HP 2510 "Unable to communicate with the printer" error.

Similar Questions

• Unable to communicate with the printer HP 4630

  Continue error message of "Unable to communicate with the printer." Even when connected by USB.

  Have reinstalled the software several times, checked the wireless (no problem), printed many pages of configuration directly from the printer.

  I keep trying to add the printer to my preferences. One thing is that it will only add like a scanner or fax, a PRINTER. It is also called Hello Scanner. Why can't I add as a printer?

  Now, it will not also let me COMPLETE reinstallation of the software, it freezes at the section add printer and I can't move forward. So frustrating...

  Help!

  Hi @PKahn

  It seems that the computer does not recognize the print driver.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• error: unable to communicate with the printer

  I can print a test page for the hp deskjet 3510 series: hp printer assistant application on my laptop and I can print to the printer by sending an email, so I know that it is connected to the network and I know that my laptop can be printed on it. But when I try to print from Word or any other application I get an error: unable to communicate with the printer

  Any ideas?

  Download and run this: http://support.hp.com/us-en/document/c03286146

  What did he say?

• Unable to communicate with the printer E710 6500

  I have a HP Officejet 6500 a Plus E710n-z.  He has in the past, but is no longer connects (by wireless) to my computer (Apple OSX 10.8.4).  It became intermittent in the last month, and then did not answer at all.  I had a growing list of items to be printed.

  I followed each step- http://support.hp.com/us-en/document/c02205477 .

  WiFi to each is not a problem.

  The printer has been disconnected (deleted) as the printer from the computer.  I was able to add in the part 'scanner' printer, but cannot add to the printer - it has the message "unable to communicate with the printer.

  What should I do next?

  I you sent a private message with the steps you need to perform the reset.

  Good luck
  Kyle

• HP laser jet 8150n, unable to communicate with the printer?

  I have problem with my printer, I have him connect with lan cable and the green light only works printer not at the top of the Tower, I can search and find but when it verifies something it says 'Unable to communicate with the printer' one has the solution? Thanks in advance.

  I'm sorry, but you have the wrong forum. These are the forums of consumer printers of the class, and you have business to printers in class forums business like yours. Just follow the link and you will be in the right place.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.UBw16U2PVM4

• Questions of UPD on 4700dn printer - unable to communicate with the printer

  Hello!

  I'm testing the UPD on my laptop which has Windows 7 64 bit on my network printers all in my building. All network printers work fine except one... Color LaserJet 4700dn.

  When you use the UPD interface when you try to print, I try to use the IP address of the printer and it cannot connect. "When you use the search for network printers option, it recognizes the printer, but when I try to connect, I get the error ' unable to communicate with the printer.

  I changed the host name of the printer, changed the IP address on this subject, I can ping the printer and print using the print server, I rebooted the printer... Even got a older laptop that has Windows 7 32-bit and used the UPD 32 bits and the same symptoms occur.

  Any ideas because I hit a brick wall.

  Thank you very much!

  Looks like you can set up a standard port and print ok from a print server.  The UPD in the stream you describe will attempt to make multiple calls SNMP to determine the abilities of the printer, and those who are failing, causing the UPD to throw the error you see.

  Take a look at the network settings in the SAP.  Specifically, under Security, management of the protocols and the SNMP tab.  Watch to see if one of these parameters differ from other devices that work, like maybe SNMP is disabled on the YOA 4700n.

• Unable to communicate with the printer hp deskjet 1000

  I have used this printer for almost 2 years and problem say never FAILED before... forst my text printing is distorted then he showed in offline mode and later its says printer is ready, but when I give the command of printing... it said 'cannot communicate with the printer.

  Pls help!

  My problem was solved by removing and reinstalling the drivers... .any way thanks for your help

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  

• ScanJet G3110 - 'unable to communicate with the scanner' error message

  This Scanjet has worked well over the years.

  I don't remember making any changes, but now when I click on any option (for example copy or scan to email... all options) I get the error «unable to communicate with scanner» HP

  When I click on "Preferences of the Scanner", the Apple preferences page with a popup that reads:

  To use the "HP Scanjet", preferences preferences pane system must leave and reopen it.

  I click OK and system preferences change to 'Preferences system (32-bit)'

  I click on the HP icon and it opens to "no value / not connected".

  I have reset the scanner; have you checked all connections... no change.

  I put on computer.

  The scanner scans noise when it starts up.

  But when I press the "scan" button (or any button) on the scanner itself, nothing happens.

  Using OS X 10.6.7

  Any ideas?

  Hello nikhil_gupta

  The Scanjet series of scanners is of commercial products. I suggest you post in the HP Business Support forum for a better chance to find a solution, because it's the boards of HP for the consumer and there are people less familiar with this product range.

  You will find the Board Commercial Scanjet here.
  HP Business Support Forum: Scanners

• Error 'Unable to communicate with the printer' HP 8600

  Hi all

  I found a number of discussions on this problem but have not yet found a solution that works for me.

  I recently installed a new of Officejet Pro 8600 on my network.

  It is the default printer, shared, wired, static IP defined in router and the printer.

  When I try to print every morning, I get the printer communication error.

  The router shows as a device connected to the correct IP address, I can ping, I can access the web page with printer IE (which reports the status as it is connected), the HP printing & doctor reports Scan everything works correctly (but I can't print a test page), I can print the test directly from the printer page, the printer console indicates that the network is configured correctly the calendar switch option is disabled, but we cannot print any documents of any cable or wireless to pc (win 7 and win 8), and we cannot airprint from our iphones and ipads... until I have power cycle the printer.

  (Printer, router, cable modem, that all remain under voltage 7 x 24, plugged into UPS).

