HP 750-160qe (envy): cannot add a new PCI graphics card: MSI Radeon R7 260 1 GB

Installed MSI Radeon R7 260 in empty PCI e 3 X 16 PCI slot. Voltage and power key lighting comes on for 2 seconds then off.

Remove the card and click OK. Card requires the additional plugin 12VDC 6-pin that is

This is a new PC with a 500W PS but with integrated graphics Intel insufficient...  What is a housing problem? A problem of 12VDC

or a Bios problem or should I return the HP PC and buy something else. Enjoy a preview.

Hello

Review of HP articles posted below.  The article refers to Windows 8, but they should also apply to Windows 10.

HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

Thanks for posting on the forum.

Tags: HP Desktops

Similar Questions

  • cannot add the new hard drive more than 2 TB on vsphere upgrade 5

    can someone give me a clue? I can't add new greater than 2 TB drive to my vm on my upgraded vsphere 5.0. My data store is 6 TB and already read by vsphere... I create new virtual machine and add the new drive, but it limits again just 2 TB when I change 4 TB, the error message will appear. I recently added my datastore LUN with VMFS5 version. is there a any mistake I made? Please help me this problem is so frustrating me... i need to create new disk 6 TB to my new file server

    Hello.

    You will need to use a RDM in physical Compatibility Mode to achieve. As weinstein5 said, a VMDK cannot be greater than 2-to-512bytes. You can use the OS to spread over several 2 TB-512bytes VMDK, if that's what you really want.

    Good luck!

  • Cannot add the new log file for the 11g database.

    Salvation of DBA

    I'm not able to add the log file, I receive the error message when the database is added.

    SQL > alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of size of 50 m;
    alter database add logfile group 3 ('/ oracle/DEV/db/apps_st/data/log03a.dbf','/oracle/DEV/db/apps_st/data/log03a.dbf') Re-use of 50 m of size
    *
    ERROR on line 1:
    ORA-01505: Error adding log files
    ORA-01577: cannot add the log file ' / oracle/DEV/db/apps_st/data/log03a.dbf'-fichier
    already a part of the database

    SQL > select a.group #, a.status, a member of the journal of v$ a, v$ logfile b where a.group # order of b.group = # 1;

    GROUP # MEMBER STATUS
    ---------- ---------------------------------------- ----------
    1 ACTIVE /oracle/DEV/db/apps_st/data/log01a.dbf
    1 ACTIVE /oracle/DEV/db/apps_st/data/log01b.dbf
    /Oracle/DEV/db/apps_st/data/log02a.dbf CURRENT 2
    /Oracle/DEV/db/apps_st/data/log02b.dbf CURRENT 2

    Kindly help me to add the new log file to my database.

    Thank you
    SG

    PGO

    Please see (how can redo log group be dropped when it ever becomes inactive?) [ID] 730827.1).

    Thank you
    Hussein

  • Cannot add a new file folder in images

    I open my pictures and you try to add a new folder and nothing happens

    Hello Ann,.

    1. do you get an error message? If so, what is the exact message?

    2 has there been recent changes made on the computer before the show?

    I suggest you follow the steps provided by Linda Yan dated from Monday, May 24, 2010 08:38 , the following link and check if it helps.

    http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf

    Registry warning: back up the registry

    For more information, see the links.

    Include folders in a library

    Work with files and folders

    Please post back with the results and we will be happy to help you further.

  • Cannot add a new Place in the Version 13 of the first multimedia elements

    Hello

    I use the trial version of the first elements Organizer, which I plan to purchase if I can get this problem resolved.  When I click on 'Add locations' button at the bottom of the screen AND when I click on the Green over the button "Add a new place" at the scene of the altarpiece program Barbadori crashes and I get the message "program not responding" Windows 8.1.  I clicked "Wait for the program to respond" and waited more than 5 minutes and nothing happens.

    This does not happen to the Photoshop elements Organizer; However, all I need is the organizer and the video editing so I spent with elements of Prime Minister.

    Thank you

    Andrea

    Please do not take into account.  I rebooted and installed the updates of Windows and it seems to work fine now.

