HP 3845 printer power light flashes

Power light of my printer keeps flashing and I can't print anything. I ran the HP software troubleshooting, reloaded drivers, turned off and restarted, fired cartridges and checked for jams. NO JOY. Can I get a test page to go to Quebec, but it will not be printed. This all started when I tried to print a form the net. Has not worked since,

Hey Mics.

Thanks for the update.  The Deskjet 3845 is a printer function and I have all the information to reset on this model.  If power cycling the printer, uninstall/reinstall, etc. have been unable to solve the problem, it seems to be a hardware problem with a sensor in this printer.

I recommend a quick test if you have availability.  You have another computer, you can try to connect this printer?  It is possible that the question is one of the queue stuck in this PC information and not a problem with the printer.  If you connect the printer to a different PC and you have the same result, so I suggest looking into replacing the product.

Contact HP worldwide | HP

Hope this helps,

Jason

Tags: HP Printers

Similar Questions

  • Satellite 2805-S201: AC power light flashes orange 8 times

    Hello

    I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
    After that, the AC power light flashes orange 8 times and recycle.

    It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

    Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
    No, the PCMCIA card is not always connected

    Any thoughts?

    CA

    Hello

    The flashing provides a micro code which refers to the hardware failure.
    But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
    But it is of course, in most cases, it s a hardware problem of motherboard! ;(

    Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.

  • Qosmio F20 won't start - power light flashes orange

    My Qosmio F20-149 crashed yesterday and I was not able to get it working again. When I try to turn it on, the power light flashes on and outside (on: 1 sec, off: 1 sec) and the cooler fan operates at full power. When I press a key, there is a genre or a sound error. otherwise no reaction of the laptop; even the CD player does not open.

    I did no RAM-implementation to date, and I use the original power supply Toshiba. I tried from the laptop using only the battery, only power and on both. No change in the reaction. I tried all possible combinations (with a free one, both... etc) of my two cards, RAM (512 + 512) and still no use.

    I am really puzzled.

    If I understand you just your laptop sends a blink code. Copy the following code appears so laptop has detected a problem with the electronic power supply.
    In this case, there is nothing that you can do and the laptop must be sent to the service provider allowed the closest.

    They have manuals containing instructions and the exact description of the code how do I solve this problem.
    Sorry, buddy, but I do not think that anyone here can offer an accurate diagnosis for that matter.

  • power light flashing wn3050rp

    I have a wn3050rp extension

    its power LED flashes all the time

    I installed by mistake inside wn3000rp firmware

    and since then, its power light flashes

    Help, please

    http://KB.NETGEAR.com/app/answers/detail/A_ID/22688

    see this

    It will help you

  • Lenovo B590 Orange laptop power light flashing

    Hello

    Recently, I noticed that my B590 Lenovo laptop indicator light was flashing orange. I tried to restart the notebook and by ensuring that all the plugs are secure, but nothing is indeed it. That means the power light flashes average orange?

    ~ Laila

    Hello

    Just wanted to give an update on this issue, in case someone else runs into a similar situation. As I said, I'm under market entirely adapter. I found that the old ground had not been eradicated because if you go out without replacing, it leaves a gaping hole in your laptop!

    I solved the problem of blinky light orange by disconnecting the battery, but leaving so much, with little electrical tape, to hold it in place that it will protect the pins bit inside battery - thanks for the link to the manual, it is also useful.

    Mahalo,

    ~ Laila

  • KDL-46XBR9 shuts off and the power light flashes red

    KDL-46XBR9 shuts off and the power light flashes red

    It flashes ten times, then rehearsals.

  • Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

    My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

    * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

    Hello

    If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

    If it is under warranty, contact a local reputable computer repair workshop

  • HP dv7-3085dx power light flashes, but the laptop does not work.

    Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

    Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

    I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

    Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

    I just want to now what is the flashing light means light? Why it does not work with the new cable?

    Thanks in advance! Sorry for my bad English...

    Emilio.

    It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

    If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

  • HP Deskjet 3515: My printer power light is FLASHING and printer will not be on

    I bought a HP Deskjet 3515 October 2013. It was working fine until a day back, I noticed the following: -.

    1. when I connect printer adapter led on the power adapter turns OFF green. When I unplug the printer, the Green led on the power supply turns ON.

    2. when everything is connected to the printer power button just FLASHES. No other does blink.

    3. the printer lights. Only the Power button continues to blink without.

    Hi @HP71013,

    I see that you are having feeding problems. I want to help you.

    Looks like the power cable or the power adapter, the origin of this problem.

    Please, try the procedure described in this document to see if it will help to solve this problem.

    HP printers - HP printer does not turn on or respond when the power button is pressed.

