HP 640 c: HP640c cartridge does not return to its original position and the printer will be no print anything

Similar Questions

• the window on my computer does not return to its original size and I can't use the max and min and exit button

  my window is too far to the right and ive tried to get to the original size and it will until a certain point to the left. This leaves me unable to use the max and min and exit tabs

  Hello

  1. What is the brand and model of the computer?

  2. is it a laptop or a desktop computer?

  3. the problem occurs after leaving the game or program?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  If this happens when you leave a game, I suggest you to follow the steps mentioned in the link and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 3:

  Step 1:

  I also suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You can also check if the problem persists in a clean boot state.

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• I created a my page book epub file, and it works perfectly in ibooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  I created a my page book epub file, and it works perfectly in iBooks. But it does not appear on my other devices, and the .epub file cannot be successfully sent by e-mail. 5.6.2, iBook 1.5 pages

  What's not?

  You must check the iBooks category in your OS X system preferences: Panel iCloud: iCloud Drive: Options: Documents Panel. On iOS, you must have enabled to iCloud and in the iCloud Drive location setting iBooks. Also, in iOS parameters: iTunes and App Store, ensure that iBooks is running.

  The iBook.epub file is a compressed/compressed and renamed folder that represents a single file to any email client. What do you mean, it cannot be sent correctly - and it's your experience, send, or the failure of the recipient to view the ePub document? What email client?

• My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install Blue Squirrel ClickBook "print processor does not appear to be installed corectly. The printer name is invalid. "Printer - 20 and 1798 error error code"

  OT: Print processor.
  During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly.  The print processor is unknown.  The printer name is invalid.  Also "printer error code - 20 and the 1798 error.»  I need CBWP. DLL to work properly in order to be able to use this program.

  Hi Chancey,

  1. are you able to install other applications?
  2. are you able to print from other applications?

  If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.

• I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I want to install a trial version of indesign CC but the username and password does not work. Is my username and the same password I use to connect to Adobe?

  I work on a Mac computer

  Hi Tania,.

  He could be induced to Mac username and password.

  Kind regards

  Sheena

• Module.actions does not return a list of actions for the module. vRO 7.0.1

  It is not as if Modules.actions returns an array of actions for 7.0.1.  I can get the name and the description, but not the list of actions in the module.  If anyone has a chance to check it out in its environment it would be great.

  Hello

  Could you try with .actionDescriptions instead of .actions ?

  I don't know if the problem is in the generated documentation or source code; need to continue the investigation.

• Thunderbird does not work after installing Win 10 and the mobile profile of Win 7

  I've installed Tbird 38.3.0 on a new Dell computer with Windows 10 on this (8 GB of RAM, 1 TB harddrive). I then followed these steps to put my old profile from the old computer to Windows 7:
  1. copied my profile on the Windows 7 computer on an external drive.
  2 installed Tbird on the new computer Windows 10 38.3.0, but has nothing to do with it.
  3. following the instructions on the site of Thunderbird on the displacement of a profile:

    a) Use the Profile Manager to create a new profile on the Win 10 computer.
    b) Copy the profile from the external drive to the new profile folder
    c) Use Profile Manger to tell Tbird to open the new profile
  

  4. start Tbird.

  I see my files with email in them, but there are problems:
  1. None of the Tbird dialog boxes open when I choose a command in the menu bar (including the new Message).
  2. I can't get Tbird to display the contents of a folder in the Home tab. There is only the accounts and the advanced features of the Inbox, display in the right pane, next to the folder tree. The only way to see the contents of a folder is right-click and choose open in a new tab.
  3. when I click or double-click on a folder, the contents of the file does not replace the previous folder. TBird on the Windows 7 computer, clicking a folder displays the contents of the new folder.
  4. sometimes when I Alt + Tab of Tbird, then Alt + Tab, moving the cursor of the mouse on the messages in the Inbox tab causes the message object, Date,... to disappear, leaving blank lines.

  I tried to uninstall Tbird and reinstall it, but this does not solve the problem.
  I tried to reboot Windows 10 but that does not solve the problem.
  I don't seem to be able to download email and preview in the messages pane, but I can't open it in a separate window.

  A lot of people seems to be able to run Tbird on Win10, so it should work. Any ideas on why it does not work and what I can do about it?

  Thank you very much in advance!

  go to add-ons.
  remove the addon of lightning.
  restart - everything should be good.
  If you still need the addon of lightning, install it again - it should give you a new version.

  Please tell us that all is well

• Recommended for battery does not charge if plugged in charger and the system is activated in map mode.

  Anyones answer is welcome to the 21/08/11.

  Thanks to one that meets responsibly!

  Hi Raymond,

  Possibilities:

  1. bad adapter.  Check the status in the BIOS.  That's what it was when this happened to me about 4 months ago.  The battery even though the battery was fine and worked fine llaptop off voltage AC, BIOS did not recognize it as the appropriate adapter type and therefore not allow.

  2. bad battery.  They go bad--and sometimes a little quickly (as you will notice that if you have an extended warranty on the laptop, it does not include the battery).  Check the status in the BIOS.  Remove the battery, use the air to empty the room and a soft cloth to wipe the contacts.  Reinsert the battery and see if that helps.

  3 motherboard problem with connectors or wiring between them.  Very hard to tell her that's it--usually replaced if replacing the other two does not work.

