HP 6520 will not work after changing the black ink cartridges

Similar Questions

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• Maxify MB2320 will not print after changing the ink cartridge

  I just changed my black ink cartridge last night and now it won't print. B504 code keeps coming up and I followed these instructions to restart the printer. Whenever I turn on the printer, it spits out 2 pieces of paper, so the paper is not jammed.

  Hi GinaC,

  To resolve the error B504, contact technical support directly. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays).

• I'm not able to find the black ink cartridge CH561h Hp122 near my place in Mumbai

  I'm not able to find hp122 black ink cartridge for ch561h near my position in India for my printer hp dekjet 1050 A all in one set then please let me know what other model cartridge n ° would work for my printer my hp 122 was the embarrassment. Otherwise let me know where in Mumbai 122 Hp cartridge is available or can u sell even online at my address. ?

  Hello

  The ink cartridges for the India are 802 balck ink (CH561ZZ) and 802 (CH562ZZ) color ink cartridges.

  You'll see maybe listed indformation suresupply by selecting your location and search for your printer model:

  https://h30042.www3.HP.com/SureSupply/CountryChangeSubmit.action?nav&nav#3

  Once you have the black and color ink cartridges available, contact HP support to reset your printer to accept the local cartridges for your region:

  http://WWW8.HP.com/in/en/contact-HP/phone-assist.html#section1

  Shlomi

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Windows Update service will not work after upgrading the hard drive

  I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.

  This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive

• Lightroom 6.5 will not work after restoring the windows 10

  First of all, let me say that Adobe support for a pro user product sucks. Really? no other than this support?

  My windows 10 workstation crashed and did a restore. I understand that it is early and I had to reinstall the update 6.5.

  Problem is that Lightroom does not open because he repeats to me there is problem of catalog and will not allow last backup is only a few days to work.

  Then. How to solve this problem?

  The only thing that worked was completely reinstall Lightroom 6, and then apply the latest update.

  After that, I was able to use the last catalog had been saved.

  You guys seriously need better than this forum support if you want to think of yourself as a product for professional use.

  When all else fails reinstall, but this kind of support, it's not what you need.

  Capture One to become a better alternative if you have a serious problem.

• Keyboard shortcuts do not work after changing the blending mode to a layer

  There is a strange bug that I experienced with photoshop. Whenever I change the blending mode to a layer (for example by selecting "Multiply" in the menu drop-down blending mode), my keyboard shortcuts stop working until I have click on the canvas again. It's annoying because often, I'll be on the Brush tool and I did draw on the canvas and press ctrl + z to re - activate keyboard shortcuts. I'm curious to know if this problem occurs to someone else and if anyone has found a solution for this.

  Version of Photoshop: 20150722r.168 x 64

  Operating system: Windows 10

  It happens on Windows, because the drop-down list with blend modes remains highlighted or active (around the blue line). You can press ENTER to confirm and delete the highest point around blend mode dropdown or use keyboard shortcuts to change the layer blending mode. To change the layer blend mode, you must have selected layer and then press Shift + Alt + letter for the blend mode. This shortcut does not work in the case where the tool you are using have mode option in the blending Options bar.

• vCenter WebClient does not work after changing the field of vCenter Server

  Hi all

  I had to migrate my vCenter to a new domain. This migration is smooth without any problems. Everything works fine.

  Now, some of my colleagues need to use the web Client and I discovered, after to be authenticated successfully to the web server,

  I have an error message:

  Unable to connect to vCenter Inventory Service - _ https://vcenter._olddomainname: 10443

  Thus, even after reinstalling the Web server on my vCenterServer (version 5-update1) component, it always uses old domain information.

  I can't find where to change it.

  Hope you can help me with that.

  Thanks in advance,

  Frank

  Have you tried to run the command as shown in register.bat

  http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-9C65879E-7442-46E2-9A20-A858B2800D12.html?

• Sony Vasio SD Card will not work after getting the new hard drive

  Troubleshooting-Sony Vasio SD card

  Recently had to have a new hard drive installed and the technology couldn't get the SD card to work. Help?

  You should probably just change the drive letter: http://support.microsoft.com/kb/307844

• HP deskjet D1520: incorectly color printing after changing the black ink

  I replaced my color ink the printer was working fine, then the necessary black replaced so I replaced that and now print colors turned off. I did a test on my computer. The upper part is the color on the screen, the bottom is the printed color. Help, please! I removed my devices, Cup of the printer and reconnected, then reinstalled and it still printed in this way.

  

  Hi @sadie731,

  Welcome to the HP Support forum.

  I understand that you have a HP Deskjet D1520 printer that prints wrong colors when sending your computer Windows 8 print jobs. I would like to help with that.

  Page 87 of the HP Deskjet D1500 Series user manual, providing the steps which can solve the problems of print like that quality.

  If it's a matter of print quality caused by the software and printer drivers. It would be better to completely uninstall the software and printer drivers. Here is a video that you can use to reference - uninstalling in Windows 8 HP printer drivers, if needed.

  Once uninstalled, you must reinstall the software and drivers. Here is a link to the page where you can start downloading - drivers and software HP Deskjet full functionality.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• HELP... z400 will not start after changing the BIOS settings

  Hello

  I went into the BIOS and changed all the PCI slots to include 'calculate' so now it does not recognize video card, now it does not start far from enter the BIOS to undo changes. Ive pulled the battery, reset the CMOS button and jumped the pins CMOS won't default. To b e there is a way to fix it... Please any ideas will be appreciated.

  Hi Glenn,.

  Thanks for posting your query in Microsoft Community.

  Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I recommend you contact the manufacturer of the PC for the procedure for making changes in the BIOS.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Tecra A3 does not work after changing the power settings

  I changed my power settings in my tecra a3 laptop and now it does not start correctly. wants to start but just keeps going back to press F2 or F12 it please help.

  Hello
  where did you changed them? In the BIOS or in the Toshiba HW setup?

  I suggest you go into bios after turning on your machine. You have to hit just F2 Ant then in the search for bios for setting "all default setting" or something with "bios setup defaults" to reset your bios settings.

  After that, your computer should start up again.

  Welcome them

• replace the black ink cartridge, but I cannot print anything. Could not load the publication SmartWeb w/o say

  After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.

  Can I get a support phone number to get this problem resolved?

  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.