HP 430

Similar Questions

• HP Probook 430 G3: Driver multimedia Audio Controller

  Please help me find the audio driver HP 430 3 VEN_8086 & DEV_9D70

  Thank you.

  Hello

  The only solution I've seen this must first boot into the Bios menu, disable Intel Smart Sound, save the changes and exit the bios.

  When windows is loaded, open the Device Manager, right click on the device problem and select uninstall.  Once it finished, look for changes on the hardware.

  Kind regards

  DP - K

• ProBook 430 G3: Pleasure of the laptop cooling accelerates the low speeds constantly

  Hello

  I have a brand new HP Probook G3 of 430 who works and do everything just great, the only problem is his strange cooling fan noise.

  The problem is that it accelerates and accelerates downwards constantly without visible reason. (Please note that this is not normal behavior when coolers change from higher temperature of the processor speed). The interval between the top speed down is less than a second and it is constant. So imagine when cooler works on higher speed, it is not smooth, as it is supposed to be, but little wave / floating.

  I'm not sure with speeds laptos fans run, but if view the problem it will look something like shown below

  

  Action taken:

  • Updated the BIOS to the latest version - did not help.
  • Start the 'Fan always on AC Power while' - sounds even.

  Can anyone suggest anything to diagnose the problem of fan? Mayble there's some fan diagnostincs tools or anything else that can help.

  Thanks in advance for your suggestions.

  I will say that it is a hardware problem with the fan itself. You could try and blow with compressed air. There may be a clog of dust or something that is causing do drag, dislodge, then reclogging. Or the fan may be faulty.

  I would like to make a warranty case or if you can return it for a replacement that would be a good idea, too. The Probooks are fairly easy to work, and it's possible hP might just send you a new fan but I doubt little.

• which driver to download for my hp probook 430 g1?

  which driver for wireless download for my hp probook 430 g1? in support, there are a lot of what I can download?

  I have a mediatek mt7630e

  Hello

  Yes, you are right, you said. I'm sorry for the lack.

  I see that there are two versions of the driver that can be used for your card Mediatek and it's the most recent:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5379212 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_122653_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  MediaTek and Ralink companies are now one after their merger.

  Please support me by clicking on the star of congratulations, if you like my post and "Accept as Solution" if my advice were answered or helped your situation. What are the best ways in which you can thank me.

  I am an employee of HP.

• HP ProBook 430 G3: USB recovery enough?

  Hello!

  I have a HP ProBook 430 G3 with Windows 7. I think install Ubuntu LTS 16.04 and wipe the drive completely in the process, including the recovery partition. If I for some reason any later wanting to 'factory reset' laptop / reinstall Windows 7, a USB key with recovery media will be sufficient to insert and boot from?

  My thoughts are to use "Create recovery media" in "HP Recovery Manager' to create the USB said. Is it enough to get the laptop to factory condition?

  Any help is appreciated!

  Hello:

  Yes, it's normal procedure to recover the PC when there is no recovery partition, or you replace the hard drive.

  You can also order HP recovery media if the recovery USB disk that you create does not work.

  In the USA/Canada the number to dial is: 1-800-334-5144.

  Have the serial number of the PC handy to give to the customer service rep.

  If your laptop is still under warranty, HP can send you free of charge for you recovery disks, then you can just see if you can order a set for free while you can.

• ProBook 430 G2: Cannot dowload for Probook 430 G2 drivers

  Hello

  I try to download the drivers for my HP Probook 430 G2 in recent days, as two fingers on the trackpad scrolling does not work. However, Web sites with drivers are not available. For example, http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943803 does not work.

  Any help would be appreciated.

  Best, Marjolein

  marjoleinf

  I just tried this link to HP Web site and it works.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• ProBook 430 G2, touchpad pointer freezes randomly

  Product: Probook 430 G2

  System: WIN7 pro. 64 bit
  
  Dear HP
  
  I bought a probook 2 weeks ago and the touchpad randomly freeze when I use my laptop
  
  I tried the synaptics driver version 17.0.18.8, 18.1.8.1 and 18.1.15, all versions have the same problem
  
  Sometimes the cursor freeze, sometimes the cursor moving around and out of control
  
  Sometimes the touchpad detect I multitouch even when I'm only using one finger

  is it possible a HW fault? or just a driver problem?

  any suggestion to solve this problem?

  Thank you

  Looks like a hardware problem, but you can try to use the touchpad in safe mode (to enter use key F8 safe mode) and check if it works fine, if you encounter the same problem in safe mode then it's a hardware problem and in this case I suggest you get the machine.

  Click on "Bravo Star" icon on the left side so resolute.

