HP 7210 all in one - will not be printed on the fast project configuration

Similar Questions

• j Office Jet 5780 all-in-one will not stop printing

  My printer won't stop printing the last thing that I printed on the net.  I closed it works again and continues to print again and again nonstop.  I like google bar installed but had before anyway.

  Try to clean the queue as follows:

  1. Enter the Control Paneland enter the Printers.
  2. RightclicktheHP Officejet J5700 series icon, then click Cancel all Documents.
  3. Make sure that the printer is turned on, if it prints always - let him 1 or 2 pages more that the PC can still in treatment of the cancellation of print.

  Please let me know if this is useful,

  Shlomi

• My 7250 Photosmart all-in-one, will not be printed. He keeps asking to replace the blue ink cartridge lite.

  How can I get around the error message that doesn't work I would like to print?

  jason_h wrote:
  The Photosmart 7250 requires that all cartridges are available to be able to print. It is built into the unit to stop damage to the print head by preventing the ink to dry in the ports.

  If the machine gives an error that a cartridge is low and needs to be changed, then it should be changed to resume printing. For more information on depleted of ink cartridges in the Photosmart 7250 see the link here.
  I replaced the bad blue cart. get the right one tomorrow - more to follow. Thank you

  jason_h wrote:
  The Photosmart 7250 requires that all cartridges are available to be able to print. It is built into the unit to stop damage to the print head by preventing the ink to dry in the ports.

  If the machine gives an error that a cartridge is low and needs to be changed, then it should be changed to resume printing. For more information on depleted of ink cartridges in the Photosmart 7250 see the link here.

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• HP 1315xi all in one will not print.

  Recently had to wipe my hard drive and reinstall everything.  I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.

  I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site.  After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print.  It will scan and copy, but not reading as a printer.

  Help, please.

  Hello althor1170

  It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?

• HP Office Jet J6480 All In One - will not analyze with Mac OS 10,8.3

  I could not get my HP Office Jet J6480 All In One scanner after upgrading to 10.8.3.I followed other positions and have installed the most up to date driver (http://support.apple.com/kb/DL907) , but whenever I try to scan from the HP Device Manager or photosmart studio, it says "sorry, scanner could not be initialized. (scanner not found) "I tried to make sure there is no other updates by clicking settings in the Device Manager by clicking on check the updates but it says 'server not available - service software is currently not available. "Please try again later" and I got this error for the last week.

  I followed the second set of instructions available here: http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Software-Update-Server-Unavailable/td-p/18... to try to resolve this problem and install the software found on the link. I restarted my computer and I always meet the same problem.

  Note: My printer is wireless and I have not hooked by a cable. Will make a difference?

  My printer seems to be printing very well.

  Thanks for any help you can provide.

  Sara

  To add, both HP Device Manager or photosmart studio are part of the software and not designed for Mac OS X 10.8 10.5.

  Here are the steps to scan with your printer on mountian lion, make sure to run the software update first to ensure that the latest HP drivers are installed:

  http://support.HP.com/us-en/document/c03550518

  Where the scanning software do not work as expected, that more probably caused by incompatible drivers installed on your system.

  In this case, remember to remove the software by following the HP uninstaller program (under Applications > Hewlett-Packard), rebot Mac and install the correct software by following the steps below:

  http://support.HP.com/us-en/document/c03378792

  Shlomi

• DeskJet 3510 all-in-one will not feed the paper correctly

  I have a Deskjet 3510 all-in-one and it is only about 6 months.  She went from fine print one day not to catch the paper or grab 2 or 3 pieces at a time.  Sometimes, it will sound as he begins to print and then a beep of 2 or 3 times.  Suggestions to help?

  Yes! I wasn't in the lower plate, and that's where he was suspended. Thank you!

• Printer HP 6210 all in one will not print computer

  My HP6210 all in one printer will not print from a computer that has Vista. My operating system is Windows. The printer worked fine with my old laptop that did not have Vista. However, as soon as I have my Phoenicia connected, which has Vista, it will not print. My computer doesn't work anymore so I need to use hers. What can I do to make it work? Thank you

  Beeky27

  Hi @Beeky27,

  Welcome to the HP Forums!

  I noticed that your HP Officejet 6210 won't print from your Windows Vista computer. I am pleased to see that for you!