    Thank you

    Andrea

  • Cannot add the new data store

    VM dear supporters,

    My vSphere environment: 1 vCenter Server Foundation, 3 vSphere 4.0 Enterprise 5.0 and vSphere Client 5.0

    1. read the error message in the attachment:

    "hostdatastoresystem.queryvmfsdatastorecreateoptions...". »

    2. already the ESX02 reboot but still unable to add the new data store.

    New size of the data store = 3.1 TB

    Need to vmsupport on this subject.

    Thank you

    Hello

    Size Max LUN VMFS is 2 TB-512 MB in vSphere 4 (your hosts are in version 4), if you want to add 3.1 TB LUN first upgrade ESX hosts to version 5

  • Cannot add the new top of mask

    Hey guys,.

    I try to add my layer mask using the sdk, but I can't make it work right!

    Here is my code,

      AEGP_MaskRefH maskItem;
      A_long maskIndex;
      AEGP_StreamRefH maskStream;
      AEGP_StreamValue2 maskStreamValue;
      AEGP_MaskOutlineValH outlineValue;
      AEGP_VertexIndex vertexIndex = 0;
    
    
      ERR(suites.MaskSuite6()->AEGP_CreateNewMask(*layer, &maskItem, &maskIndex));
      ERR(suites.StreamSuite4()->AEGP_GetNewMaskStream(aegp_plugin_id, maskItem, AEGP_MaskStream_OUTLINE, &maskStream));
    
      A_Time time;
      time.scale = 1;
      time.value = 0;
    
      ERR(suites.StreamSuite4()->AEGP_GetNewStreamValue(aegp_plugin_id, maskStream, AEGP_LTimeMode_LayerTime, &time, TRUE, &maskStreamValue));
      outlineValue = maskStreamValue.val.mask;
    
    
      ERR(suites.MaskOutlineSuite3()->AEGP_CreateVertex(outlineValue, vertexIndex));
      AEGP_MaskVertex newVertex;
      newVertex.x = x;
      newVertex.y = y;
      newVertex.tan_in_x = inX;
      newVertex.tan_in_y = inY;
      newVertex.tan_out_x = outX;
      newVertex.tan_out_y = outY;
    
    
      ERR(suites.MaskOutlineSuite3()->AEGP_SetMaskOutlineVertexInfo(outlineValue, vertexIndex, &newVertex));
    
    
      ERR(suites.MaskSuite6()->AEGP_DisposeMask(maskItem));// dispose the mask item
      ERR(suites.StreamSuite4()->AEGP_DisposeStreamValue(&maskStreamValue)); // dispose the stream value
      ERR(suites.StreamSuite4()->AEGP_DisposeStream(maskStream)); // dispose the stream
    
    

    I add a new mask to my bed, but there is no top on it!

    What I am doing wrong?

    Li Zhiqing salvation!

    You're almost there (I had the same problem...).

    Once you have set the MaskOutlineVertices, what you have already done, you must always set the value of flows.

    Thus, line 31:

    ERR (suites. StreamSuite4()-> AEGP_SetStreamValue (aegp_plugin_id, maskStream, & outlineValue));

    See you soon,.

    François

  • Cannot add a new data store

    Let me preface this post by saying that I am an extreme noob to VMWare... Have only used MS HyperV in the past but looking to oust most of my hardware with VMWare on the recommendation of a colleague.

    On the problem.

    I have a server Dell PowerEdge 2900 with 32 GB of RAM and 8 TB of disk space.

    I installed ESXi yesterday and you can see my original data store, called "datastore1", which is only 325 GB.

    I try to add a new data store, but when I go to 'Add storage' in vSphere, select ' disk/LUN", the list is empty.

    I know I'm missing something, but don't know where to look.  What should I do to add a new datasore and subsequently more storage to my VMWare environment?

    DRM for all help!

    To add a data store storage must be allocated to the vSphere server.  There is also a size limit of 2 TB less 512 bytes per LUN for a vSphere.   Try a few small LUN and see if they appear as available when you add a data store.   I have included a link pdf maximum configuration for vSphere 4.1

    http://www.VMware.com/PDF/vSphere4/R41/vsp_41_config_max.PDF

    If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

    Twitter: http://twitter.com/mittim12

  • Cannot add the new nfs datastore

    Hello

    I would like to get some advice how to add a new nfs data store. Here are the steps I did:

    (1) I have setup a stand-alone ESXi 4 server. I configured the VMNIC0 with 192.168.100.1/24 IP with Vswitch0.

