HP 6700 and CMYK printing colors

Greetings

I have a Dell laptop with Core i7, Windows 7. I designed a logo with the red and the black. The color of the design was derived from the RGB palette in paint. When it prints on my color inkjet HP 6700 the black color is fine, red, however, seems to have too much blue in there.  but because the printer's CMYK how can I fix it? I realize color is extremely complex, when you have a screen with its ability to color, RGB in a program and the printer CMYK. One of the websites that allows you to convert to CMYK RGB indicated 0 (255) green red and blue 0 equals 1 Magenta and 1 yellow with cyan 0. Is there a way to control the printer?

Kind regards

Dave

Hi DaveABear,

This isn't my area of expertise, but your question was very interesting for me.

I did some research and found that Adobe Photoshop, Illustrator and In Design all the presets for the conversion of RGB to CMYK, dealing with the differences in the range of colors offered by each offer.

Click HERE for a link to the web site for more information and instructions on how to convert RGB to CMYK files.

I hope this helps!

Tags: HP Printers

Similar Questions

  • Yosemite and hp printer color laserjet 3600n hp office jet pro 8600

    Hello

    I've updated the maverick at yosemite. The last update for the printer software has been installed (version 3.0 on October 1, 2014). But both printers not working anymore.

    Color laser jet 3600n stops after 10% of printing with the PCL XL, subsystem kernel error, error: data, missing operator: sole source, post 14.

    With the OfficeJet Pro 8600, it is quite similar. The printer starts loadin page. After a few minutes the printer push the empty pages. In both cases the Mac lost the connection to the printer for a while. After a few minutes the connection is established.

    The system is OSX Yosemite 10.10

    Color LaserJet 3600 driver version 2.0.3

    connected to the cable / Hello

    Serial number [personal information deleted]

    number of Procuct Q5987A

    OfficeJet Pro 8600 N911a

    connected without wire/Hello

    FW-version CLP1CN1322CR

    Serial number [personal information deleted]

    driver HP Officejet Pro 8600 2.0 version

    Product CM749A number

    Information device of the HP utility software.

    A response in the German forum was helpful:

    • reset the printing system
    • Reinstall the printer HP (HPPrintDriver3.0.dmg) update
    • restore volume access rights,
    • Restart the system and
    • Reinstall the printers

    After that, the two printers works previous.

  • 6500 a Plus E710n: I printed out a page and only print colors, not black ink.

    I used the printer all day. printing in black and color. Then I printed a page with only black characters and each line was striated. I printed again and he had disappeared, still streaked. The next time nothing printed. So I printed out a page with the type of color and black. Showed that the type of color. Is - fixable?

    Thank you

    If you call us, we can discuss the availability and price of a replacement printhead. We might even see if there is a trade in option is available to get you a discount on another model of the printer. I understand that you have closed cartridges, but if you leave that never talk about who know, he or she may be able to help with that too.

    If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

    I think, it's best to call and decline an offer, don't know not which is at your disposal.

  • Printers HP 309 g - m: black ink does not print not and feel vaguely colors.

    HP 309 g - m question all-in-one printer: I replaced two of my color ink cartridges in my printer and now black ink does not print and vaguely printing colors. My ink level is all good (not even close to being out). HP printer cartridges. was working fine before. Help, please. Thank you.

    The here document has troubleshooting which can help solve the black does not print on your Photosmart c309.  Be sure to check the vents.  If the above does not resolve the problem, the message here can help.

  • Installation: HPLIP and remote printing from ANDROID and iOS on a static network of HP printer

    I recently installed a HP LaserJet Professional m1212nf MFP printer on my network and gave it a static IP address.  On my main computer (also statically networked - Ubuntu 12.04) I installed the hplip service and can print to it successfully.  On the same computer, I have a Dymo Labelwriter and a HP ColorLaserJet 1215 connected by USB.

    I can print from my iPhone / Tablet Android of ICS to the printer and the printer color laserjet use Airprint service, but I can't seem to print on the m1212nf with Airprint.  If I print via CUPS with Airprint driver I get a completion from print but the printer does not print.  Now, since the m1212nf printer is NOT connected to the CUPS print server by USB, it makes sense, unless I can be told how to configure CUPS to print to the device on the network.

    -or-

    I think, from what I've read so far, this Icould use eprint if there was a way to put a windows driver (Yes, reluctantly, I have access to a Windows laptop that I can put on my network) on the m1212nf and hplip driver which currently allows it to communicate with my main computer.

