HP 4500 Envy: do not text print

Similar Questions

• Envy 4500: HP 4500 envy does not print with Windows 10

  The printer is ready with no document in the queue.  When I press print, the printer n/t print and indicates that there is an error in the queue screen.

  Take a look at step 2 in this link.

• Envy 4500: Envy very slow to print 4500

  I have a craving for 4500 and it takes several minutes to print a single page.  The status bar indicates it is connected to the computer and the bar moves that printing takes place, but it's really slow!  Any suggestions?  I have a Macbook with OS X Yosemite.

  Welcome to the HP community @tsuzannenc,

  I've read about problems you encounter with your printing is slow, when printing from your Mac running 10.10, and I wanted to tender hand to try to help outs! Before you begin, try to make a copy or two in front of your desire to 4500. If copies are too slow, try a reset of the power and try to reproduce again. If the copies to work correctly, go to the procedure below.

  Reset the power supply:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please, try the following steps in the order and try to print again to edit text.

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click here to download and install the complete driver: HP ENVY 4500 series full feature software and drivers
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  Good luck!

• Do not text printing or PDFing. Not printable is not applied. Help?

  I have a logo. The Summit is on a requested access to an oval path. Even with the bottom. In the middle is an ampersand (&). When I try to print, only the ampersand prints. I tried printing on 2 different machines. I also tried to save as a PDF, but I lost everything except the ampersand in the middle. Everything is black, there is no current weird colors. Not printable is not applied to anything. Any thoughts? I can send the file to someone, if they want to check it out.

  ID CS 3

  Thank you

  Chris

  Sorry for the delay. Spent some time looking for the police because I'm on Windows.

  I opened it first in CS5, and after the font substitution it exports very well, so I thought maybe it was a problem of police on your end, but just to be sure I opened it in CS3 to check. Same problem here you have on your end.

  Good news, though. I exported to .inx and open that. This page is open to 11 inches high, which can make part of the problem, but after resizing, it has exported correctly. It is a very good inidcator of minor corruption which is fixable by export. See remove minor corruption by exporting

• HP envy 4500 series: series like 4500 hp does not print

  printer prints test pages simply awesome.

  When I try to print, page comes out blank?

  Help, please

  Thank you

  John

  Hi @jsk4224,

  Thanks for joining the Forum from HP Support for a solution to your printing problem.

  I understand that you use a HP ENVY 4500 e-all-in-one printer with a Chromebook and and print pages of test very well but work sent from the Chromebook fate in white. I would like to help with that.

  Here is a support document which can help with this question - printer prints blank Page or fact not printing black or color ink.

  Please let me know if that solves the problem, or if you need assistance.

• HP printer Envy 4500 does not share print and else, says paper jam

  Just bought HP Envy printer 4500 which is supposed to print on both sides.  I put a copy of a document of two faces in the place where the document is supposed to copy.  I put the function copy, black ink, 2 Facer.     Then, I pressed 'start' and a copy out of feeder.  When I pressed on the two long side once again I get the message 'paper jammed' I called HP and Best Buy and nobody can help you.  HP support says paper I use is the cause.   Excuse me, but this is a multipurpose with 96 bright paper, 20 lb.   Best Buy tech told the paper or the paper type has nothing to do with anything.    I wanted to only two printed sides to save paper, but I can't live without this feature.

  But, for the record, I learned the machine is faulty by Best Buy and return.   I don't think it's paper or defective.   What do I do and where can I find the explicit directions to copy both sides of the paper.  No computer!

  Hello

  The procedure:

  • Press copy,
  • Touch 2 faces
  • Touch black or color

  Now the printer says «face...» "It will copy the first page, do not remove paper.

  • Turn the paper on to the second page (or put the second page on the glass).
  • Press ok

  It will copy the second page.

  Kind regards.

• 4500 envy: Envy 4500 will not be printed on photo paper

  I have a 4500 Envy will be printed on plain paper but as soon as I load photo paper it will not print on it.  I tried different manufacturing of paper and he'll come, but then just smears on the back with nothing on thr front while others, he just tells me to load paper.

  Hi @JimMackie,

  Please try these steps and getting back to me.

  Because the printer does not have the paper, I would recommend to try the steps listed in the document below. You can start to "Solution 2: adjust paper settings in the print driver.

  A Message appears "Out of paper" for HP ENVY 4500 and Deskjet Ink Advantage 3540 e - all-in - One Printer Series "

  If you arrive at "Solution 4: service of the printer", then I would recommend contact you HP.

