HP 700-149: care needed for modules DIMM Ram

Similar Questions

• No need for Modules common Win XP for Satellite A205-SP4068

  Hello

  I have a TOSHIBA * A205-model No. SP4068 * PSAF0U-08X01X * and I need the "commom modules" for Win XP PRO SP3. -.

  where can I download it?

  Thank you and best regards,

  Gort

  This model of laptop US?

• Care need for Satellite C50-A-1DV

  Everywhere, and have been nothing else than the frustration of trying to use the services of Toshiba 'help' heavy and largely unnecessary.

  If anyone can help, I need the specs for the i3 C50-A-1DV Satellite.
  I looked for an hour now and I can't find anything.
  In short, I want to buy the new memory - update 4-8 GB - but I can't find any info beyond
  What ddr3.

  _Adeybob_

  Hello

  Autour Googling, I found the tracking information: your laptop model can be improved up to 16 GB.
  RAM modules compatible you can use are:
  2 GB DDR3-1600-PA5037U-1M2G
  4 GB DDR3-1600-PA5037U-1M4G
  8 GB DDR3-1600-PA5037U-1M8G
  By using these reference numbers you can find the complete specification but it takes DDR3 1600 MHz.

  I recommend you to use Rams compatible and quality only.

• Satellite L30-113 does not recognize the two modules DIMM RAM

  Hello

  I have a Toshiba laptop Satellite L30 113.
  It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
  It's DDR2 553 MHZ (PC4200.

  The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

  Did I miss something?
  They should be the same size as in the bad old days?
  What is going on?

  Thank you

  Adam

  > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
  Seems that the two RAM modules are not completely compatible...
  I've read several times on these issues and to be honest it s are not uncommon

  I advise you to buy two identical RAM modules ad then to try again

  I'm afraid there is no other solution for your problem of m.

• HP Pavilion p78 - 1180t - driver of the need for the DVD-RAM GH80N

  My DVD drive on my HP desktop computer no longer works.  It appears as a unit under control panel, but fails to show up in Windows Explorer as a disk when a DVD is in it.

  The error message I receive is "configuration in the registry information is incomplete or damaged (code 19).»  I ran a registry fix that part of my AVG Internet Security suite, and while he fixed other errors, it has not fixed this problem.

  I couldn't find the driver on the HP support site.

  Hello:

  Please try each of the troubleshooting steps, 2, 3, 4 and 5 from the link below.  One of them should solve the problem.

  http://support.Microsoft.com/kb/314060

• Impossible for cars from Need for Speed after updating the graphics driver.

  I recently updated my drivers intel HD graphics 4000 on my laptop Samsung windows 8. Everything works fine with the updated drivers, but there is a specific problem with it. As I updated my graphics drivers, I ran "need for speed \u200b\u200bHot pursuit 2010". He started very well, but controlling the cars in the game looks very different he was with previous drivers. It becomes difficult to control the car in the game. When I deleted the drivers and represented the game, the game ran everything as he ran with the graphics drivers updated but the difference was that control the car in the game back to normal.

  Only thing drivers assigned to day seemed to be control of the car in the game need for speed pursuit 2010 \u200b\u200bHot. I have other car games as well and they work perfectly well with the updated drivers.

  Any ideas what is causing this issue?

  Original title: problem with update graphics drivers

  I contacted Samsung and they provided the solution. Problem is now solved.

• I have can´t open the version of 30 days for photoshop cc2014. Windows tell you car needs windows 7 or 8, but I have windows 7...

  I have can´t open the version of 30 days for photoshop cc2014. Windows tell you car needs windows 7 or 8, but I have windows 7...

  The requirement is: Microsoft® Windows® 7 with Service Pack 1, Windows 8 or 8.1 Windows

  Do you have SP1 for Windows 7?

• Need car charger for Satellite A100

  Hi all
  Anyone know if there is a car charger for my Satellite A100? I can't find one on the Toshiba site, but I saw several on ebay. I don't want to ruin my laptop, anyone who has used a & if so where did you & what was the cost?

  Thank you
  Gary

  Hello

  Visit the Toshiba site Options & accessories.
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOP

  There you can find extra parts and devices. You should also find a compatible adapter.

• Tecra M5 (PTM51E) - What tools I need for the FN keys?

  I am trying to install a new version of Windows XP on my laptop.

  Can anyone confirm which software from the support site, I need to install to get the Fn + F keys to work?
  I installed everything on the site but I can't get the buttons working.

  Screen brightness works but buttons to switch between WLan, WLan + Bluetooth etc do not work.

  Thank you for any assistance.

  Hello

  You can answer this question yourself as on the Toshiba site, you can find the installation instructions document. Use this list as an installation order recommended to work properly for laptop.