  I am an employee of HP, but the comments in this forum is of myself and is not HP

• Laptop HP 430: I can update/modify/update my disk driver or adapter and processor to display in my laptop HP 430

  Can I update/change/update my disk driver or adapter and laptop display in my HP 430 PC processor? If Yes, can you tell me where? If I need to go to the service center near our location for the upgrade or update. And what is it. Thankyouuu in advance for the answers

• Intermittent outages Desktop HP Pavilion p6510f - 25 Antec 430 WATT power & NVIDIA GEFORCE GTX 650

  After installing a video card and a new PSU (Antec 25 430 WATT power & NVIDIA GEFORCE GTX 650), my system has become unstable.  It worked fine for the first 3-4 hours, then had a BSOD (blue screen of death) with kernel_data_inpage_error 0000007 a and later a 000000F4 of critical failure of the process.  I did all the tests mentioned on this page but also removed and replaced the cmos battery:

  * 1137.html http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-

  All the tests passed and no problems have been found, and yet the system still does not work after 3-4 hours of use.

  So, I removed from my system and restored to its original settings.  He seems to be back to normal now (but we'll see how long).

  This experience has demoralized me.  This is because I heard other people having difficulties trying to upgrade their systems.  Looks like he has about a 50% success rate, unless you know what works from past experiences.  I think that the only way to get a system that now has good graphics is a well tested game box (PS3, XBOX or Wii).  Are there any recommended or possibly well tested configurations for this type of system that could give me the quality of a GEFORCE GTX 650 without result in a blue screen or instability for my computer?

  Because this computer comes with ATI and AMD parts, I guess that maybe to get an ATI or AMD graphics card would work?  Whatever the graphics card, the 250W power that comes with this system would probably need to be replaced.  Are there any power supplys that recommend or possibly tested?

  I realize there are a few questions in this post, but I have a more.  Is there any motherboard of analytical tools to enusre that nothing went wrong with the motherboard?  When the blue screens are produced that it seemed to make strange noises from the drive as he stole it and after the reboot it would sometimes fail to recognize the existence of the hard drive as well.  Given that all the hard drive passed (I also ran SeaTools), which leads me to believe that power is great, but I fear now that if I upgrade the power it will only cause more problems.

  A paying, customer

  Zintage

  The machine was only 2 years old.  It of a shame that it worked so well for so long and then brought by a poor diet.  It is a 750 GB Seagate Barracuda hard drive.

  I went back to the power supply and the video card, cut my losses and buy a 1 TB drive.  I cloned the old disk (on fortunately he was still working) and left on for more than 24 hours.  The system is now on his feet and works as it should.  Who will be last and only attempt to upgrade.

• HP Probook 430 window 8 guard dropped the wireless internet.

  HP Probook 430 E5G98PA appears in the driver database yet.

  Bought a few weeks ago. I tried: turning off power management control, turn off bluetooth and updated the Broadcom driver via the tab of the device driver. (Do not download HP because does not recognize HP probook 430 or the model E5G98PA). He worked for me this time in Germany where he falls the internet every few minutes while the computer beside it works very well. What should I try next?

  Hello

  Try to get the driver fron here and also to run a BIOS update

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?sp4ts.Oid=5379212 & AC.admitted = 1379673345783.876444892.199480143

• I need to scan images to my MacBook Air to an Epson NX-430. What program I need to open on my computer.

  I need to scan to my MacBook Air images. I have a printer Epson NX-430/scanner, what program should I use to copy & how should I proceed? Thank you!

  Go to System Preferences > Printers & Scanners.

  Click on your Epson printer in the left column.  Click 'Scan' on top.

  I have a different Epson, but hopefully you'll see something like this:

  

  Click on "Open Scanner..." "and you're on your way.

• HP ProBook 430 G3: HP ProBook 430 G3 and Broadband Mobile HP hs3110

  My laptop is a "HP ProBook 430 G3' (number of product V0R47EC).
  It has a SSD drive in location M2.
  Can I install the module "hs3110 HP Mobile Broadband"?
  In what location?

  Thanks and greetings
  Yorgos.

  Hello

  It's true, and I should also add: WWAN may not work properly for the SSD.

  Kind regards.

• NVIDIA GeForce 6150SE nForce 430 code 19 error

  Hello

  I am running Windows Vista Home Premium 32-bit and have encountered a problem with the graphics drive. There is an exclamation mark next to the NVIDIA GeForce 6150SE nForce 430 in the graphics card and the error message is "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  It is up to date and there is no driver to restore. I uninstalled it and upon restarting, Windows successfully installed the driver, but the exclamation mark is still there. It has been suggested that I choose option 2 here to search for the drivers and Graphics Driver 280.26 has been found to install, but it made no difference. I don't know if it's important that I tried to uninstall it once before and selected the 'remove the software for the device option', but who do not select the second time.

