HP 3500 pro series: cannot install Pcie adapter

Similar Questions

• Cannot install ESXI 5.5 HP 3500 PRO series

  Dear all,

  Try to install ESXI on HP PRO 3500 MT series 5.5. Its gives me the following error.

  "NO network adapters have been detected.

  Can someone please help?

  Thank you
  Sriram Das A

  Im not saying there is a problem with your network adapter, its just ESXi does not have a suitable driver for it. IM assuming that you use Realtek RTL8171E gigabit ethernet (received this HP site). There was a blog post from Vladan Seget on how install driver 8169 vib. http://www.Vladan.fr/Realtek-8169-NICs-not-detected-under-ESXi-5-5/

  But once it comes to 8169. I'm not sure if there is a driver available for 8171 (8171and same 8169 is not in the list of VMware support)

• Satellite Pro L500 - cannot install the Realtek LAN driver

  Hi all

  I got a Satellite Pro L500 Windows 7 pro with disk created from computers, cell phones, but now cannot install a Realtek LAN driver for the laptop.

  The installation of the driver software program doesn't seem to work properly all the time, tried several times to install with only once a realtek 'repair' option becomes available.
  When I managed to install the driver I got an error "the device couldn't start. After restoring I also had problems with a "controller driver simple communication PCL.
  which seems to have been an Intel MEI according to the SAT, DEV info displayed in the information systems.

  If these problems are linked and how to install the driver required in an automated system if the system does not correctly detects hardware?

  Hello

  I m not owner of the Satellite Pro L500 but have you ever tried to install the latest driver Realtek LAN official site of Toshiba?

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Satellite Pro L300D: Cannot install because of the common Modules control utility

  Hi guys,.

  I'm new to this forum, but I spent two days looking around.
  I have a sat Pro L300D that I'm downgrading to XP, because many are, and I can't get the touchpad to work or function buttons.

  One problem seems to be to install the utility 'controls', which gives the message "common modules" not installed even though it was the first pilot, I have installed.

  Does anyone have any suggestions?

  OK, here we go.
  Toshiba pilot European page doesn't provide drivers XP ALL, tools or utilities for the Satellite Pro L300D.
  Is this good? I checked the page and there are no. XP applications.

  So I came to the conclusion that the common Modules cannot be installed because this software was not designed for this series of portable and therefore, you receive this error message.
  It is clear!

  So Don t wonder what impossible to install "utility controls" or common modules. These pieces of software are not compatible

• Satellite Pro A120 - cannot install recovery disc

  Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

  It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

  FYI, this is what happens after installing the hard drive:
  I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
  I insert the product recovery disc, put off and then again when you press F12.
  I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
  I then get RAMDISK image loading... which takes less than 2 minutes.
  I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
  I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

  Any ideas anyone?

  Thank you.

  Hi Lapitup,

  Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

  If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

  In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

• Satellite Pro L510 - cannot install and start Intel Link 5100

  Hello

  I have a Satellite Pro L510 (P / N:PSLFML - 002004). Recently, I upgraded my Intel WIFI Link 5100 (my original WLAN is Realtek RTL8191SE). I tried Windows 7 32-bit and 64-bit with intel driver, version 13.4 and 13.5, non of them worked so far. I always get this error 'this device cannot start' in Device Manager

  Can someone help me with this problem please?

  Duy

  Hello

  May I ask why you switched the WLAN card? Something was wrong with your old WLAN or why you did that?

  The WLAN feature was working before the upgrade?

  I can say with certainty why you get this message error, but to me it seems that the WLAN card is not activated, you permit wireless network adapter using the FN + F8 key combination?
  ?

• LaserJet MFP M125nw Pro: #2 cannot install LaserJet MFP M125nw Pro because of the error "the system cannot find the file specified."

  Hello

  I struggled in the last 2 days to install my new all in one Pro LaserJet MFP M125nw. I tried almost all the stuff Google and this community offered under the heading "the system cannot find specified file", without success. My frustration is huge because I'm not really a novice when it comes to solve similar problems.

  Here is what I do and what is happening:

  I downloaded the latest version of the complete software for XP HP offers through their Web site. I tried to install the drivers through the install wizzard, then manually (used for the files in the folder 7ZXXX in the directrory temp) but no matter what I do, I get the same error again and again. In fact XP recognizes the printer and the scanner, it installs even drivers for the scanner and it works but after maybe 50 attempts in different ways, XP couldn't install the printer driver.