  In any case, for the FN keys, you need:
  -Common modules
  -Controls
  -Utility Hotkey for display devices
  -Utilities

  Good bye

• Satellite L20-100 - what modules of RAM can I use for the upgrade?

  Hi all

  I have TOSHIBA Satellite L20-100 and I need to upgrade the ram memory up to 2 GB.
  I found these models on the internet but I don't know that it is compatible with my computer laptop or not.

  the following module on the eBay store:

  * 1 GB Kingston DDR2 667 Mhz 1 GB DDR laptop 2 NB RAM *.
  * Hynix 1 GB RAM DDR2 5300 s - computer notebook memory 667 MHz *.
  * ASint 1 GB DDR2-667 PC2-5300 PORTABLE 200 pin MEMORY *.

  Already now I have 512 DDR2 667 Mhz

  Or any knows from where can I update the correct RAM?

  Hello

  Theoretically, you can use all modules store because all the modules to meet specifications, DDR2-RAM, 1 GB, etc. for example.

  In your case, I'd take the Kingston RAM. I've never heard ASint RAM, but I have good experiences with RAM Kingston. I always use Kingston RAM to upgrade my notebooks and never had any problems.

  Last but not least, you can also buy RAM of an authorized service provider.

  Good bye

• whenever I try to load need for speed underground 2, I get this error with vista can someone help me figure out please. __

  Problem event name: APPCRASH
  Application name: need for Speed Underground 2.exe
  Application version: 0.0.0.0
  Application timestamp: 417d8e48
  Fault Module name: need for Speed Underground 2.exe
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 417d8e48
  Exception code: c0000005
  Exception offset: 001d24c0
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033
  Additional information 1: a613
  More information 2: 55689aa387c807ab900bd44bfa935768
  3 more information: b5ed
  Additional information 4: d06b121c03be15a74ebeeadaf13834df

  Hi Leinenweaverp,

  Welcome to Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue.

  ·         Were you able to load this game before and play on it?

  Here are some steps that may help you.

  First of all, I suggest that you perform a clean boot on the computer and install the game and make sure if you are able to load the game and play on it, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual:

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  If the problem persists, I suggest that you contact the manufacturer of the game for further assistance, you can check the link: http://www.nfscars.net/home/index.aspx

  Hope this information is useful.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Post a message (need for clarification)

  Hi all
  This is going to be a long post, because I want to give good background.

  I wrote a message on the cancellation of the automatic updates. Here, it is pasted:

  "I have an old HP Pavilion dv7-4180us Notebook PC using Windows 7 Home Premium. It seems that I can never stop automatic updates. There is a problem.
  On the one hand, we are informed to install updates to keep our machines running well, up-to-date, to increase security. But I found that when these control sooner or later my computer, that my device is malfunctioning and I have to run the system restore.

  QUESTION: how to cancel - once for all - automatic updates all the?
  QUESTION2: How do you know which programs are bad operating system and are necessary?

  The damage has been done is usually a bad slowdown in operations. Start-up takes longer, opening files is slower, and I got an impossibility to open my system thanks to the fingerprint recognition.
  About me:
  -00359 - 899 2687 OEM product ID - processor: Intel (R) Core (TM); 5 UC; M 460 @ 2.53 GHz
  -Memory (RAM) installed 4.00 GB - system Type: 64-bit operating system
  -Prod. No.: XG834UA #ABA
  All comments welcome. Thank you. »

  (end of my first message block)

  A response has been sent by a peer:
  He pasted my original message in the upper part of his, then added the comment below. I have stick.

  "Windows updates are updates most of the time required of course there are glitches but then you must restore to the last frame of work and try to update again." Constant updates is a good indicator of your operating system is corrupted and you need for your system back to factory recovery install and update again.
  -First follow help links.
  Do not know how to display help click on the following link.
  First time here? Learn how to post and more
  -For disk recovery only.
  Get a HP USB recovery or HP recovery disc drive
  Read this before ordering your recovery discs! (United States and Canada only)
  Don't PM me if you do not allow PM in return. »
  (end of message from One Peer, glued)

  I tried to send a response to a peer. I clicked on the button "Answer" in the bottom right of his message, but my answer is back to my original thread. The 1st link in the message is 'Learn to use the forum.' It is said (stuck),

  A brief subject title including:
  • Name of the product
  • A brief description of the problem
  • A detailed message with the following information:
  o name of the product and operating system
  o How do I find my product name and number?
  o Description of the problem, including:
  o error messages, if applicable
  o changes to your system until the problem occurred
  o do not include the serial number of the product or personal information.
  (end of dough)

  With this link, I guess that a counterpart found my original post did not argue correctly. BUT: I entered the information about the product. on my first line and below the o/s. According to info. the link, I did everything that I need.