    If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

    If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

  • power light flashing hp deskjet 3940, & do not print anything

    I have windows XP(SP3) on my laptop and HP printer Deskjet 3940. The printer worked fine until now. Now the power light blinks on the printer. There is NO paper jam.
    I uninstalled and reinstalled the driver from HP website. The printer showed ready in the control panel,but as soon as i try to print a document it shows offline and the power light starts blinking. I have cleared documents from the print queue.
    I have tried using different USB ports but no success.
    I have ensured that 'use printer offline" is unchecked.
    I also downloaded and ran HP Print and Scan doctor. It says everything is fine and asked me to print a test page, but nothing happened when I tried to print. Print HP EXPERTS, Please Help! Thank you!
    

    Hi HPuserSJ,

    I just wanted to check to see if the documents of resolution of problems you have been useful.

  • HP PSC 1510 all in one printer power button flashing key.

    The power button flashes. No other lights are on.  I can not turn off the printer.

    Hello Laureldawn,

    I see this is your first visit with us here on the Forums of HP. Please, let me take a moment to say 'Welcome. '

    I have some suggestions that we can try when troubleshooting flashing lights on the printer.

    First of all, please make sure that you have the printer power cable connected directly to a wall outlet and NOT a bar/power strip.

    Here is a document that uses a LaserJet printer for example, but it is intended to be used by HP products in general.  This document explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

    Another step we can try is the document the Treaty of lights flash.

    Please let me know whether or not these measures have helped.

    If I don't hear from you today, I hope you have a great Wednesday.

    See you soon,.

  • Power light flashes

    I have a late 2009 Mac Pro, that will not start and the power LED flashes continuously. I tried all the different buttons start without success.  Any suggestions?

    This error code means that there is not enough RAM to work.

    When yo get that open the side cover and search lights lit by strips of RAM

  • 32D1334B LCD TV - not light power light flashes red & Green

    I have a Toshiba 32D1334B LCD TV, it used to work perfectly well and then all of a sudden, it will not activate.
    When I plug in the TV, the power automatically light flashes red and green permanently. There is no way to turn on the TV; the screen remains black.

    I had to take off the back, watched and deleted all the parts, but can not see the obvious problems. I also a multimeter and power to the various sections of the TV is, but that's as far as my electrical knowledge goes!

    I don't really know what else to try, but I am very reluctant to throw away the TV that I know it's probably a unique piece that needs to be replaced to fix it. I searched online and others have reported the same problem exactly, but it had not resolved there always. Unfortunately, TV is more under warranty... If anyone has any suggestions or can provide any help, then it would be greatly appreciated!

    Thanks in advance.

    If you find out how to fix it please let me know because my tv is the same.chris

  • Portege M750 starts no-power light flashes

    I have an orange flash on my power light error code (1 long flash 3 short 1 long 2 short 1 long 1 short)...

    I have to take the power connector on battery and start battery to operate...

    I use image windows 7 Toshiba with all Microsoft updates (now I NEED many to verying reasons so don't grill me again... for example DON 'T SUPPORT MICROSOFT UPDATES blah blah blah)

    What does this code mean and y at - it a Bios Beta above version 3 for these things...

    Any helpful comments would be greatly appreciated...

    Hello

    In short, 0, long ways 1.
    In your case, the binary code is 1000 1001
    Now, we must reverse the binary code because the most significant bit.
    This means that the code is; 1001 0001
    The HEXADECIMAL code means; 91 h

    Error code is 91 h but I n t know what that 91 h means and what role might be affected exactly!

    Eventually it s something wrong with electronic power supply on the motherboard, but only the ASP technician could provide more details
    However, in most cases, the motherboard is affected and needs to be replaced.

    Welcome them

  • Portege Z830-10F no display - power light flashes

    Hello

    I have a problem, when Toshiba Portege Z830-10F of loading, the screen is off, flashes of light of energy Green two times two times yellow and repeated, the screen will not turn on.
    What it means?

    (PC was left alone in the night on table)
    I try to disconnect the battery and load without it, it did not help.

    Indicator DC IN (first on the left):
    Flashing orange indicates a problem with the power supply, initially, you should try plugging the adapter into a different power outlet. If she does still not work, please contact Toshiba support in your country.

    ((Deuxieme power light to the left):
    Flashing orange indicates that the computer is in mode 'sleep' and that there is enough available power (mains or battery adapter) to maintain this State. In sleep mode indicator lights for a second and off for two seconds.

    Also try this.
    Remove the battery, disconnect the adapter, press and hold the power button / stop along 30 sec.
    Now connect the battery and AC adapter and turn on the device.

Maybe you are looking for