  Here are a few screenshots:

  http://i.imgur.com/GuGmTP2.jpg

  http://i.imgur.com/OZyFuz0.jpg

  http://i.imgur.com/2O0J3aE.jpg

  http://i.imgur.com/exAy5RG.jpg

  It's the event viewer:

  Event type: error
  Event source: MsiInstaller
  Event category: no
  Event ID: 11721
  Date: 26.6.2015 г.
  Time: 18:47:40
  User: HPREDDY-79F942C14\Yasko
  Computer: YASKO-79F942C14
  Description:
  The description for the event (11721) in Source (MsiInstaller) ID is not found. The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: product: HP Support Solutions Framework - error 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterAclmControl, location: C:\Program Files\Hp\Common\AclmControl.exe, command: /unreg; (NULL); (NULL); (NULL); (NULL);.
  Data :
  0000: 7 b 46 43 33 43 32 42 37 {FC3C2B7
  0008: 37 36 38 30 30 34 7-6800-4 2d 2d
  0010: 38 43 36 41 31 35 44 8 C 6-A15D 2D
  0018: 2D 39 44 31 30 33 31 31 - 9 D 10311
  {0020: 33 30 43 31 36 7 Dec 30 16}

  =====================================================================================

  Event type: error
  Event source: app error
  Event category: no
  Event ID: 1000
  Date: 26.6.2015 г.
  Time: 18:56:14
  User: n/a
  Computer: YASKO-79F942C14
  Description:
  Failing application plugin - container.exe, version 38.0.5.5623, failed module mozalloc.dll, version 38.0.5.5623, address 0x00001aa1 failure.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data :
  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 70 6 c 75 plu ure
  0018: 67 69 6th 2d 63 6f 6 74 gin-cont
  0020: 61 69 6 65 2nd 72 65 78 ainer.ex
  0028: 65 20 33 38 2e 30 2e 35 e 38.0.5
  0030: 2nd 35 36 32 33 20 69 6th en.5623
  0038: 20 6 d 6f 7 a 61 6 c 6 c 6f mozallo
  0040: 63 2e 64 6 c 6 c 20 33 38 38 c.dll
  0048: 30 2nd 2nd 2nd 35 35 36 32.0.5.562
  0050: 33 20 61 74 6f 20 66 66 3-off
  0058: 73 65 74 20 30 30 30 30 put 0000
  0060: 31 61 61 31 0a 1aa1 0D...

  Found the solution. The problem was that I had Microsoft .net Framework 4. After that I went back to 3.5, the driver through the installation went perfectly. Thank you guys for the effort.

• Mac Pro 2009 cannot install or run six

  I have a Mac Pro 2010 to change my Mac Pro 2009 and I retrieve the hard drive of the 2010 2010 t and you are trying to install a new installation of Mac OS X, I can't. I want to install on the ssd, and I format the hard drive and ssd journal Mac to install the operating system. So the problem is when I get 2010 hard drive player, I can reach in disk recover and disk utility, but the Mac does not recognize the internet cable that connect to the Mac and confirm it is working because I use with him for another photo. In network utility I see some transfer of the Internet but when I click on reinstall os x is saying that I have no intenert connection or connect to the wifi (and I do not have wifi in my 2009) and I can not install the operating system.

  The second problem is that I do an El Capitan bootable on usb and when I try to boot from him I got than messenger error (including photo)

  Rudy problem I've tried is to take a hard drive of my 2010 work and try to start it in 2009 and I got the same error.

  maybe confused with the 2010 Mac? And maybe I need to make bootable hard drive or make disc hard 2009 only osx? Or my Mac in trouble? Please help me

  

  What is the message of panic full?

  I can't read the entire message

  How did you like the El Capitan bootable install media?

  Which version of OSX on the player of 2010 and you tried in 2009?

  How we made this OSX 2010 version? If from the installation disk supplied with the 2010 it may not work in 2009.

• MacBook Pro (2013) cannot install Windows 10

  So today, I'm trying to install windows on my MacBook Pro model 10 (2013). It is on the OS X EL Capitan and seems to be the latest version, there is no update in the app store of any kind. Then I started the installation process 10 windows by downloading a 64-bit version of Windows 10 ISO and then after the download I placed it on my desk. I then proceeded to bootcamp and unticked all options except 'create a later version or Windows 7 installation disk', because that's what I did there are 2 - ish years, when I installed windows 8, (but later uninstalled it due to problems of performance and overall, not like the software). I then continued by choosing my 32 gb lexar usb and my ISO image on the desktop and then received a message saying that Windows 7 or later version is only supported by bootcamp. I then went back and checked the first two options to download the latest software support for windows and always the same problem, also it does not seem that he downloaded anything.

  Any help would be appreciated.