  It is unlikely to be software-related.  This reeks of hardware problem.  Contact the manufacturer's technical assistance service and see if they have any suggestions on how to better ID the cause (and get costs for spares for each of the elements so that you know).

  I have listed them in my view of probability.  You of that or the other need to find someone with the same computer you that can let you borrow the battery and the adapter long enough to test (then you will probably be able to IDENTIFY the problem).  Or you can buy the pieces one at a time and see which works (I hope the first) - and try to get a guarantee of full refund for any reason, so you don't spend money on parts, that you don't need.  You must send it to the manufacturer for repair or take it to a local computer repair shop good reputation for service.

  I hope this helps.

  Good luck!

  PS Si the adapter is plugged into a surge protector, try a different surge protector, or plug it directly into the wall to rule out a defective surge protector.

• After that my virus clean my printer does not work I have windows xp and my printer Deskjet F 300 said

  After that a virus clean my printer HP Deskjet F 300 quit working they installed Windows XP from Windows 2000 and I can't make it work help

  "they have installed?  You had somebody "clean" your computer and they have also installed Windows XP (you used to have Windows 2000)?

  The first thing you need to do is to determine if 'they' a legitimate version of Windows XP installed.  Download and run the MGADiag tool.  If the tool does not report that Windows is "genuine", take back it the computer and demand that 'they' install an authentic version, paid Windows XP.  While they are at it, tell them to install a driver for your HP Deskjet F300.

  If you do not have a genuine version of Windows XP, then go to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128298
  You have several choices to this page.

  • The top line, which only says: 'Pilot' is the complete set of software including software HP's Photosmart printer drivers and the scanner of your Deskjet.  As the HP notes, this is a very large download, so if you want this package, you must have a high-speed Internet connection or order the CD.
  • The second line, which says "Driver - Product Installation software" includes the basic print and scan drivers.  HP has said, "not all product features are supported with this installation package."  I don't know what "features" are not supported if you choose this option.
  • It should not necessary the "Patch" because or the other of the first two downloads is dated after the patch and so should be included.  After things are installed, you can download and install the most recent of the 3 "Updates".

  When you wrote that the printer "will not work" after a new installation of Windows XP, I assume that the printer is not installed at all.  Just in case, however, previously, you use the package that you download from HP, follow the instructions here to clean all traces of a failed attempt to install it.  (Note: remember "Step 4".)  "Step 6" refers to the directions outlined in the upper part of this post.)

• "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

  I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

  Yes, you can try to replace localspl.dll winprint.dll

  Create a restore point from the system beforehand and restart the computer later.

• Firefox does not take into account options made in the print preferences box. How to solve this problem... Please?

  I need to adjust printing to 65%, then select a setting on the printer of non-standard. When I select PRINT, the preferences box is presented to the user, but the changes are ignored. Firefox is simply using the standard settings. How can I overcome this problem please... Please...? Thanks for your help

  Hi Peter, is the problem with a PDF document? Financial sites generally use a PDF research reports and statements which need to have a very controlled format. Usually, you can tell that it is a PDF file, because the document will have a toolbar customized with its own print icon. I think that in this case, dialog layout Page of Firefox is not used because the document is already pre-formatted. But I do not know why the preferences would not work in this case.

• Updating Firefox and got all the info back EXCEPT Yahoo!! Yahoo does not recognize me or my accounts and the Format is all messed up. How can I fix Yahoo the

  Refresh in Firefox 36.0 and got all my info back EXCEPT that when I try to go to Yahoo, he recognizes me, my computer or my accounts. As well as the formatting is all screwed up, everything is displayed in mode requirements.

  Anyone know how to fix or recover 35 Firefox?

  If possible could you post a screenshot to show what you see

  (Be sure to hide all personal information)

  See you soon
  Brad

• Windows 8.1 does not as there is no cursor and the toolbar moves down

  I just downloaded windows 8.1 64bitfor my PC I just built. It was working fine until I left it a little. Now there is no slider, and I can't do anything. Whenever I have click on or type, the toolbar moves a bit down. I tried Ctrl alt del, but it leads us to a green screen Uni (my windows color) and finally restarts to previous state to my frozen office. What should I do or is there some keys/commands should I press?

  Hello

  Please download MiniToolBox on your desktop, double-click it, select only the options below and press go. It will create a journal, please send the contents of it in your next reply.

  • Flush DNS
  • Reset of IE Proxy settings
  • Reset the FF Proxy settings
  • List of installed programs
  • List of Restore Points

  Download CCleaner from here. Once installed, open it and head over to the Tools tab, and then select start. In the lower right corner, select Save in the text file and select a name for it. Open the saved document and display its content in your next reply. As-well as. Click the 'clean' tab, keep all the boxes to check it and press run cleaner.
   
  Download Autoruns from here, save it to your desktop and then extract it. Double-click the extracted folder and navigate to autoruns, and double-click it. Select the file, save and replace the 'save as type' text file. Type a name for it, like Autoruns log, and then click Save. Please post its content in your next reply.
   
  Run the System File Checker
  http://support.Microsoft.com/kb/929833
   
  Run the disk check
  http://www.thewindowsclub.com/disk-error-checking-Windows-8
   
  I also recommend that you run a scan with Malwarebytes Anti-Malware and AdwCleaner. If you have problems by the foregoing, I recommend to start in safe mode and try the steps.
    
  Thank you
  Party of Lighthouse