  Some participants of the forum have suggested that it is a question of power saving mode, no correction.

  But it's really not practical to have to run to the printer for this cycle before we can print from our cell phones.

  Is there a solution?  Maybe I forgot something in my config.

  Thank you.

  3/27 patch: Airprint for iphones and ipads work while printing not because of windows pc.

  Update:

  By MissTeriLynn suggestion, I created a traffic rule in my Norton Firewall to open all ports, incoming and outgoing, between the printer and my desktop PC.  As a result, no change. I always get the message 'Scanner communication cannot be established' when you try to scan interface desktop HP 8600, or from the printer console. (Scanning from the integrated Web server still works).

  Also, when I tried to install the update of the firmware of the printer, the HP installation software could not find the printer on the network until I have turned to bike it.

  I discover that this communication problem is unrelated to the low power of the printer.

  Whenever I restart the PC, communications is lost and can only be restored by cyclic power the printer.

• Unable to communicate with the printer

  Installed el capitan on my iMac, and now he can not comminicate with printer. Why?

  Remove your existing printer in System Preferences > Printers & Scanners and adding it again may be the fastest solution. Better yet is to "reset printing system", as described here:

  OS X El Capitan: reset the printing system

  Then add the printer again:

  OS X El Capitan: Add or remove a printer

• 'Unable to communicate with the printer' msg since photoshop when printing to 5510

  Hello!

  I played with this all afternoon with no luck!  I am able to print my wireless hp 5510 via windows and test pages, etc... Downloaded the hp tool and it says printer is fine.  I can print on my Epson fine of photoshop also...

  Only, I get this error message when you try to print from photoshop.  I use an automatic ip address for printer and

  updated and checked that it corresponded to diagnostic printing...

  any other suggestions would be much appreciated!

  Thank you

  Sharon

  I also ensured that the firewall settings have been set for photoshop as a previous poster suggested...

• Error "" unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  "Unable to communicate with your printer - this may be due to a firewall - check port TCP/UDP 139 is unlocked - reconfigure the firewall.

  Original title: how to install the printing software to solve the error message?

  Hello

  Follow the troubleshooting steps in the following article and make sure that port 139 is unlocked:

  Windows Firewall may block some programs to communicate on the Internet after you install Windows XP Service Pack 2

  See also:

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  Note: Information provided in the article applies to Windows XP with Service Pack 3 (SP3) installed.

  If you use a third party firewall, I recommend you contact the software vendor for assistance.

• HP Officejet Pro 6830: Unable to communicate with the Scanner

  Printing is fine and just impossible to scan.

  I tried to solve the problem of scanner/copy of the measures:

  1. run a 'HP Print and Scan Doctor' to check

  2. click on 'Scan of difficulty' to identify the error

  3A through the steps with all green ticks, with the exception of the driver with a «!»

  4. with the result, I went and download the latest driver to update the scanner and also did a update system for you ensure that the printer is so far

  5. after the update I still get this message from the scanner "Unable to communicate with the Scanner" and when I press the button of scan/copy the printer only a "ding" sound occurs but nothing is scanning / copy

  Note: I brought the printer 2 months ago and this is the first time that's happened

  Hi @Flash1688,

  Welcome to the HP Forums!

  I see that you are unable to communicate with the Scanner with your HP Officejet Pro 6830 on Windows 8.1. I'm happy to help you!

  If you just try to make a copy with the printer, it works? You see on the screen of the printer error messages? Copy of Documents. Also, if you lift the lid of the scanner during the copy process, you see a light come ON and the scanner bar moving?

  In the meantime, please, try the procedure described in this guide, a message 'no computer found' for HP Officejet 6810 and HP Officejet Pro 6830 e-all-in-one printerand let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Error: "unable to communicate with the TWAIN device" with brother MFC7820N

  Original title: can I connect a scanner through a switch?

  I'm trying to analyze something like I did it many times with my brother MFC7820N hung on my tablet. But recently, I replaced a 2nd router I had in my system that failed with a new Dynex switch.

  I have my internet modem and 2 computers connected to a Linksys wireless router. I have another ethernet cable connecting the router to a new switch. I have my 2 printers attached to the switch. One is a Brother HL-2700CN color laser and the other is a brother MFC7820N mutli-function. It use PaperPort to scan stuff on him, since provided on the CD with the device.

  So today I open PaperPort and click the Scan button and it appeared an error saying unable to communicate with the TWAIN device box.

  So I clicked on a doc shown in PaperPort that I had scanned a few weeks ago and I click right and select Print and printed to this MFC7820N.

  Then I come back to click on scanner again and yet again, it appears that box. So I watch and WIA-Brother MFC-7820N LAN is displayed in the Scanner marked drop-down list box. So I switched the power of the MFC and tried again and it still appeared that same box again.

  OUCH! I'm going nuts! You have any ideas?

  Hi Jeff has Davis,
   
  Method 1: Uninstall and reinstall the driver again and check if it helps fix the problem.
   
  See this article for more information:
  How to manage devices in Windows XP
   
  Method 2: Try the suggestion given in this article:
  'Could not enable TWAIN Source' or 'He has not find scanner' Error Messages are displayed

• Aspire laptop will not connect to the wireless printer, he said: he can't communicate with the printer

  I have a laptop sucks and when we first put in place it would print to the printer wireless, but now he says that he cannot communicate with the printer. I know just enough to get me in trouble with computers. Any suggestions?

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. which version of the Windows operating system is installed in the computer?

  2. you have any security program installed on the computer?

  3 are you aware of any changes made to the computer before the show?

  If you use Windows 7, then I suggest you to go through the steps in the link and check.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.