HP 6500 E709n-lights but NOTHING else responds

Similar Questions

• Satalite Pro > Power lights but nothing else?

  Hi all

  A small question. Received a Satalite Pro. The power turns on but nothing else.
  I tried the HARD drive in my m200 Portege and its XP Pro running. The Satalite Pro has 1 > 512 MB ram stick inside.

  The overall condition is good and I'm tempted to spend a few shillings to try to bring back to life or we are talking about a major surgery.
  My knowledge is fundamental will have to spend to get fixed.

  Would like to receive your ideas / suggestions.

  Thank you
  Neil

  Well, in my opinion you should first check the RAM modules.
  The faulty RAM memory would prevent the laptop to boot.
  The RAM modules are the first parts that need to be checked.

  But if the modules are ok, then part of the material such as the CPU or the motherboard could be defective.
  In this case, the replacement of parts can be expensive

• computer is connected to the airport, but nothing else does

  My time capsule airport is plugged in and the light is green.  My iMac is connected to the network via wifi without problem, but nothing else will connect.  My iPhone and apple TV to see the network to connect to, but when I select keep just try and custom actually connect.

  We just moved and the internet was created just to our new home, but nothing has changed.

  What is the number and model of your modem?

  When you set up the new Internet service, you you connected your iMac directly the modem?  If you did, it's probably the problem.

  What operating system runs the iMac?  If you are not sure, click on the Apple icon in the upper left corner of the screen and click on in respect of this Mac, then poster is back with Version of OS X number that you see there.

• Satellite A100 does not power up - LED orange flashing but nothing else

  My Satellite A100 laptop fell on the couch and now wont power up,

  I get a flashing orange LED but nothing else.
  This only happens with the AC adapter is plugged and not with the battery.

  What can I do to solve this problem and what should I watch?

  Hello

  Try to remove the battery and unplug the AC adapter.
  Wait a while (> 2 hours) and then reconnect the two parts.
  If the laptop still not, will fuel even using a good power adapter and the battery in good condition, the problem could be related to the problem RAM or the motherboard.

  You should also try to delete one (or two modules if you have some spare parts) module of RAM and should try to turn on the laptop.

  Good luck

• For Windows XP, desktop background well, but nothing else seems no icons, nothing

  For Windows XpBackground desktop is fine, but nothing else appears, no icons, nothing, a message saying UxTheme.dll. is missing and re - install it might help, but I don't have the disk. I put it to date by a company, and they must have. I don't really know anything computers as well. Write slowly please.

  Thank you

  Tonya

  Sometimes to restart Explorer, you can get out of this situation.  When you arrive at the blank screen, press Ctrl - Alt - Delete if all goes well a window will appear that allows you to choose 'Task Manager '.  Click on the Task Manager and when it starts, click on the "Processes" tab and then select the file-> new task.  When that window comes to the top, enter "Explorer" in the box, and then click 'OK '.  I hope that your screen will then fill.

  HTH,
  JW

• My screen of zuma game reduced to half its normal size, but nothing else is affected

  Original title: screen problems

  My screen of zuma game reduced to half its normal size, but nothing else was hit.

  Hi Jodi661,

  ·         What is the brand and model of the computer?

  Check the status of the display driver in Device Manager:

  a. click on Start

  b. in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  Follow the methods below:

  Method 1: Try to change the resolution of the screen and check the results.

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Method 2: If the method above is not enough, you can see the article in the Microsoft Knowledge Base and check.

   

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  I hope this helps.

• I can sign in to Skype, but nothing else

  When I turn on my computer, I can connect to Skype - but nothing else.  I get a message about parental controls.

  Hello

  You may need to disable 'Parental control' - try to see here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/turn-off-parental-controls/cd131ce8-6004-4DDD-bdd8-aba696d1c16d

  LC

• My network printer will display the test in Windows 7 page, but nothing else. It is a Brother MFC-440CN

  My network printer will display the test in Windows 7 page, but nothing else. It is a Brother MFC-440CN

  Hi djmatthewlee

   

  1. How is the printer connected to the network?

  2. is the printer directly connected to the Windows 7 computer?
  3. do you have the updated drivers installed for the printer?

  You can refer to the link below and use the printer troubleshooter. See if it resolves the issues -
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

   

  You can also check out the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  I hope this helps.

• Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Hello

  I suggest you fine the link below and it will help you.

  Does not open App | Wheels of progress turn continuously

  Concerning

  Maansee

• Satellite M35X-S149: no boot, cs blue light and the fan comes but nothing else.

  I have a * TOSHIBA SATELLITE M35X-S149 * that does not start.
  The blue power light and fan comes on +(fan ran for 5 seconds and stop) +, nothing else.

  Yes, the RAM modules must be verified.
  I remember that one of my friends had a very similar question.
  The power led was ONE and after pressing the power button, the cooling modules was audible for several seconds. But the phone didn t initialize and nothing was visible on the screen.

  Finally, we found that one of the RAM modules was dead
  After the replacement, that everything worked perfectly!

