HP 6980 printer - cannot connect wireless with the new modem/router

Similar Questions

• CANNOT CONNECT WIRELESSLY WITH THE PRINTER!

  I need assistance to find, how to connect wireless my Windows RT (8.1) and my HP Deskjet 2541.

  Hello

  Gow do you connect your printer now? Are BOTH on the same network? Please try to use Wndows store to install HP AiO Printer Remote.

  I hope this helps.

• 4620 wireless with the new modem issue

  This will be my first post on this forum so Hello to you all!

  Until week th elast everything was working but: I have a 4620 all-in-one connected to the wireless network (it's a netgear modem) and I was able to print wireless all documents of any surface (iPhone, iPad, Macbook, Samsung galaxy,...). I recently switch to another type of wireless connection, it's "half-way optical fiber": my provider provides me with a modem that can go from 20 to 30 mega on the wires in my apartment and it connect to the fibre outside the building.

  Now, I tried to set up my printer to my macbook. Everything works very well with a USB cable, when I remove the USB cable during configuration (such as the window for example), it is not able to find my printer and Setup fails.

  Printer and macbook has the same SSID, the printer has an IP (192.168.1.138) but can't find my macbook. Is there some strange decor I not taken into account? Is there something, in your experience, I put on the page settings of the modem?

  Please help me, it drives me crazy as Wi - Fi is crucial for me, as I have to print documents from multiple sources!

  Paolo

  Finally found the solution! Last night I did all work properly!

  The fact is that this new modem allows two mde connection: 2.4 ghz and 5 GHz. My provider set as well with the same SSID and password so I did not understand that my macbook connected to 5 g wirelees while the printer on the 2.4 g.

  When I separated the two network different SSID and password I could connect to the same network and got all this work! Even my ihpone, ipad and whether

  Great printer by the way!

• HP Photosmart B209a is no longer connect wirelessly because change of modem/router

  I recently had to change a modem Motorola Surfboard, router Netgear (both at least 5 years). The new modem/router combo is a C3700 Docsis 3.0. My printer HP Photosmart Plus B209a model is no longer connects to the wireless network.  I tried the push button and pin. I get a WPS, unable to connect. When I print the network settings, my network is listed but the printer shows offline with no active conection. Firmware is EIL1FNO926AR and stands as the last revision of the printer. Wireless 802.11 under the mac address is given, and status is offline.  In addition, the printer and modem/router are about 3 feet apart on the same desktop.

  Any ideas for what to do to get my printer back online or is not compatible with the new modem/router?

  Thank you

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• printer scan works only with the new windows 7

  upgrade windows xp to windows 7 with the new HP Omni 220PC. Have a printer HP C309g-m. To scan from the printer to the computer xp, I had to use the HP Solution Center. The printer works very well with the new windows 7 program and new computer. I install wireless. No problems with it. Today when I went to scan a document with the HP Solution Center (I thought I had to use as before), this message came.

  "HP Solution Center cannot work because your device installation is not complete. Please connect the usb cable, or rerun the installation for a network installation cd. If it does not complete the installation, or you do not have the cd, access the HP help files by clicking on the start menu. "Everything I did. My installation CD said I had a version of the latest update on the installation CD, it was of no use. I went to the HP site and find a download for the drivers updated etc. I downloaded and installed. (although I don't know whether or not it was a duplicate of the drivers of devices on windows 7 for this.) I checked Add/Remove programs to make sure that the printer and the hp solultion Center have been added to the programs. they are listed. I can always scan with

  the hp Solution Center. Should I not this program to scan with this new pc? How can I scan from my printer now? I even tried to click scan on the printer, then scan to computer. the message I got was 'Try from scan of compurer. Refer to the documentation for more details ".  To be sure, I'm all mixed up now. All I want is for my scan printer to work with my new pc.  Everything works well except that scan thing, may help me understand what to do?:  Thank you

  all fixed. has crossed my computer to start then click HP click HP and open list. Went to my printer-clicked on my printer and clicked on the icon list to see if it worked correctly. This is a problem with the drivers and a box popped up with directions on where and how to download and install the devices for windows 7.
  Done this and tested it and everything works fine now. (Ihad already tried the HP site for support and downloaded and installed the fix suggested for the problem, but it did not work). in any case, its fixed and I hope that if someone has a problem, this information will help you.

• Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  1. you have cr 8.7 or better: use the dng converter or upgrade your pse in v. 13.

  2 mac App Store version is German. Photoshop Elements

• Cannot connect remotely via VPN since installing the new modem/router

  Can anyone help please. Since the acquisition of a new router / modem I can no longer connect via VPN to my work PC remotely. It comes in I receive the error message. Can someone tell me if I need to change the settings for the new modem / router to access?

  

  Hello Joanna,

  Here are the steps you need to do first:

  1. Off static IP for my server and let the router assign IP address and changed the IP address of the port forward.
  2. Check the IP address because obviously, that changed when you plugged into the router again.
  3. Updated to the latest firmware for the router and NIC.

  For more detailed troubleshooting you can refer to this link: troubleshooting common VPN related errors.

  Let us know how it goes.

• my laptop cannot connect wirelessly to the internet with the built-in wireless adapter

  G50-118NR my client specification identifies my network home qwest DSL WPA2 as public wireless whenever I connect wireless using the Atheros AR5007 802 wireless network adapter. 11 b / g WiFi and does not connect to the internet.  I can change the Private type, but it does not help.  I have restored the laptop using Vista Home Prem 32-bit recovery CD and that did not help.   The wired connection works perfectly and other 'g' and 'n' USB wireless adapters also work very well.