  QUESTION: was my insufficient message following protocol?

  Approved One also said in his message, (quote is pasted): ' don't not PM me if you do not allow PM in return '.
  In my attempt at a peer response, I wrote (pasted below).

  "Your last comment, ' Don't PM me..." If you do not have... "
  Could you explain that? Do you have I have somewhere a "PM" option for answering machines cannot delete "PM" me? Not to my knowledge. Finally, please be so kind as to explain what is "PM". "(end of dough)

  QUESTION: given that my answer to the q. above might not have reached a counterpart, can someone pls. specify what is "PM"?

  Another issue is the link 'Learn to use... forum.' A link on this link goes to "" tips ask the ' very best Question. "» "I opened that and saw this picture:

  

  In the image is "CNF". It's a serial number. Confusion which is on the first link "learn... use... forum", it is said, 'Do not understand the serial number of the product, or any personal information'.
  Please clarify this discrepancy, betw the statement and the image.

  LAST QUESTION: want to post this message, I thought that it wasn't on laptops, then search "HP Expert Forum. However, under "Choose a Board" has a long list, then "Show all" and "HP Expert Forum" comes. However, by clicking on it, I can't see in the empty bar where I need to place it. What I am doing wrong?

  Please follow the long message. All responses appreciated.

  AtAF

  I can't answer all your concerns. I will try to answer some of your questions and give you some places to look for answers.

  ---------------------------------------------------------------------------------------------------------------

  P.m.s are Messages private, somewhat like a mail between posters, but always using the guidelines and the presentation of the general forum.  In general, most people have this feature enabled.   I have impossible (not) comment in particular on the use of any Expert of the service.

  More information: How to send a private Message

  ---------------------------------------------------------------------------------------------------------------

  The bit about Product Information reminded members do not provide the serial number of their computer.  People post their serial numbers, their send addresses, same numbers on occasion.  It is an invitation only and we strongly advise anyone to publish personal information on this public Web site.

  ============================================================================

  Windows updates

  Everyone has an opinion about updates.  On a Windows 7 system, the need for updates - once the system is installed and the main updates are installed, AND assuming that it does not install no matter what additional programs or software - is mainly to preserve the system of some security problems are hiding everything.

  If you want to turn off Windows updates, then do it.  You are the admin.  It is your machine that is at risk - or not - and it is your decision to make.

  You can switch automatic updates / stop in

  Control Panel > set view icon > Windows Updates > settings

  Windows updates - turn auto update or disable

  ============================================================================

  Essential programs

  As a general rule, you must the programs running on the computer when it starts up which are included in the list of programs in the system and Microsoft programs in your startup file configuration list.

  How to use MSCONFIG in Windows 7

  Note the general Word - depending on what you have installed on your computer, your boot file can be filled with, well, an interesting range of programs that can indeed have slowed down the performance of your system over time.   Yet once, however, most of the programs - unless they are poorly written, or you forced them into the startup sequence when they belong there – are not by themselves slowing down the system by law "to be in the startup list.  In other words, you might consider doing some homework before snatching the programs in this list.

  ============================================================================

  -Comment-

  Your computer contains only 4 GB of RAM and he is older; We say "vintage".  This is not to start with a lot of resources and Windows 7 can, in itself, consume a lot of what is available.  Windows 7 is greedy.

  Add a gourmet operating system, a file system (perhaps) fragmented, a couple of badly written programs (bad code), less fast blazing to the Internet, and you might have the recipe for a slow computer.  I'm not saying that your computer is under one of these weaknesses, only that many computers don't have these problems.

  -------------------------------------------------------------------------------------------------------------

  Resource monitor

  Resource hogs could be traced using the resource monitor.  Even on Windows 7, the tool is pretty sophisticated. You can spend time learning how to use it effectively.  However, the program is very effective to help you quickly catch programs that are hogging resources (memory and network, for example) that you have available.  For example, if you have a program that took all the memory and ran Amok, so to speak, the monitor will be able to quickly show what offending program to the wrongdoer.  In most cases, you can kill the culprit (identify, right-click > kill).  If you trash your system and really hang things up, press the power button and accident-shut down the computer.  You really want to do it very often. but every Admin has made at least once a clearing.

  -------------------------------------------------------------------------------------------------------------

  Maintenance

  If the system is corrupted due to lack of maintenance, then you can provide this service by giving him some of the attention, he needs without actually going and perform a complete restore.  (Shudder).    Good maintenance, especially on a vintage with a limited capacity system helps the computer make the best use of its resources.