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HP 4500 Envy: "HP Envy 4500' prayer or do not feel

  Hello, I had a recurring problem with my HP Envy 4500 while trying to print double-sided PDF files. When I print the PDF with Adobe Reader, it seems to print fine, but later I realize that certain lines were left while the rest of the text printed fine. I am printing the child math book, and because it seemed that the page was printed very well but I knew that more late missing things in the page (after that I had already paid to have the spiral it all related )

  Switch to Mac preview to print the PDF, I don't have the problem of the lines being omitted, BUT usually only about half of the document will be printed before you cancel itself, or starts printing the wobbly pages. For example, last night I printed 100 pages double sided very well and then it suddenly cancelled work. When I sent it to print again, it would do only a few pages (refused to double-sided more) and they all had this Burgundy/green/purple bar at the top.

  

  I turned it all off last night, came back this morning and it does the same thing. I installed the new ink, downloaded the latest drivers, updated all the software, restart the computer, and it always does. This happened to me before and for some reason it will stop eventually and print what I want, but in the meantime I'm wasting a LOT of paper, a lot of ink and a lot of money because I pay on the instant the ink program page. It's extremely frustrating. Any suggestions?

  Have you installed the HP software from a disk or download it (look in your Applications folder)?

  If so, uninstall it.

  Then download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now, reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• 4500 envy: how to print in black or grey only

  It does not show under options

  Go to the devices folder and printers, right click on the 4500 Envy, select Printing Options, paper/quality, advanced, Options of the Document, print grayscale, black of ink only, OK, apply.

  

• 4500 ENVY: ENVY 4500 printer stop printing after a few pages.

  If I printed only 1 or 2 pages, it works fine for my printer. But if I print more, he may stop printing in the middle of the process and on my laptop says "Error on HP ENVY 4500 (network) printing" but nothing else.

  I tried to use the HP print and scan doctor software but it does not solve the problem and has not detected and errors

  Hey @saycheese,

  I understand that you get the "error printing" message when you print multiple pages of your computer Windows 8.1 documents to your HP ENVY 4500 e-all-in-one printer. I would like to help you today with this printing problem. Right now, it sounds like a conflict of WSD Port (network) takes place within your computer Windows 8.1. Therefore, at the beginning troubleshooting I'll have you run a patch to correct this problem. Please follow the steps below.

  Microsoft has released a hotfix to correct printing problems in Windows 8.1 operating system. Printing problems seem to affect printers on a network, regardless of the brand or model, and there is a conflict with the WSD Port network Windows 8.1. Please click here to download and run a Microsoft Fix it Tool. "Once the site opens for the fix, please click on the button 'available hotfix download". Please follow the prompts on the screen to install the hotfix. Once the fix has been loaded please try again to print a multi-page document.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP 4500 g510n: My 4500 g510n not to print or copy

  About 2 weeks ago I tried to copy with my 4500 g510n.  Fed in the book, he stopped near 95% through. Then the suele just sitting there copying intermittently at me. No noise, no copy.  After 5 minutes, I tried to cancel, and it hung on the cancellation of the copy. A minute later, he adorned him stop.  I puleld out the power cord and replaced it. Decides scanning and printing. However, my grpahics program is more able to find the scanner.  So I used the HP on the WIin10 64-bit Start Menu Solution Center.  Worked very well there.

  Print however, repeats the same process (this timr print intermittently at me). After pressing another outlet, it worked, but print very slowly.

  Today, I tried to print, and still the same problem exactly. It feeds the paper almost and then sitting there, feeling intermittently at me.  Pull the seizure of power, has waited half a minute and he fine pritned. Tried to print again, same problem. This time, however, the problem has taken up after removing the CAP. Tried pulling the plug again. He said it is a paper (in reality, not one) jam, then actually appeared a paper jam on the attraction of making funds. Two card pulls later, it is printed.  Now here's the weird part. After that each shot Cap reset paper is introduced into the printer without problem.  With the exception of the one created the paper jam. Otherwie, if perfectly well nourished.

  I use wireless to a Dell Inspiron, located within a few feet of the pritner. Win 10 64-bit.

  Hi @Atherworld,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you use a HP Officejet 4500 Wireless all-in-One printer with a Windows 10 computer and may not copy or print. I would like to help with that.

  I don't know whether to think it's a software problem or a problem with the hardware of the printer.