  When I select 'check for solutions' in Device Manager there are two long files that describe the error. I downloaded here and here.

  The only problems is originally so far (or at least I suppose is caused by this because it happened at the same time) is that I can't select 1440 x 900 for a resolution of the screen so my screen is off, and I can put my computer in mode 'sleep'. Sleep is grayed out in the options. Any help is very appreciated. Thank you!

  

  So, after two weeks of multiple uninstalls, reinstall, install clean, destruction of registry, driver, using different drivers sweepers, spend time with the customer of NVIDIA and passing by each troubleshoot I could Google, I removed the HP Portrait display 1.4 update and now all is well. That had been installed AFTER that I started having the problem with NVIDIA so I guess it started as a small bug (the driver for my mouse also stopped working at the same time as the graphics card, but that was a simple fix) that the HP update is impossible to fix.

  Thanks for your help, Paul!

• ProBook G2 430: Compatible battery for HP Probook G2 430

  Hello

  I have the G2 430 HP probook with battery 4 cells. The battery life is little more than 2 hours. I am looking for a compatible with battery backup battery more (9 or 12 cells cell). What HP battery with higher backup is compatible with this model of laptop computer?

  Concerning

  Jousset

  Only one battery is specified for this model:

  (18) to the Li - ion 745662-001 battery

  No way to add a second battery, so there is no optical drive Bay either.

  This is a list of all options of battery for the HP business laptops and there is nothing extra for your model.

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA6-2583ENW.PDF

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite Pro 430 CDT - boot disk problems

  I have a toshiba satellite pro 430 cdt which I am trying to re - install windows 95 (I have win 95 on cd) on with no luck at the moment.

  I downloaded the two files from bootdisk from www.bootdisk.com, win95a and win95b, but have neither the right cd rom driver, so then I got put www.driverguide.com driver this driver on startup disk and change the config file to use the correct driver and I always get the message that no driver for cd rom drive was found.

  I don't know if the cd rom drive no longer works, even if the green light on the side flashes when you eject the disc that told me that things seem ok (maybe wrong here however). I have the cd rom plugged into the Bay on the right side of the machine (internal) and drive in the caddy it is connected on the left side of the machine (external) and even if I swap them on the cd rom drive does not work but the floppy drive works in two ways. If the connector edge on the cd rom drive doesn't work properly or the drive itself is shot.

  If I remember correctly when the boot disk works correctly it should give you 3 or 4 options (don't remember that it was a long time ago I finally did, and I did not work boot disc, DOH!), which one should be something like, "install windows with the cd rom support" or something like that.

  Once I get this I am ok I have win 95 on cd, and it is quite simple installation there from there that I built a few pc and installed different versions of windows with no true front hassels.

  Did he have the same machine as me (uk version) and able to compress all the files on a boot floppy from win 95 work and e-mail it to me?

  Or just files autoexec.bat and config.sys are all I really need (as long as they work those). Anyone know anywhere I can get my hands on one set of diskettes originally supplied with the machine that I seem to have lost mine, I think there were two or three players but no windows cd, I bought my copy (legit) from a computer fair years.

  Will provide you with my e-mail address later if necessary.

  Thanx

  Steve Jones

  Hi Steve

  I found the information that the device was shipped with 10 x player XM - 1502-B.

  Check this box:
  http://www.cdrom-drivers.com/companies/1066.htm

  There you can find a lot of drivers for different units. But maybe it's something wrong with the occupation of s PIN. In addition, you can ask the service partner for advice.

  Good bye

• Win7 and nVidia 6150SE 430 motherboard

  Are they really compatible? When I run video games like Civ 3 or 4 the processor starts to run high and the fan runs at full speed as the machine is about to take off ;-). The games can be run in full screen mode and even with a window frame and the animation set as low as possible, the set of parameters 'Global' or low nVidia, I still I have this problem.

  I downloaded updates (280) recommended driver from nVidia for compatibility and problems with the windows leaving 'trail' when they were displaced the other. This seems to be a question of resources.

  Can I solve this problem with a separate graphics card? And if yes how heavy duty a card can the system handle?

  Yes, Windows 7 and Nvidia 6150SE/430 chipset are compatible. Probably you are in need of a discrete graphics card to offload processing card video system. If your system has slot PCIe x 16, almost any PCIe x 16 graphics card should work your power suplly provided is large enough to power the new card.

  You don't mention what HP/Compaq computer, you have, so we can only speculate about the extension and power connectors that has your computer. Please provide your number of HP/Compaq exact model or product number for more specific help with your question.

  Frank