  Good care tips can be found here:

  Improving the performance of the system without adding memory (Windows 7)

  -------------------------------------------------------------------------------------------------------------

  Fingerprint login

  After that all other maintenance was performed, it is possible that the following might help to restore the connection of fingerprints.  Understand that I have NOT used digital personal in a certain number of years and this is a quick overview of the subject.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8

  If you use a laptop:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect
  • Reinstall your driver validity sensor:

  validity sensor Driver V2.1.0.2 RevA Win7 sp52354

  • Restart the computer and log in
  • (Re) Install the Digital Persona software

  sp50048 Digital Persona Fingerprint Reader Software V5.1.0.175 Rev A

  At this point, I restart the computer once more and sign in, although this software is so robust that you could get away with jumping final restart.

  Reference:

  HP Pavilion dv7-4180us Entertainment Notebook PC Drivers

  -------------------------------------------------------------------------------------------------------------

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• HP ENVY 700-149 freezing several times (graphics card problem)

  Hi, I bought a HP ENVY 700-149 days ago and right out of the box it freezes several times every 10-15 minutes that it is in use.

  Indeed, it appears a little error box in the corner that says:
  "Display driver stopped responding and has recovered. NVIDIA Windows Kernel Mode Driver display driver, Version 311.41 stopped responding and has successfully recovered. »

  Sometimes this box appears several times in a row (quickly) and the computer continues to operate, but more often it pops up this message and then the computer freezes and must be stopped and restarted manually.

  In addition, it will crash occasionally to the 'blue' Windows screen with the message: "UNEXPECTED_KERNEL_MODE_TRAP" and the specific problem refers to "nvlddmkm.sys" which I googled and it has to do with the Nvidia graphics card as well.  The installed (from the factory) graphics card is a NVIDIA GeForce GT 635 with 2 GB memory DDR3 dedicated.

  I installed all the updates that are available for Windows 8 and have checked the Web of NVIDIA website for updates for the driver but nothing is available and the problem persists.

  Can I do to solve this problem?

  Hello

  Your PC is under warranty. Not to be with an intermittent problem with a new PC.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

  HP has a 21 day return policy.  After that, it's a warranty issue.

• How can I run Need for Edition (1997) special speed 2 game on my Windows 7 PC?

  I have NFS SE 2 of 1997 (just downloaded). I run it on Windows 98 compatibility. But when I start a race go buggy graphics and field, environment, detail of the car, everything looks like a red, blue pixel? Is it possible to run this game properly. I have an ATI 4570 graphics card and processor i3.

  Create a batch file back and copy this

  TASKKILL /F /IM "explorer.exe".
  CD D:\"games"\Need For Speed 2
  Start/w nfsw.exe
  Start C:\Windows\explorer.exe

  NOTE Explorer is the cause of your problem of color,

  It will turn it out and back after game is over

  NOTE 2

  line 2 this where my game

  You may need to change this to your gaming site

  It works I myself have

  The bat file came changes based on other games with the problem

• When running Need for Speed Most Wanted game a black screen appears and freezes the system

  When running need for Speed \u200b\u200bMost wanted... I am facing problem that I get a black screen and my system hangs... end of mission need for speed... I see a box pop up displays

  get the solution online and qyit

  close the program

  debug the program

  and on the opening of the details, I see this

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NFS13.exe
  Application version: 1.0.0.0
  Application timestamp: 506ef77f
  Fault Module name: igd10iumd32.dll
  Fault Module Version: 9.18.10.3071
  Timestamp of Module error: 51493b0a
  Exception code: c0000005
  Exception offset: 0001 has 097
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Original title: APPCRASH

  When running need for Speed \u200b\u200bMost wanted... I am facing problem that I get a black screen and my system hangs... end of mission need for speed... I see a box pop up displays

  get the solution online and qyit

  close the program

  debug the program

  and on the opening of the details, I see this

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: NFS13.exe
  Application version: 1.0.0.0
  Application timestamp: 506ef77f
    Fault Module name: igd10iumd32.dll
  Fault Module Version: 9.18.10.3071
  Timestamp of Module error: 51493b0a
  Exception code: c0000005
  Exception offset: 0001 has 097
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  What is gd10iumd32.dll?

  These files more often belongs to the product shim NVIDIA D3D drivers.  and were most often developed by the NVIDIA Corporation. These files usually have NVIDIA D3D Shim Driver, Version 331.65 description

  Source:

  http://SystemExplorer.NET/file-database/file/igd10iumd32-dll

  What you can do

  1 see if you have the latest driver from Nvidia display.

  2. If you already later, uninstalling and reinstalling Nvidia Display.

  3 roll back to an older driver