  I would like to begin by downloading and running the tool HP Print and Scan Doctor to see if it detects any problems. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

• 4500 envy: Envy 4500 not WiFi connection with numere end

  (Same problem with my other laptop running Windows 7)

  through Wifi or with a USB cable (drivers custom ' settle)

  Installed with disc or by download, same problem

  Can not install printer on laptop computers.  Get to the final stage, the last time I did all the things someone did on the same issue in type - uninstalled software, reset wifi on printer, router disconnected, boot etc... did not fix it.

  Error message: 0 x 00000643 by using the control panel, add the printer on Vista method

  Install the software,

  Ask me to add a new printer

  It found the printer on the network

  Network printer installation begins

  Error message - on two laptop computers, regardless of the method, never cross here

  -Unsuccessful network installation, this printer could not be installed on the network-

  Try searching for thing need that opens.  It does not solve it...

  Everyone?

  Hey @CandyCaneLane,

  Thanks for getting back to me on this subject.

  Because you get the message "the driver for WDF device Print is not installed" under the heading adding printer, it would seem that the packet driver HP full software functionality is not used, even if you have already attempted an install disk with the download. Can I please you follow the steps below.

  Please make sure that the USB cable is disconnected from your printer to your computer.

  Step 1: Remove the device:

  It is crucial for the repairs we have a clean slate to work with. So, I'm going you have to make sure every trace of your HP Envy have been removed from your computer, before installation. Perform the following steps on your computer Windows Vista and Windows 7.

  1. Click on the Start menu
  2. Select all programs
  3. Click the HP folder
  4. Select your HP Envy
  5. Select Uninstall
  6. Please follow the prompts on the screen to complete the uninstall
  7. Click on the Start menu
  8. Select the devices and printers
  9. If you see your HP Envy listed, please right click top and select "remove device' or 'Remove'.
  10. Once the device HP Officejet was deleted please click left once on any device used to indicate the heading Printers and fax machines . You just want to highlight the device
  11. Then click on the print server properties at the top
  12. Under the print server properties, click the drivers tab
  13. If you see your HP Envy pilot showing under the list please click on it. Then, click Remove. Click remove the pilot from the box pop up
  14. Click OK
  15. On the print server properties window, click apply and OK
  16. Close Devices and printers

  Step 2: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Install the device:

  1. Please click here to download the latest package Full Feature Software and Driver for your HP Envy
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Choose the installation by the network
  4. Once the installation is complete on your Vista and Windows 7 computers please test print and scan to confirm functionality

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

  I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

  Hi @thrandall,

  Thanks for getting back to me.

  My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

  Have you tried these steps in my previous post?

• Computer says 4500 G510n is offline, the printer says it can not connect to computer

  I use a Mac OS X 10.5. The printer is recognized as an option for printing on the computer and the printer is properly connected to the wireless network, but the computer will not be printed because he says the printer is offline. Can I have help step by step? Thank you.

  What router?  Have reset you the printing system? :
  
  -Sys Prefs, printing and fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Printer C7283 text print does not correctly

  Hello

  This morning, I tried to print on my new windows machine 8 and nothing won't print on the paper. After installing the software again and do diagnostic tests included in the HP Solution Center, and then he managed to print the letter, but a few sentences where not correctly printed (I mean he had white lines in it.). Also the Self Test Page Diagnostoc was not readable.what will not. Also I tried the printing align attribute and it will until the last part is to say these two birds print and then it gives me a message on my printer console Align has failed. I also changed my black cartridge. but no luck. Please help me I am very desperate!

  1. number and product name

  HP Photosmart C7283 all-in-one

  2 operating system installed (if applicable)
  Windows 8

  It seems to me that your new ink was not registered or maybe the black part of the print head is clogged.  Alignments fail when the ink is not printing.  I understand your printer not print black ink even if you have a new ink cartridge, but I'd like to as you follow the instructions on what to do if you get a "misalignment" error message on the printer because this document covers a large number of measures which would not be separate documents in the case.

  The best way to narrow down the exact problem you are having is by going to the Setup menu (key button) and going to the "Print report" section and by printing a 'self-test report.  This report will tell you exactly what ink cartridge is out if no.  If the ink prints on this page then, it may be something to do with the computer or its connection.

  Read and try to clean the print head by going to the Setup menu (key), by selecting 'Tools', then 'Cleaning print head' If you print this test page and your black is still out.  Other error messages appear before you changed the ink cartridge?  For example, have you seen a message like "Out of Ink" and that's why you changed the ink?  I hope that I can help you!