HP 3055 A scan function will not work

Similar Questions

• Windows will start, the screen starts flashing and then the screen say Logging Off, then restore the screen to the CTRL ALT DEL all other functions will not work.

  Start my computer, it will default to the CTRL ALT DEL screen.  After graduating in the login screen I enter the password.  Windows will start and then the screen starts flashing and the screen say Logging Off, then restore the screen to the CTRL ALT DEL I can boot into safe mode.  All other functions will not work.

  Thank you

  I guess you wanted to ask how to solve the problem. If then all in Safe Mode you can use system restore to set up Windows to a point when the problem did not exist.

• For the years FF has worked perfectly with constant Contact. Now, the sevear in CC function will not work in FF browser - they work in all other browsers. Help

  Until a week ago, I had no difficulty or problems work permanent Contact all open in my Firefox browser. Now, I have several with certain functions in CC does not.

  Inserting images, links setting, background color change - these are three necessary functions I use in emails from constant Contact which will stop working at the opening of the CC in the Firefox browser - last updated was today 29/10/2013.

  The function works on Chrome and Internet Explorer browsers.
  I contacted the Support in permanent Contact and the issue is not through their program.

  Safe mode is a troubleshooting mode, it checks to see if Addons or bad prefs are the problem, if safe mode resolves, you will maybe uninstall some addons or reset firefox (bookmarks of Guard etc..)

  SEE: troubleshoot and diagnose problems of Firefox and Firefox Refresh - reset the parameters and modules

  Note the reset feature is NOT a complete reset, so backup information is optional (only the prefs, Addons and a few custom mods will be lost)

• HP 4500 Officejet Scan Setup will not work

  Previously, the HP Officejet 4500 wouldn't install, see http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-4500-Officejet-software-wont-instal...

  The software is finally installed, but now implementing the feature does not work. When I pressed a screen comes up showing the different settings, then I pressed scan settings, and it shows the various parameters of settings, however when I then tried to set up a function such as scanning front instead of the options panel buttons become available a screen with a picture just showing a scanner and a screen that stays for a while and then returned to the hand set up screen, none of the setting in place options for all functions of scan shop ever upward, however the service I tried to set up is now is more turned on and can no longer be in a hurry at all. I am able to do basic digitization with the old my old scanner software but would like to be able to use the options that come with the HP Officejet 4500.

  How to scan functions can be defined upward when this happens?

  Hi CommentToday,

  There is no configuration other than the installation of the printer software to scan a document. If you have the printer installed on your computer, then you should be able to open the solution Center and click on scan to open the scanning application or you can scan using Microsoft Paint.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Automatic enforcement functions will not work for DVD/CD

  Original title: why its worked?
   
  Sorry for the bad English - 1
  I had to try evrything difficulty autoplay in xp. Autofix.exe even. Autofix.exe just fix usb drive autoplay, but it cannot correct autoplay CD and DVD (I mean autorun.inf). I was trying every key "reg" but once again does not and I was try recovery console. I just did THIS:
  MD tmp
  copy c:\windows\system32\config\system c:\windows\tmp\system.bak
  copy c:\windows\system32\config\software c:\windows\tmp\software.bak
  Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
  copy c:\windows\system32\config\security c:\windows\tmp\security.bak
  copy c:\windows\system32\config\default c:\windows\tmp\default.bak
   
  AAAAAAnd his works
  And it is: Whay he worked?

  Hello

  1. what exactly you are trying to do?

  2. you are trying to disable the AutoPlay features?

  The command you provided is copy the registry values in the file that you create by using the command, where it is not related to AutoPlay functions.

  I suggest you to follow the article below:

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

  Reference:

  http://support.Microsoft.com/kb/967715

  I hope that helps!

• Re: Taskbar of function will not work on Windows 7

  Hello

  I've upgraded to Windows 7 from Vista, since that appear in the task bar I press FN low does ' t. I Qosmio G30

  Any help appreciated,

  Hello

  If you do a search of the forum, you will find number of threads dedicated to your problems. Go to the page of the Toshiba driver and download the utility of Vap and Flashcard support.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• YouTube functionality will not work continually, constantly stopping to recharge and play short stretches

  Whenever I have the clock on the You tube function, he played 4 seconds, then stops, charge and play another 4 seconds. No continuity.

  Hello

  1. is this issue occurs with any other website?
  2. were you able to access the site before without any problem?
  3. don't you make changes to the computer?
  4. you use Internet Explorer or third-party browser to access youtube?

  I suggest you check out the link if you use internet explore below
  Problems playing the videos by using Internet Explorer
  http://support.Microsoft.com/kb/2532294

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Search function does not work in a document, all the ideas of solution?