    I would prefer a solution Airprint as Airprint works with mobile devices, the other two printers.

    OK, egg on my face!

    It turns out that iOS functioned perfectly well, but does not have the Android app, I had on my tablet.  In addition to continuation of the Android issue, I have found only one free application that worked (at least for the text) in the game store, but we were really a "demo" as the print was a watermark, but we could remove the watermark for two separate awards, one for the text and one for the photos.

    But in responding with a solution to this problem myself, I consider that it {SOLVED].  In addition it leaves no doubt that Airprint and the "generate airprint-' script works for versions of Ubuntu Ubuntu on the side.

  • HP 6700 will not print in color

    OFFICEJET 6700 WINDOWS 7 my HP officeject 6700 used to print in color and now only prints in B & w. went forward in the configuration menu, click on the GREY SCALE, but only option is black how do I get it to print in color again. Thank you, Sue

    Hello marrre,

    Welcome to the Forums of HP Support!

    Are able to copy in color using the Officejet 6700? If you are able to copy in color the problem may be on the side of the computer.

    You could try printing HP and Dr. Scan, it will look at the software and drivers installed for the printer.

    Let me know to come out.

  • black and white printing on HP Officejet 6700

    I have an IMAC 10.8.1 operating system.  I can't get my 6700 HP to print only black and white.  Even when I choose black and white printing, it will not be printed like that.  I can't implement any new printing preferences.  Now, I'm unable to print anything and yellow ink.  Went and bought a new black ink and printer recognizes that black ink is full.

    I don't know just something I am doing wrong.  Can anyone help?


    The application that you are trying to print from, launch the print dialog box (file > print).

  • Several printers print color when I choose black and white

    Here's a strange. Using a 5520 and a 7520, two printers will only print in color, black and white. I made sure I select black and white, and I've updated my drivers. Any ideas? Others use these printers without this issue, then it might be on my end, but I have no idea what it would be.

    Hello @Alex-Tutorme, greetings!

    Thank you for joining the HP support forums, I would like to help

    I understand that you are having problems when printing in black and white in two of your printers.

    We will try to change the printing preferences:

    • Go to control panel - devices and printers - give a Photosmart 7520 (also on Photosmart 5520) right-click and select Printing Preferences.
    • Go to the tab "paper / quality" and make sure that 'Black and white' is selected.
    • Now, click on the 'Advanced' button - check to the option "print in grayscale". Make sure it is turned on. Apply and save the settings.

    Please let me know if that solves the problem, or if you need assistance

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

  • Canon MG5200 printer prints all colors except black in pink. So I can get black and pink print

    My printer is all colors except black in pink.  So I can get black and pink print

    Hello

    As Canon OEM is responsible for the good operation of the printer and their
    drivers provided. Check with Canon support, their books online and
    drivers and ask in their forums (if any).

    Canon - Support and drivers
    http://www.USA.Canon.com/Cusa/support/consumer

    Canon - Support - contact us
    http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

    Canon - Windows - Vista and Windows 7 support
    http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

    Canon printer - page local confirmation - could be from another region.
    http://pdisp01.c-WSS.com/OS/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

    Hello

    • What were the changes made before the problem occurred?

    You try to run this fix and check.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    If above does not work, try contacting Lexmark support for assistance.

    http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

  • Why my PRO - 100 black-and-white prints have a color tint?

    I print out on the printer PIXMA Pro-100 and sometimes, for no apparent reason (?), my black and white prints have a color tint (generally a "reddish brown"), then when printing to new... same settings print, same... the same impression will be fine, neutral with no tint at all.

    No idea why?

    Also (perhaps related?) I do not understand why Photo-Cyan and Magenta cartridges are exhausted when I'm NOT print color, but only black and white.  Am I missing something?  When you set up for printing, I always make sure that the 'Black and white photography' feature is selected in settings dialog "Quick Installation".  This ensures not only the black and gray inks are used as long as I'm not "toning"?  In other words... ONLY black and gray inks are used, if not the impression that is supposed to be a black and white printing neutral? Yet once... I missed something?

    FOR INFO:

    I print on Canon Pro radiance papers and more glossy.

