD and win 8

  Hello, I bought a C850 - 1 H 8 of Ebuyer and I removed the hard drive installed windows 8 on it and installed my SSD, and then a clean installed Windows 7.

  The laptop was working perfectly, and then after a little more than a month, the headphone jack has become defective intermittently. I contacted Toshiba, they picked up the computer laptop, fixed and returned.

  When the returned laptop, I still pulled the hard drive provided with Windows 8 and replaced by my SSD with Windows 7 top.

  The laptop screen started flashing on and outside. So I thought ok, they must have changed the material. Using the SSD even I formatted it and then reinstalled Windows 7.

  I find that contrary to front - that my laptop according to the system information for Windows - is manufactured by LG and not Toshiba.
  I also find that the desktop screen and startup splash turned into a screen LG and not an a Toshiba.

  I contacted Toshiba and they gave me, told me to ask for a replacement from Ebuyer. I was passed between the two companies constantly. Then I took the hard line with Toshiba and said that they have damaged my computer and I want a replacement or I will not buy another Toshiba product.

  I then return a petulant response from Toshiba, actually insinuating that aside from the faulty earphone Jack, it was my fault. Incredible.

  I had not used my new laptop at all really after all of this, because I'm sick of all this. But today I started to use it again, and after some time of use, the screen flashes again. Even after using a new installation of Windows 7 and the clean use of Toshiba Windows 7 64 bit drivers for the right model.

  What can I do?

  See you soon

  + The message was edited summer - subject wire +.

  > When the laptop returned, I still pulled out the hard disk provided with Windows 8 and replaced by my SSD with Windows 7 top.

  It was not good because headphones is part of the motherboard and I think they replaced the motherboard. In such cases, the bulk of the material is changed and do not use the same system pre-installed due to the compatibility of the driver. This can lead to physical problems.

  But the screen flashes at the beginning with 8 win preinstalled?
  Have you seen the LG sign turn on/off the unit after replacing the mobo?

  Maybe service guy (ASP authorized service provider isn't Toshiba but independent company) I forgot to update the DMI and therefore LG sign appears on the screen.
  But in my opinion this should not affect the screen but this should be verified using Toshiba original image (Windows 8)

• Why do Satellite A100 screen flashes when turned off?

  Hello
  I have a toshiba A100, Go 7600 Gpu, just bought there is two weeks and im very pleased with the quality and performance far :), just noticed one thing today, the room was turned off and the laptop turns off with the screen in open position, I leave it open normally when at home, I noticed that the screen flashes as fixed every 1 min in what appears to be an interval of time with or without AC connected, not a flash very bright but not easy to notice, but I'm sure the flash, so my question is should I worry about this? Thanks in advance :)

  Hello

  What do you mean with the screen? The LCD internal? Maybe you didn t stop the machine itself.

  I also suggest you update your bios and your drivers, maybe it s just a software related issue...

  Here´s a link to find the bios and latest drivers for your computer:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Give some information about this case, could be interesting, what problem is.

  See you soon

• I was using my Ipad air then the screen freez and turn off itself until now

  Please I need your help, my Ipad air I was using it and all of a sudden the screen freezes and cut in itself can help me?

  Force the restart of the unit (does not affect the settings/data/music/apps/etc)

  1. press and hold the sleep/wake button

  2. press and hold the Home button

  3. hold both buttons until the screen turns off, then back on with the Apple logo.

  See also this:

  If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support

• After installing my essbase of planning server just flashes and turns off

  Dear all,
  
  Until yesterday, everything worked well.
  After installing my essbase of planning server just flashes and goes out.
  I use win xp, system9.3.1.
  
  ARBORPATH: D:\Hyperion\AnalyticServices;D:\Hyperion/common/EssbaseRTC/9.3.1
  HYPERION_HOME: D:\Hyperion
  PATH:D:\Hyperion\AnalyticServices\bin;%HYPERION_HOME%\common\ODBC\Merant\5.2\Drivers;D:\Hyperion\AnalyticIntegrationServices\bin;D:\Hyperion/common/EssbaseRTC/9.3.1/bin;D:\Hyperion\common\CLS\9.3.1\bin\windows
  PLANNING_HOME: D:\Hyperion\Planning.
  