  Hello:

  Please read my post on the link below for the Atheros cards and newer routers, and see if you install the latest Atheros driver I posted on it works for you.

  http://h30434.www3.HP.com/T5/wireless-Internet-home/Atheros-WLAN-driver-fixes-connection-issues-with-many-new/TD-p/701407

  Paul

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• Network printer will not work with the new router

  Just changed routers and now cannot print on Officejet Pro 8000 A809, which is connected to the router ethernet.  On Windows 7, download a message indicating that the printer 'cannot be contacted over the network.  Tried unplugging printer ethernet cords and power and reconnect the Self Test and Configuration network pages printed OK, but still cannot print.

  Before I saw this solution, I decided to try to uninstall and reinstall the printer.  It worked.

• Router WRT54G wireless does not work with the new modem

  Hi, I use my router WRT54G (Firmware version v2.02.7) on 4 computers for more than four years now, without any problems at all. However, today I had to replace my old modem with a brand new modem Speedtouch from my supplier, and although I made sure each cable has been connected properly, it just doesn't.

  The connection between my PC and the router (http://192.168.1.1) is good, but the problem must be between the router and the new modem. When I click on 'Status', he said: ""connection status: disconnected".

  After clicking on the 'Connect' button, it tells me that it "can not connect to the PPTP serverbe"

  Help, please

  Hi Matt,

  Although the resolution of this problem was a little simpler, I still thank you for your answer.

  The neighbor boy came up with the following response:

  «It just check the Type of Internet connection, cause you got an old type of modem before.» It will probably be set to PPTP. If this is the case, simply change it to "Automatic DHCP Configuration", click on "Save Settings" and everything should be ok then"

  And he was right!

  I am so happy

  BR,

  Niqui

• HP Envy 4500 cannot connect wireless to the printer

  Recently I bought HP Envy 4500 printer. Connected to my router ok TP-Link3631 and have successfully printed from android phone and portable computer connected wifi but cannot print wireless from the office, running XP Pro, but allows you to print via a USB connection. Office see printer through a router using 192.168. etc and printed the report. Have tried to install the software via disc cd and internet several times, Inc. reinstall, but can not get computer to connect. Have been round and round in circles several times, also used print and scan doctor without success. It seems that the software is not fully installed. Or maybe something wrong with the network. Anyone have any ideas? Thank you

  Hi @atr345,

  I see by your post that one of the computers is not recognizing the printer on the network, but you can print by a USB connection. I can help you with this.

  Type the IP address in the address bar of Internet Explorer to see if the built-in Web page printer server load on this computer.

  Check the computer IPV4 address to see if it matches the first 3 games of the IP address of the printer.

  Go to start, type cmd in the search box, enter, then type ipconfig.
  Check the IPV4 address.
  Now, check the IPV4 address for the printer. (192.168.1.9)
  Do the first 3 sets of numbers match? (if they do not match then the computer is not on the right network)

  Try and ping the printer.

  In the same window, type ping printers (space between ping and IP address) IP address
  What are the results?

  If the available printer built-in Web server, the first 3 sets of numbers of computers had matched the address IPV4 of the printer and you could ping the printer, then try and configure the connection to printer wireless via the USB connection.

  Installation of the software of the printer for a wireless network connection.

  Please go to the first step: preparation for installation, number 4.

  If you need help, let me know.

  Good day!
  Thank you.

• Turn on the WiFi problem - Atheros AR5007EG Wireless feature will be not - light Windows 7 RC 6.1 - found problem: wireless capability is turned off. Cannot connect wireless with

  I'm not much on COMPUTER stuff so please help - that is the problem...

  Turned on my computer today and cound not connect to internet. The card WiFi AR5007EG says this isn't tour.
  Toshiba L335D - 7820 labtop does not have a switch to turn it ON or OFF, the laptop using fn + F8, but won't do anything.
  Driver details: 8.0.0.225 Windows Device Manager says: this device does not work correctly. I uninstalled the driver,
  Downloaded the newest and re-installed and restarted the computer 5 times.  It is a: Microsoft Virtual WiFi Miniport Adapter #3 that shows that I don't remember being there.  I disabled it and retarted the computer, but no luck.  Finally, when I look at the network connection, the wireless card is showing all the bars in green, but with a big red X.  And Yes, I made sure the network is working correctly.

  Hello

  Atheros AR5007EG wireless card is not on the compatibility list.

  Check with the manufacturer if it is compatible with Windows7.

  You can also check here

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  And you better get to Windows7 RC version.

• Cannot print wireless with the new windows 7 and the new printer the series wireless Kodak ESP 5200

  We have recently installed Windows 7 and a new printer wireless, Kodak ESP 5200.How can we get the printer to print wireless. At the present time he refuses just!

  * original title - we have new Windows 7 and the new Kodak ESP 5200 series wireless printer. How do we get the printer to print wireless? It will be printed next but not when disconnected *.

  Hi John and PaulineWhite,

  See the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  I hope this helps!

• HP 6500 E309n cannot connect wireless with 10.7 (Lion)

  I have a printer wireless HP 6500 E309n which worked fine in Snow Leopard, but not after the update to Lion.

  In system preferences, I can query power and using the printer utility levels, I CAN print a test page, but I can't print a configuration page.  Print a page configuration results in the message "could not print the configuration page.

  When I try to print from an application program I get the message "the printer is unresponsive.

  However, when I access the printer directly from Safari, I can print a page of "status of printer report."

  Yes, I have "reset" my printers (delete all printers) and reinstalled the 6500.  Yes, I went through a software update.  Yes, the printer works fine with other computers on the network.

  Help...

  It's weird.

  I unplugged and physically moved the printer next to the router to test a connection via a ethernet cable (worked fine) then he moved the machine to Lion to connect via USB (worked fine).  When I then connected wireless, it also worked fine.

  Apparently simply cut the power and reboot did the trick.