  First of all, I would make sure that the full feature software and drivers are installed, by downloading it from this link: HP full feature software and drivers. Then I would run the HP print and Scan Doctor, to ensure that everything works.

  Let's start with these steps and go from there!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm

  Difficulties that the printer will not accept 250 gsm paper past the printhead.

  Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.

  I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?

  Thanks in advance.

  Welcome to the @noxasforums.

  I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.

  Let me know what happens!

  • HP ENVY 100 (D410) and 110 (D411) e-all-in-One Printer Series - 'in paper' Error Message displayed the ENVY and the printer isn't looking upwards or the paper feed

  Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.

  

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• CA410 all-in-one will not be installed... does not detect the printer

  Help... cannot install printer s/w

  I have a PC running W7 64 bit

  Printer is all-in-one CA410B... It was installed and running, a couple of days he threw error "missing components" and would not printing software launch.

  Tried to re - install... failed

  Most recent downloaded software file... Tried to re - install... failed

  Removed all... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install "as Administrator"... failed

  Each time, it happens to the screen to plug the USB cord... I do it... get the "Boing" sound so I know PC has detected the USB device... and I see "Installing message device driver"... but the HP software does not see that... and stop right there.

  See the attached screenshot

  If I check the box to continue without attach printer full installation does not occur.

  In Device Manager, it says "Photosmart Prem c410" if I removethese it will not install

  I guess that W7 is detect the printer and with the help of a driver that is installed, rather than seeing the HP software that? the clues how to get around this, I want to get the complete package installed it again.

  

  Try using the brush included in the CD or download.
  Of the original printer installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  9. use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  10 download the drivers and full software features
  http://goo.GL/VQW7M
  11 start the download to reinstall the printer
  Starting a download:
  1. run the disk cleanup on your computer
  2. download and run the software and the drivers below.
  http://goo.GL/VQW7M
  3. once the download is done retrieve, cancel the download.
  4. click on the start menu.
  5. click on run.
  6. type %temp% enforcement
  7. Locate and open the folder starting with 7z (example: 7zS2356)
  8 open the Util folder
  9 open the CCC folder
  10. run the L4uninstall.bat
  11. once the uninstall is complete, restart the computer
  12 run the Accessories\ System Tools Disk Cleanup
  13. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  14 use this tool to clean the system and the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  15 download the drivers and full software features
  http://goo.GL/VQW7M
  16. run the download to reinstall the printer

• HP Envy, printer all-in-one: printer, HP Envy all-in-one will not print after reinstalling instant ink program

  I have two printers, exactly the same thing, 5530 want all-in-one. One is in Arizona where I live part-time and we're in Oregon where I live part-time. I stopped instant Oregon printer ink when I went to AZ last November. I use instant ink program to AZ while there but she stopped this week when I went to Oregon. I tried to restart instantly ink, got an email that it was successful, but can not get all documents to print from laptop to the printer. Yesterday that it said unable to connect to the server and I chatted for two hours with HP on how to solve the problem. It will print the web now compatible congratulations sheet, but if you ask the computer to print, it circles repeatedly and it seems to wake up the printer at all.

  Now:

  1. If the printer is connected to your Mac via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click the icon of your Apple system and print and Scan preferences.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the more in the lower left corner.
  2. Select your printer from the list.
  3. In the box titled use select your printer in the list.
  4. If you have an option to choose a name or location for the printer, enter a name such as Oregon. This should help you and your Mac to make the difference between your two printers later.
  5. Click on Add.

  Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP f2110 all-in-one will not work

  Just my laptop was restored following a nasty BSOD. Printer has worked before. Does not work now. Printer has power and works. When I click on HP digital imaging monitor I get a box saying - peripheral Hp No. have been detected. HP Solution Center will close now. I downloaded the driver online (can not find disk) still no luck. Any ideas?

  Hi Dominicjack,

  1. You are able to print using other Windows applications?
  2. You are able to print a test page?
  3. Ran the installation of the printer setup?

  I suggest you see if you can print the atest page.

  Print a test page

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

   

  If you are unable to print the test page and then download and installdriver and full features software on the HP site, check if it works.

  See also below link for more information.

  The all-in-One HP products - solve installation problems for connected USB all-in-one Windows products

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.