  Thank you
  Vikash

  You have made the right choice.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• weird to see the screen shapes and turns off

  My wife new iMac, El Capitan, bought last week, when woke up from his sleep, the poster shows strange square of color and then becomes solid. no hard drives, dock or anything like that

  You have 14 days to return for some reason any if purchased from Apple, take advantage of that. Also, you have 90 days of free telephone support AppleCare. Enjoy these customer service options for you! If you are not familiar with the AppleCare, please click http://www.apple.com/support/complimentary/

• flashes and turns off the video when you play, has sound

  Where to play games online TI juice flashes. I have sound but no video. This also happens when I watch QVC on my computer.

  Hi yesndeed70,

  ·         What version of the operating system is installed on the computer?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         You get the error message?

  Follow these methods.

  Method 1: If you are using Internet Explorer, follow the steps in the article.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Method 2: To update the drivers to display/graphics.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For reference:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

• Screensaver Windows 7 Pro x 64 and turn off monitor do not work

  On a new install of Windows 7 Pro x 64 (detail), the screen saver and turn off the monitor features do not work.

  I put the simpler (in white) screensaver at 1 minute and turn off the screen in 2 minutes, but are never triggered.

  I don't have a wireless mouse, as I read that may cause problems. All Windows updates have been applied.

  Please notify.

  Try to reinstall/update the chipset drivers and associated power, of your motherboard to the support site, maybe also an update of the Bios and

• Satellite P300 - 20 H refresh the screen every 10 minutes and turn off during 3 sec

  Hey,.

  Basically, I bought my P300 Sat about a month previously and each time it runs, battery, the same error will occur...
  It will update the screen every 10 minutes or more and turn off for 2-3 seconds.

  This isn't a big problem, but it is annoying that I can not sort.
  I tried to run a check of problem to find a solution, but he says that he can not find a.

  Help, please
  Thank you.

  Hello!

  Can you please explain what you mean with refresh? And what exactly is happening?

  It is not easy to say what the reason is for this, but have tested an external monitor on the laptop? And you can determine if it s a problem with the internal display or not.

  In addition, you must make sure that you have installed the latest display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you installed a display driver Toshiba not you should remove it. These display drivers can often cause problems and don t have protection against overheating.

  Good bye

• Why the screen of windows 8 turn on and turn off.

  Why the screen of windows 8 turn on and turn off.

  Hi Richard,

  Thanks for the update.

  Have you checked for loose connections power cable?

  I ask you to contact HP support, as this seems to be a hardware problem.

  If you have questions about Windows operating systems, help us on this forum.

• Qosmio F20-154: BSOD and turns off

  Qosmio F20-154 goes to blue screen and turns off if the cd is inserted or if the flash drive is inserted
  Also hotkey error on turn on the computer

  Hello

  This means that you can not read data CD or USB key?
  Is this correct?

  Have you tried to boot from the CD or DVD?
  Have you tried to reinstall the OS?

• Satellite A100 - 383 PSAARE - screen flashes on then off

  Dear all,

  I have a problem with my pc (a PSAARE 100 383 Satellite).
  I've updated to Windows 7 recently. A few days after the screen started blinking and turning off after the connection.
  There is no way of next turn (not Fn + F5). The problem has worsened and I could not display at all.
  I managed to connect the pc to the TV and I did the following:

  1 reinstalled Windows 7. + It seemed to improve but a few hours after you reinstall the problem reappeared.
  2. retrograde to Vista. + Same as before but it seems to be more stable.

  I use a cooling for pc support. I don't know what do.
  Can someone give me a hint on what to do to fix this?
  If it's a hardware problem would be to fix?

  Thank you all in advance for your help.

  Kind regards!

  Hello

  You mean that the works display for a while and then it goes black?
  Have you tried a different display driver?

  Have you noticed a higher temperature while this problem appear?
  Higher temperatures could affect the GPU.
  You can try to clean the modules of cooling using a jet of compressed air.
  This would keep going down.

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• On Windows 7, the screen flashes and goes black. It shows that the display driver has stopped working

  I have premium home edition of windows 7 I had a problem with my display driver. The screen flashes and goes black and then turns back on with a message in the bottom right of the screen that reads «display driver stopped responding, but recovered» It has also closed and restarted windows

  Hello

  First, download and install the drivers from the ATI site, if you have already done so, check the graphics card and cabin temperature by opening. This normally occurs when the temperature is too high. Or if a person has overclocked graphics card.

  Thank you

  Nitin Aswani