  I think you should start with the documentation:

  

  Click the left button, open Boot Camp help.

  Create an ISO image for Windows installation media Boot Camp

  Use 10 Windows on your Mac with Boot Camp

  Boot Camp help

  How to install Windows using Boot Camp - Apple Support

  You may also have one of the following values after installing Windows Installer:

  • Boot Camp 5.1.5722 Support software
  • Boot Camp 5.1.5769 Support software

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• Re: Satellite Pro C50 - cannot install Windows 8

  Hello.

  I have a Toshiba Satellite Pro with Windows 7 preinstalled c50.

  It comes with 2 DVDs containing Windows 8.
  I tried to upgrade to Windows 8 (following the instructions included in the Manual: BIOS change, etc.), but I can´t install it.

  After booting from the DVD, it doesn´t appear the installer of Windows 8, Windows 7 recovery options.

  Could you please help me?

  Thanks in advance,

  Sergio

  Hello

  I assume that you have followed the solution step by step, as described in these documents:

  [Guide to upgrade Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03EJ0001R01.htm]

  [Update Installation of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03ER0000R01.htm]

  [Windows upgrade 8 - Notes and Restrictions: http://aps2.toshiba-tro.de/kb0/TSB2A03EL0000R02.htm]

• Satellite Pro A100 - cannot install display driver

  I am updating a Satellite Pro A100.
  I downloaded the update of the display driver but can't install it because it say its longer 88 charicters.

  Anyone has any ideas, tips or suggestions please?
  My goal is to alow the user to be able to play Sims 2 if it is possibe, because I know that some video cards do not support the game (or whatever it is).

  Hello

  I assume that you have downloaded the zip package.
  Rename the package for example in "display driver" and then uncompress the package.
  Then go to the folder where the driver was decompressed and then launch the installation.

  Can you do this?

• Satellite Pro A100 - cannot install audio driver

  Hello

  Hope someone can help, I can't get an audio driver to work, I tried some different drivers now and none seem not to work.

  I tried all the drivers on the Toshiba driver download site with no luck. I always left with a yellow question mark in Device Manager. (Satellite Pro 100) During installation, the window I have instull MICROSOFT BUS DRIVER BEFORE this r audio (Realtek HDA for XP).

  Where can I get this driver (Appreicate if someone could point me in the right direction), or can someone give me another piece of useful advice?

  Appreciate any help

  Thank you.

  I think that this is a known issue.

  Sometimes it s useful to search the Microsoft Knowledge Base. There, I found these interesting documents:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  It is very important to install these patches before you install the driver.

• Satellite Pro A10 - cannot install Intel graphic driver

  Hello

  I m wondering I ve been on the Intel site to get the disc for my graphics card that Toshibas is old Intel have a 1 latest release for my view controller and when I download and try to install it, it says cannot continue please contact the manufacturer of your computer.
  Can you help me please because there must be a way to get it?
  Thank you

  Hello

  As a general rule, you should always use the Toshiba drivers because they are specially designed for these graphics cards.

  Good bye

• Cannot install Wireless Adapter (card NETWORK or USB key) to the Pavilion p6340a Win 7 Home Prem

  I removed a work card TP-Link to a Pavilion a1300a XP Home PC network to put in my Pavilion p6340a Win 7 (64-bit) Home Prem PC.

  Download and install the current drivers of TP-Link.
  Installed everything well and the adapter can be seen in sub "Change adapter settings" in network and sharing Center and shows as working properly in Device Manager, but it is not recognized as a network within the network and sharing Center.

  Under "Manage wireless networks'" nothing appears, if I then click on Add"then manually create network profile" "I then get an informative message '" an unexpected error occurred'. "

  Suspect a problem with the NETWORK card, I uninstalled it and its drivers and tried to install a USB wireless adapter with the same exact result and the error message. It seems that there must be an OS problem or something stopping the wireless to work. USB adapter both NIC work properly when installed on the former Pavilion a1300a XP Home PC. NETWORK card and USB adapter are the current drivers for Win7.

  All the ideas it driving me crazy. A simple 5 minutes on any other PC task turned into many.many hours without solution.

  After many hours of uninstall re install & try everything under the Sun in many forums, I finally found a solution. Despite trying with firewall disabled at different times was the final fix

  1. Uninstall NETWORK card and USB drivers and devices.
  2. Then uninstall the AntiVirus (in this case AVG Internet Security)
  3. Reinstall the NETWORK card and drivers
  4. Reinstall AntiVirus

  Tried the USB adapter as well so that the antivirus has been uninstalled and installed no. with problems.

  Everything works very well.