• I have a aspire 5517 who will not, start seeing power turns on but nothing else happens.

  I have a aspire 5517 that won't initialize power light turns on, but nothing happens.  I tried to connect an external monitor, but it still doesn't work.  All my stuff is on this computer and I need to save at least. Help!

  Hello..

  You can try to remove the battery, then connect only the power adapter ON the computer and check if you are able to start the computer.

  In order to return the data take the hard drive on the computer startup and slave with another computer and you will be able to transfer the files from the hard drive of your computer to another.

• Windows Update will download sometimes. But nothing else will download.

  Windows update takes over sometimes.  Don't other times not.  Nothing else will download.

  IE9 Vista 32

  A ran the aid elements that I had access to.

  Impossible to download other MSN help elements to understand the problem

  Avast says I'm fine.

  Restored both previous midweek December 2013.

  Problems began.

  Windows options for research problem have been executed, but can not download other options.

  IE9 says it's fine.

  Don't know if the problem is with Windows, or IE

  Lost.

  Hello

  No error codes or other details for us to work with, give your machine a melody by following these steps.

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Solitaire to expand, but nothing else has

  so I was playing spider solitaire and I moved my laptop and I pressed the buttons in the lower left corner (caps, shift, ctrl, fn, window and alt), I have no idea what I pressed but I know that I pressed some combo at least one or two or more.  the solitary window took more b/c that all cards to expand.  I have 25 No 85 I could see children perfectly well... nothing else got bigger or modified in any way, how to make spider back to normal?  I don't like it!
  Thank you

  Hi abryson615,

  Forgive me if this is a stupid question, but have you tried the program of closing and reopening? I know for a few days, but we discussed earlier how to change the default size of windows when open in Vista. It seems that they always return to the 'original' size to restart. It seems ironic that what is undesirable and accidental would manage to keep its new settings when you restart.

  Dave D
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP4500. Wireless: Wireless HP4500 - prints Test Page but nothing else

  I just bought my first iMac.  I also have a HP (Windows) laptop connected wireless to a HP Officejet 4500 Wireless printer/fax combination for work.  For the new iMac, I loaded the software from the HP drive.  The test page printed beautifully, but nothing prints.  No e-mail, not a word processor file, nothing.  I have tried the uninstall / reboot / reinstall way nothing helps.  I saw the instructions to configure a static IP address, but I'm not sure what could do to my current computer-printer link.  Any suggestions?

  Unfortunately, I am not sure I can reproduce the steps but I finally got my printer to work.  I had to install a new driver from HP and Hello "Multifunction" from Apple.  After several reboots, the printer works now.  Sheesh!

• nslookup works but nothing else has DNS on standalone PC Win7.

  I can connect to cables and wireless networks, the computer gets an IP address and the gateway and DNS from DHCP server very well and I can connect to things via ip but nothing can resolve DNS nslookup, which seems to work perfectly except. Network and sharing Center shows as 'connected' and 'no internet access. I tried many things, and now, I'm stumped. The problems began when a router has failed recently, several other machines come online when the defective router was replaced, but it never did.

  Some of the things I've tried...

  uninstalled anything that could possibly mess with networking: McAfee, Hamachi, Hello etc.
  has run the McAfee removal tool
  starts in safe mode
  tried multiple profiles
  turned off the windows firewall
  Unchecked
  the DNS 8.8.8.8 manually for each card value
  Set an IP address for google.com manually in the hosts file: ping will not always solve this
  disabled the dnscache service: makes no difference then re-not active it
  netsh int ip reset resetlog.txt: not a no effect and resetlog.txt is never created
  netsh winsock reset
  sfc/scannow: not found corruption
  unchecked ipv6 for all network adapters in the system
  restarted, like, a million times

  CPP, DHCP, DNS Client that all seem to be running.

  Hardware tests very well, no DNS problems with interface either when running a linux boot disk, so there must be software.

  There is nothing in the logs has not already was a problem for several months or is not directly attributable to the lack of connectivity, this problem of network is new from 3 or 4 days. Significant error entries only are, annoyingly, for system restore and VSS which means that the system did not the restore points for several months, and even more annoyingly, fails to restore those what already with a "catastrophic error 0x8000ffff". Embarrassing if it isn't, there was obviously a problem for months without affecting the networking.

  Interestingly under "Access Type:" network and sharing Center, I get "No Internet access", but when I open a browser and go to google via an IP (173.194.37.136) that changes quickly to 'Internet' although I still cannot ping google.

  Other the only thing I found which looks not right is that ipconfig/registerdns does appear the error: "DNS record failed: the RPC server is unavailable" which seems strange as CPP indicates its execution in services.msc and everything seems to be OK. There are a few pages on the web that mention this error but they seem to everyone apply to servers and it is a dell laptop vanilla Win7HP64 running.

  Things that I have not tried...

  relocation of hardware drivers: I tell myself that if it affects Intel Realtek LAN WiFi AND it may not be the drivers for those

  I'm now ideas.

  Help please!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.