HP 3050 leaves the vertical line of toner on paper

Let the vertical line of toner on paper

Hello

You should check with the help of HP as it's a problem with the printer and not Windows.
Also check their forums where there are others with the same printer.

Support HP & drivers
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Offset of the vertical lines

    A couple of weeks ago, I bought a Photosmart 7520 to replace my HP D110. I posted a problem here and received a quick solution. I hope that this happen.

    My problem is with vertical lines. The first file that contained a small table is a downloaded pdf file. When I printed this some vertical lines shifted just a little bit - small but noticeable. In fact, I did not notice it until I returned to it after printing an Excel spreadsheet and the problem of the vertical line noticing.

    At this point, I opened HP printer Assistant, to maintain the printer and lined up the printing and print heads cleaning heads. Clean print heads print page showed several vertical line for verification and they were very good: no earthquake. I still once printed the pdf and again once there are sections that were slightly off. Then, I created a small table in Word and do print. Same result: small shift.

    I made another clean and align another and another test print. Vertical lines have always shifted.

    The move was in line. I mean, when I looked at two different prints of the table of the word, the movement was in the same places; identical.

    The spreadsheet has multiple lines. As I scan down the vertical border between adjacent cells, I see a slight shift to the left on the bottom of the third cell. Sweeping down more of three cells the border comes to new right there where it was originally. That displacement, then back left again to the right, seems to repeat on all three rows.

    That describes my problem.

    Any ideas?

    Thank you.

    (My system is Windows7 64 bit running on a Dell StudioXPS computer).

    I must admit that I forgot to update my request.

    After a few days don't get any suggestion, I called the store where I bought the printer asking if I could come and exchange it for the same model. I was told that, because it was more than two weeks after the purchase, there will be an additional cost. Until I reluctantly paid the extra money, I called HP support.

    Basically, what the tech support person is to uninstall the printer driver and install the latest version. Which corrects the problem. The process took time, but the result is that the printer works fine now, including the vertical lines.

  • CP2020 leaving 2 vertical lines on the printed pages

    Our CP2020 has began to leave the two vertical lines to the bottom of every printed page - more print on the page, the more visible the lines. I printed a test page and join to view.

    We don't have any kind of warranty or service contract but I am the IT Manager and can do an interview or anything else that is necessary, I don't know what needs to be done to solve this problem. Thank you!!

    Replace the black toner cartridge if lines are only in black.

  • break a subform that contains vertical lines between pages / break the vertical lines between pages

    Hello

    I have a table whose fields can develop. There is an another subform on the side that contains two vertical lines with the height increases if the height of the table increases. The table and the subform are in a provision passed. The challenge is that the subform with the lines does not break between pages. The subform is enabled to allow page breaks, but still it does not break. How to get there?

    I solved by creating the columns on the side and leave the table and breaking lines between pages. The cell border will serve as lines.

  • Flashing of the vertical lines in the tab bar?

    There are small vertical lines in the tab bar. They appear after the closing of the tabs. They are flashing, then change places when I place the cursor on any Firefox buttons or bars. And sometimes, they are flashing and the text cursor in the address bar of mirror.

    Disable all modules and themes does not affect them.

    I'll try to add a screenshot of the problem.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Show the vertical lines of blue green on Tecra M

    I have a blue vertical lines on my laptop screen.
    They seem to be present when I have a white background (for example, a web page).

    The lines disappear when I move my mouse over the screen and reappear when the cursor moves. I have no lines on the video or pictures, just white painted.
    It's really annoying, please help.

    I use Win XP SP3.
    I have a Nvidia geforce 6600 128M video card.

    Hello

    Have you noticed the same problem on external monitor or TV?
    Check this box

    It s really strange that you it ONLY the lines that maybe that it melts s just a software problem, but usually these questions are related either to the screen or GPU malfunction of the

    So until you can consider contacting ASP in your country for a verification of the material I recommend get the laptop to factory settings and check if the behavior still persists...

  • Tecra M3: black screen on startup, the vertical lines on the external monitor

    Hi all

    I searched a lot on the Internet for a solution to this specific problem, I have, but did not find a thread
    with exactly the same problem. I have a Toshiba Tecra M3 with Windows XP SP 3. Two weeks ago, I encountered problems with the commissioning. After a couple of times to restart it would work. Then it became worse... When I try to run I see no splash... the screen remains black. If I press the power button, I hear the fan and CD player but no screen. It is totally black. I know its working because I can go (blindly) in the installation program. Press end, and then press Y and enter. The computer will restart but still no screen.

    I plugged it to an external monitor. Pressing Fn and F5 allows switching. The external monitor shows different
    vertical lines in multiple colors. They change if I go to settings or you try to start windows.

    Does anyone have a solution to these problems?

    I have fear of solution can be given by the service only.
    In my view, this question must be tested properly.