  Nice day

  I use Adobe Acrobat Reader DC 2015 Release Version 2015.008.20082 l. Within the program I asked for updates, and he says that it is current.

  The "Search/search" function does not work even when I clearly see the word I'm looking. Any ideas?

  Thank you

  Meredith

  Hi Meredith,

  Please confirm if you are using Acrobat or Reader?

  Search function will not work if it is a pdf document scanned in image format, you must apply OCR on this file by using Acrobat to be able to search for text in the document.

  Kind regards
  Rahul

• After you load an update, my reboot will not work. Again the sleep & Shutdown work. All other features still work.

  To run Windows XP.  I can't finish an update because the restart function will not work (be it at the end of the installation of the update) or the Start button

  Hi Beaver6,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. What happens when you try to restart the computer? You receive an error message?
  4. You have security software installed on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the above step failure may refer to the article and try the steps mentioned, check if it helps.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

• HP J4680C printers will not work with USB

  I have Vista Home Premium 32 bit and when I install my HP J4680C it does not recognize the USB connection... I can make copies with my printer, but that is where it stops.

  Printer print when I use a utility to test...

  1. Installed and reinstalled the printer with the original CD software
  2. Installed the s/w printer using the new HP file
  3. I used 2 HP utility without result.
  4. Used many USB cables and still it will not be printed

  My other PC (Acer) will print and no problem.

  I don't get any error codes.

  <2. was="" the="" printer="" working="" before="" on="" the="" same="">
  -Yes, he worked for about 9/15... The scan function has stopped working, which was when I decided to uninstall and reinstall the printer.
   
  System restore might work, restore the a date prior to the stoppage of the scan function.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  You the all-in-one printer, HP Officejet J4680 printer

  What is the exact error message?

  The error could be because you are installing on a previous installation.

  See that these links that they would be useful:

  Printer with a USB cable repeatedly tries to install in Windows Vista
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01902598&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3692888

  Other problems of Installation of Windows Vista
  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=24909&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3692888

• Telstra Australia tell me that I have to use Chrome, as their facilities will not work with Firefox. Why?

  After spending literally hours trying to pay an account on Telstra Australia (that I just joined them, so it's the first installment), I finally gave up and contacted directly. I was told that Telstra services will not work with Firefox and that their preferred system is Google Chrome but Internet Explorer will not work.
  I have used Firefox for a long time and I'm happy with the program. Specifically, I have everything set up to work with Firefox and do not want to change. At the same time, I want to have the convenience of paying bills online.
  Can I load up, Google say, just one thing, or the program will then try to "catch" other functions as well?

  Yes, you can install Chrome and use it for a website. "Recovery" Chrome as other functions on your PC, just don't let it not be defined as "browser default" If you are prompted during the installation procedure. In addition, I doubt if you'll have a problem.

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  modules common to xp... not on this model...

  added value for xp... not on this model...

  FN F6 and F7 for less bright and shiny LCD will not work with XP on A305-S6845

  C2D t8100, chipset intel, no normal fn keys FN + F5 doesn't seem to operate 'naturally', as do some others that I don't use, but the idea that I spent 8 hours to find all the xp drivers for this thing and can NOT dim my lcd...! ******ed...!!!

  The Toshiba REAL will raise your hand... Please?

  you KNOW millions are without downgrading from vista to xp, GIVE US THE DRIVERS...!

  I had to just to get the rest, scout intel boooted to viata while just to get the wifi, then start on xp, install the wifi, then had to get drivermax (amazing) to find all the drivers

  but no one knows where the FN drivers (no pun intended...)!

  None of the drivers Vista FN will get them to work with XP

  XP drivers for other models will not be installed on this model

  It comes from * ed

  1200 for a machine that cannot dim the lcd...!

  It is unlinke toshiba, how long could possibly take something for xp on to the A305 recompile!

  If someone has an A305 with c2d, get drivermax, they have now all other drivers of my job of paving 99.999% perfect...

  I will also publish on 4shared.com in a massive zip...

  Ok

  Send me a fix...!

  (too late for a refund...!)

  TOSHIBA! everything I own is TOSHIBA... !!! three laptops from toshiba... just give my xp for my A305 drivers...!

  If you come from the United States, I'm afraid, you're on the wrong place. Try to post the same thing on http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 it's US forum.

  Here are mostly from Europe and Toshiba Europe has nothing to do with Toshiba WE. The company, but may be different marketing strategy and support.
  Maybe you'll find people with the same opinion.

  > 1200 for a machine that cannot dim the lcd...!
  I take you seriously with your opinion, but after reading this, I think that this comment has nothing to do with reality. Recovery of installation image and you'll have the complete functionality for laptop. You have the stick of Windows Vista on your laptop?

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.