HP 6100 on extended connection problem router wireless

Similar Questions

• Windows 7 on ASUS PC - connectivity with router wireless

  A few days ago my computer just stopped automatically connected when I connect to the wireless network.

  The troubleshooter it fixes every time, but if I do not use the internet, it stops again and I have to run again and again and again... Well, you get the picture.

  Can someone help me? I would really appreciate it.

  Bill

  Thank you land... it worked but I had to go into properties, go to the power management tab and remove the check in the box next to "allow this computer to turn off this device to save power".

• connection problems router WRT310N and wrt54gs * with DSL

  Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

  I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

  A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

  I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

  highlights include:

  (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

  (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

  (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

  router 4) implements the home network wireless very well, but with no internet connectivity

  (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

  I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

  everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

  and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

  so... help?

  still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

  Any ideas on where I'm wrong now?

  Fixed issue...

  in the end, it's a problem between the ISP's modem and the router that they helped me understand.

  My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

  We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

• connection problems with wireless devices

  I have problems getting my network connected to my E1200. Office Wireless is connected, but if a device needs a password, it fails to connect.  I went into the zone administration and changed the password, but clocks site right after she says my settings have been saved, and devices do not recognize my new password.

  The administration area is for router functions.  Modify or use the password in the wifi section. It is to connect to your network.

• I'm unable to connect to the wireless network.

  replaced the card wireless and cant get driver for reinstall.

  Original title: replaced the card wireless and cant get driver for reinstall.  Help?

  Hello

  Please contact the Microsoft Community.

  You can't connect to the Internet.

  Please answer the question-

  (1) you are able to connect through the LAN cable?

  (2) what is the brand and model of the computer?

  (3) are you referring to the light on the computer or the router wireless?

  Method-

  I would have you look at the article-

  The problems of Internet connection

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-Internet-connection-problems

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Do get back to us and let us know if you need more assistance. We will be happy to help you.
   
  Thank you.

• Satellite L850-18 t has problems to connect to new wireless router

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  Posted by luka_10
  

  Hello

  I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

  I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

  Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

  Among the specifics on laptop:
  -Computer laptop Toshiba Satellite L850-18 t
  -Network cards:
  -AR9485WB-EG atheros wireless network adapter
  -Realtek PCIe GBE Family Controller
  -Router: Tenda

  Thank you!

  What I see is that we have same wireless Chipset, Tenda use Ralink or Broadcom chipsets, which are compatible with our wifi cards, then I would tell you my opinion do 1st updated drivers on your laptop, I use the latest x 64 win10, atheros version drivers 10.0.0.326, then go and upgrade your routers firmware! I don't know it will solve your problem, by the way check firmware of the laptop is the last 6,80 I think!

• Pavilion dv4-2160us with Atheros AR9285 and D-Link WBR-2310 wireless router connection problem

  NB sometimes has problem connecting to the router. This occurs when the NP is booted from power, or when the connection of power mode after about a day of economy since his last connected. Although the network sharing Center sees the network to connect to, but shows only "restricted access". But if the power to the router is recycled, then the connection is established. The driver for the Atheros AR9285 is up-to-date. The firmware of the router is the latest v1.05.

  A test ping Google permanently on the NB and a computer that is connected to the router to isolate the problem. Whenever Google is ping successfully, it displays a message and the response time in milliseconds. If the ping fails, the message will be "Ping: transmit failed." General failure. "  It turns out that, while the test on the wired computer worked without a hitch, the NB has shown that at the same time, the internet connection was lost during the time of connection. He then recovered after a few 'pings '. At another time, the internet connection has been lost permanently without recovery, also during the time of connection.

  Anyone has the same problem?

  After changing the security mode WPA2 to WEP router wireless, the problem seems to have disappeared. It's been 3 days and the computer can still make the connection to the router. HP support says that HP wireless network adapter works best with the WEP security setting.

• No Internet access - network/router wireless connection problem

  I can't connect to the internet after installing Windows 7 64 bit. I can see the router wireless/network from my computer, but it has sometimes limited connectivity or it says connected but no internet access. I used Windows diagnostic tools to try to fix it but it does not work, and my router connects without a doubt to the internet such that I now use on a portable computer that is on the same network. I would like to know if anyone else has this problem and if they fixed. I tried to change the physical address of the connection to the local network, but it didn't work, I guess because I connect via radio and no cable, and I heard similar stories on other forums that this can be a problem more common I suspect. Thanks in advance for your answer, and all the details you need I'll try my best to provide.

  OK I finally got to work, all we needed was for me to download the latest drivers (Realtek 8185 wireless card) off-site and install in compatibility mode, and then he worked all of a sudden. I hope this will help someone suffering from a similar problem!

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• Having problems connecting to my router wirelessly with Equium L350

  I can't find anything on my laptop to connect to a wireless Internet device, please help!

  How do you mean that you can't find anything on your computer to connect to a wireless device? You must activate the wireless card by sliding the switch to the right. In addition, you can activate the card wireless via the keycombination 'FN + F8'.

  A better description of your problem would be more useful. :)

  Welcome them

• Connection router wireless E2500 problem

  I just bought this router and can't connect to my old HP Pavilion a1250n PC I currently use a wireless broadband card to access the Internet Directions tell me to connect the router to my modem.  I have no external modem.  Should I get one?

  You probably just DSL service? Then follow these instructionsions here.  You can have a direct connection with no modem if something like ATT dsl fiber.