    I can't say for sure, but to me that sounds like a technical question. Without testing you will know for sure what is the problem.
    Here on the forum we can only speculate why this happen.

    As you can see on notebooka? s LCD problem. On external it doesnâ? t properly work as well. It may be a faulty graphics card.
    Try to contact the nearest authorized Toshiba service and speak with the technician.

  • OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

    There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

    Hi gljatlaw,

    I see that you are having problems of quality of scan.  I'll take a look at the document below.

    Scan quality

    Let me know how it goes.

  • OfficeJet Pro L7780: Officejet Pro L7780 missing of the vertical lines on text &amp; photos

    Everything that I try to print has lack of vertical lines, text or photos. Happens if I print from my computer or if I try to copy a page directly to the printer. I went through the troubleshooting page full... the ink is all well heads, all good impression. Whenever I try to run a printer align it does not end the page. Whenever I have nothing he's trying to align printer print when its done & still cannot print the entire page. Gives me an error and says to check my documataion. I checked the book with my printer & there is nothing in this whole problem.

    Help, please!

    Hi @LockGal,

    Welcome to the Forums of HP Support!

    I see that you are having problems with your HP Officejet Pro L7780 printer aligning and printing vertical lines. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I understand the frustration that this must be for you. Looks like there are two separate issues. When the printer clean print heads and not properly align itself, this indicates that there is a problem with the cartridge, the print head or the line break. For vertical lines, it is usually independent for cartridges and print heads (not being is not a print quality problem). The paper type and print settings might be the problem.

    To help determine the cause have you used this document: troubleshoot print quality HP Officejet Pro L7500, L7600, and L7700 all-in-One Printer Series?

    Use the document in the order will help you determine if the print heads need to be replaced. If so, please contact HP.

    Please confirm that the vertical or horizontal lines?

    NOTE: are not replace the cartridges and printheads for vertical streaks in a print. Instead, check the paper as directed earlier in this document, or search for a document that addresses this issue. Vertical streaks on copies can often be fixed by cleaning the scanner glass.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.
    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on options contact HP - click Get phone number
    File number and phone number are displayed.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • What is the cause of the vertical lines of color on the monitor HP ZE4900 laptop o? S Windows XP

    I have colored vertical lines on the screen of the laptop monitor, but not on a second monitor connected to the VGA output port

    Ok thank you

  • Action/Script Photoshop to place the vertical line at the center of the Image

    How to create an action (or a script) in Photoshop that creates a vertical line in the center of the page?

    Here is an example of what I'm looking for.

    001-002.jpg

    First go to view > rulers, then right-click on the rule, and the percent change units.

    (so the action registers per cent and will work on different size documents)

    Then drag a vertical guide at the Center, drag one to the top of the image and the other down.

    (the goal is so the online tool is aligned with the top and down and you know where is the center of the document)

    For action, you can use the online tool and just save lines from the top of the image down along the center guide.

  • Tab indent to the letter / line up text to the vertical line

    Hello

    I would like to withdrawal or to align the words next to a horizontal line, as in the screenshot below.

    I am currently using a work around with two text boxes, but it's not ideal.

    test.jpg

    Is there a solution to this?

    Maybe a decimal tab might work - on the decimal tab the same position by assigning with all your selected lines. Then select each row in turn and set the character line up to then in your text ('F', 'P', etc.).

    You have to do it often?

    Scratch that - he works

  • MacBook Pro screen displays a blue screen with the vertical line

    Hi, I have a problem with my macbookpro. When I try to start, the gray screen load with the apple logo and then turn to blue screen with vertical crosshairs.

    It would be useful that you mentioned EXACT model/year of your MBP and the current OSX.

    Ciao.

  • Show the vertical lines on the Qosmio

    Suddenly vertical dark lines across display.

    I plugged it to an external monitor, no problem.

    This means that my screen is US or?

    First of all, it would be interesting to know what Qosmio model you have?

  • Remove the vertical line of old film stock

    Hello

    Im working on an old cowboy movie which was a deviation from the source of the tape.

    Photo here

    Adobe Creative Cloud

    Video here

    http://adobe.ly/1Pnvlto

    The line moves around the left side of the display market and a pain to the track and keyframe

    Ive tried this deletion using wire removal in AE but its pretty bulky

    I am looking for a 3rd party plug recommendations capable of eliminating this kind of things that we tend to run into this question quite frequently. Of course, other suggestions are greatly appreciated.

    TIA

    AE can't do anything automatically, you would need other tools for this.

    https://www.blackmagicdesign.com/products/DaVinciRevival/software

    http://www.thepixelfarm.co.UK/pfClean/

    http://www.HS-art.com/index.php/solutions/Diamant-film

    http://www.DigitalVision.TV/products/phoenix_film_restoration/

    http://www.mtifilm.com/DRS-Nova-overview/

Maybe you are looking for