    Under 'Options - color management', I selected:

    (color management) Photoshop Elements handles colors

    (image area) Adobe RGB (1998)

    (the printer profile) Canon PRO-100 1/2 Luster Photo Paper Pro

    (rendering mode) Perceptual

    The most important thing is the paper you choose to print on.  Find this first release. Any Epson printer which uses UltraChrome K3 inks will do a better job with B & W as a Pro-(anything).  But Epson suffers from obstruction more far do, Canon Pro-100 problems.

    If you print a lot is not too big of a problem, but if you print once a week or once a month to forget it.  Go with Canon that clogged very rarely, if ever.

    Try to find the right paper.  It will make everything better.  Call the Red River or Canson and ask them to recommend a book.  Red River will work with you and they know the Pro - 100 inside and outside.

  • HP Photosmart Premium - C309g and it stopped printing in black (but prints color)

    Hi my HP Photosmart Premium - C309g and it stopped printing in black (but prints color). I tried: -.

    1. print test page - empty outside the windows logo
    2. Turning the power on and the
    3. programs form printing.

    Both black cartridges are full.

    printer is 3 days on 1 year warranty!

    I'm not very technical, so easy solutions would be preferred.

    Thank you

    Try the solution in this thread to clean the printhead C309g.

  • OfficeJet j5780 does not print color only black and white

    I replaced both cartridges.  Only black and white prints regardless of the program on my computer that I print. The printer prints a copy scanned in color well.  Help, please.

    Here is a solution for this problem.

    Color image prints in black and white

    Let me know if that solves the problem.

  • my printer is working, but it will not be printed in color and a new color cartridge is installed.

    HP Deskjet D4160 printer with the Windows XP computer. My printer is working, but it will not be printed in color and a new color cartridge is installed - what can I do?

    The steps in this troubleshooting page can help solve the problem.

  • in windows photo gallery, print color in black and white photos

    I just bought a hp printer c4640 all-in-one, and now when I print a color photo of the windows photo gallery, it prints in black and white. This printer is a desktop gadget to click and drag a photo to be printed, and if I do that it prints in color. I checked my settings of the printer, and I'm stuck.

    any help would be appreciated. Thank you!

    A

    Hello

    This happens usually if the print options or preferences are changed for your printer. To select print options, you must open the image you want to print. Most print options are located in the print dialog box, which you can access on the file menu in the program that you are using. The options that are available to you depend on the program and the printer you use.
     
    To access some options, you may need to click on the link 'Options' or 'Advanced Options' button or tab in the print dialog box. To learn more about the print options for a program, see the information for the program.
     
    Printing options are determined by your printer capabilities are called printing preferences and may include printing separation pages, color or image quality options and Staples. Like program options, printing preferences are displayed in the print dialog box. Look for the buttons labeled "Préférences" or "Properties". You can choose preferences each time you print a picture or preferences to default configuration to use for all the photos you send to a printer.
     
    Try these steps and check the result.
    Step 1: Set the default printing preferences.
    1. Click here to open Printers.
    2 right-click the printer you want to use, and then click Printing Preferences.
    3. Select the preferences you want to use as the default the next time you print to the printer, and then click OK.
     
    Step 2: Use print preview:
    To see what the print will look like before you print it, open the picture in Windows Photo Gallery that offers a preview before printing. Print preview is typically located on the file menu. You can choose the print in preview mode options and then print directly from the preview.
     
    To solve printer problems, download and run the Microsoft fix it and check the result.
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

Maybe you are looking for

  • 2165 DX PCI FOR PAVILION DV4 DEVICE DRIVER

    LOOKING FOR PCI DEVICE DRIVER PAVILION DV4 2165 DX - WINDOWS 7. HEWLETT PACKARD WEBSITE DOES NOT.

  • Its worked yesterday, today, that it is not.

    Yesterday and today, after restarting this morning, there is no sound.  I checked the speekers and connections. Is there a way to validat the sound card works? Any help?

  • Update of HP probook 4530 s processor

    Hey,.I want to upgrade the processor in my hp probook 4530 s intel i3 with intel core i7-3840qm Horn I can or can't do?

  • access discussion groups

    Hi I am trying to access newsgroups and I turned off my firewall McAfee (temporarily), but this dialog box appears again if it is windows firewall how turn off I visited the 'allow programs through a firewall' but my program is not listed 1 week late

  • Cannot open lightroom 6 no cloud) that I bought on the web

    Hello,I bought the 6 upgrade for my lightroom 5 (no clouds) on the web on August 27 for mac (I have the latest operating system). I get an email with my code number and instruction how to download lightroom 6.3 days later, I still not able to downloa