• dv6t-6100 laptop loses the connection to the wireless network

  I n HP 6100 dv6t Select Edition Entertainment Notebook PC running Windows 7 (64 bit) with a card Intel WiFi Link 1000 BGN. After starting the laptop and looking e HP Connection Manager to display the message connected WiFi only immediately disconnected.  This just continues as long as the computer is on.  All work well for at least a year before it started, and to my knowledge has not changed have been made.  I have internet Comcast with TM602G ARRIS cable modem and a Netgear WNR1000 router.  I tried to uninstall and reinstall the network adapter, unpluging power and reset the cable modem and the router and start up the laptop in safe mode with network without success.  Connection to the laptop computer directly to the router works fine.  I also have a second laptop running windows 7 with two IPads some smartphones and my printer HP connected wireless without any problem.  I also tried turning off other devices with no luck.

  Thanks again, already tried to reset the modem, the router and the PC as you suggested and that did not work but I tried closing all other devices connected to the wireless router and the laptop connected properly.  Guess I will just have to turn on devices one at a time to see if one of them is to interfere or just for many connected devices.  It's again the aid.

• U940 PSU6VA satellite - wireless connectivity problems

  _ * My specifications: * _
  * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
  * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)
  * Wireless adapter: * Intel Centrino Wireless - N 2200
  * Wireless adapter driver version: * 15.10.0.12 (which is the last for my device)

  I got this Ultrabook since February 2013, and throughout this period, I always had problems with wireless connectivity, even after a factory reset. My wireless icon varies between three States:
  * Internet access
  * Limited (in which case I can't connect to the internet or any other device on the network)
  * Not connected - connections are available (and if I try to connect to the network, it will fail)

  Sometimes my computer would instantly reach the State of "Internet access" at startup and remain in this State. Other times, it would be 'limited' for several minutes after the start of my computer before it finally connected, and even in this case, the connection will drop out every now and then. In the worst case, it would indefinitely remain "Limited" or "not connected", regardless of how many times I reset my adapter wireless or rebooted my computer.

  Until very recently, I always thought that these problems have occurred randomly. However, I noticed recently that I have always a connection perfect, whenever there is no other computers connected wirelessly to my router, and I always have problems more or less when there is at least another computer (or even a smart phone) connected wireless to the router. If there is another computer connected to the router via an Ethernet cable, this causes no problems. It's only wireless connections that interfere with my computer.

  It is only this computer that has these problems; the other computers in my house ever experience these issues, no matter how many computers is online. In addition, my computer is not only these problems with my home router; It has the same problems on the network wireless at my University.

  My question is, how do I fix? Is this a known bug or is my defective wireless adapter? I know that I can connect using an Ethernet cable if possible (I have never problems with Ethernet connections), but this is not always possible at the University.

  Did you remove the old driver Win 8 Intel of the system before you upgrade to version 8.1 to win?
  The old Wlan Intel driver could affect the performance of a Wi - Fi connection.

  The driver update page Win 8.1 says clearly that Intel Wlan driver must be uninstalled and the
  Inbox Windows 8.1 version must be used.
  http://support.Toshiba-tie.co.jp/windows81/drivers/PSU6V_Up_au.htm

• Satellite Pro L300-1 b 9 cannot connect to my wireless router

  Hello!

  I activated the nw wireless on SAT L300 PRO 1 b 9 - but with a lot of struggle...
  First I had to find the switch to turn on (I never got :-)).
  Then I had to uninstall Atheros Windows and set flags on (activate) in the Windows driver.

  But in Linux and Windows, I couldn't connect to my wireless router.
  My luck was that some of my neighbors have a wireless network security-disabled, open, I could map to test.
  The test was succecfully with this network, but my wireless router was inaccessible.
  The other machine I could reach it.

  The result was:
  If I set the router to broadcast the SSID, the two OSs (Ubuntu + Windows) can use the wireless network.

  But if I turn off the broadcast (to protect my router), the network driver is unable to use my router, it does not matter I set the SSID...

  A router is WRT54G, and he works with other computers if I hide the SSID, but as Satellite Pro L300 unable to connect (with this option).

  Someone knows why? What should I do to I could hide the SSID to the bad guys?

  Thanks for any help!

  With regard to:
  DD

  I put t know what Windows operating system you use, but if you use original Vista, I think that, good WLAN driver is part of the package. For the wireless network adapter must be properly installed.

  It is not easy to say what the problem is here, but if the laptop can see and detect your WLAN network side laptop computer s everything should be OK. Try to reboot your router and check all the settings.

  In my opinion, there is a problem with the WLAN settings.

• NB300 will not connect to my wireless router

  Can someone help me please?

  I have an old week NB300 laptop computer that has a built in Atheros AR9285 wireless network adapter.
  I have problems connecting to my D-Link wireless router/AP.

  None of my other wireless products have connection problems, and it is only this laptop that won't.
  I have reset the modem/router, I unplugged the adapter wireless in Device Manager and updated drivers.

  We can see broadcasting and all other my neighbours routers, but just used to connect.

  Any suggestions out there?

  Hello

  You mean NB300 can see your WLan and other WLan in the neighborhood, but cannot connect?

  This would mean that the WLan is enabled correctly because the WiFi network around you are visible
  In any case, check if you have enabled the WLAN using the FN + F8 key.

  In addition, you should go to the properties of the wireless network and need to check the TCP/IP protocol. Disable the IPV6 Protocol and use only IP v4

  In the properties of the TCP/IP Protocol, you should check if all options are set to automatic.
  MAC address filtering, no encryption, encryption password must be checked as well!

  By the way; Here you will find the latest Wlan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them