    (2) I have setup a NFS storage. The NFS share is file://\\192.168.200.2\share. I tried using a Windows laptop and I can access the share.

    (3) ON the ESXi server, I created another Vswitch1 with VMNIC1 IP 192.168.200.1/24. I connect my storage to VMNIC1. ESXi, I'm able to ping my storage 192.168.200.2.

    (4) I connect my Windows laptop (IP 192.168.100.2) to VMNIC0. I am able to Vsphere Client to the ESXi server.

    (5) using the Vsphere Client user interface, I click on 'add the new data store '. The fields that I get are "192.168.200.2" and "share". I got the below error message:

    "Error while configuring the host: NFS error: unable to mount filesystem: unable to connect to the NFS server.

    What it went wrong?

    Kind regards

    Kent

    No claim, the NFS must be in the same subnet as your ESX VMKernel Port and your VI Client must be in the same subnet as the Console of the ESX Service / Management Port. But in many cases (especially with ESXi and if not configured otherwise) management and VMKernel are on the same Interface / subnet.

    Kind regards

    Gerrit Lehr

    If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

    Co-author of the German reference work on virtualization and VMware

    "Das Virtualisierungsbuch" - http://www.cul.de/virtual2.html

    Regular author on virtualization and other topics in the Magazine German FreeX IT in ass

    http://www.cul.de/freeX.html

  • Deleted my domain name and cannot add a new domain

    Hi all

    I deleted my name domain inside the admin panel and when I try to add a new domain I get this error msg...

    Error

    Domain already exists. Please delete all the records associated with this domain before adding it again.
    Can someone also tell me what the advanced DNS record is reason that I deleted that and have no idea how to configure it :-/
    Please, need help!

    Hello

    The problem here is that the domain has been locked for rebranding so cause this error and you unable to add the domain again.  I have since this rally so that we unlocked the renamed field and then wipe it clear so you can add the field in the site with all your DNS records applied normally.

    We will answer your ticket once solved case.

    Thank you for your patience.

    -Sidney

  • FDM - cannot add a new user

    Hi all

    Recently, we migrated to version 11. When you try to add a new user in maintenance by the user, a dialog box appears and prompts you for the user name. However, the next box "Username" is an empty combo box and takes no inputs. When click OK, the message "" error: Please select a username! "was received."

    Any suggestions, what can be the cause?

    Thank you
    T.T.

    FDM in version 11 uses shared Services for the provisioning of users. You only assign locations within the maintenance by the user. When a user is supplied with shared services for the application of FDM, on which they will then appear in the drop-down list box when you click adds a new user.

  • Satellite A210 - 27 M (PSAELE) cannot use the new wireless network card

    Hi all

    I changed my wi - fi for Atheros AR5b91 and hardware network card is locked.
    I can't remove this lock of wi - fi switch or fn + F8 probably it's the lock of the bios.

    I tried to unlock it on Windows Vista, Windows 7, Ubuntu, so it is not caused by software.
    I tried the card WiFi on another laptop (toshiba not) and it's ok.

    If anyone can help?

    Thank you

    Hello

    To me, it seems that you used is not compatible Wlan module.
    But I found this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=79237

    A user was unable to activate new update Intel Wlan card.
    According to some information, its possible to enable the Wlan card by covering pin 13 on the wireless Mini-PCI network card.
    But to be honest I've ever tried and I would use this workaround with caution.

  • How to configure HP ENVY 700 - 210xt to install the graphics card EVGA 650 TI boost.

    Can someone tell me how to install the graphics card EVGA 650 TI boost in the

    HP ENVY 700-210xt

    Product number: E9G99AV

    I replaced the power supply with Corsair RM 650 watt power supply that works very well. Now, I want to go to the graphics card EVGA 650 TI boost. Except, I can't get the driver to load with period of installed equipment. When I put the card into the PCI 16 x slot the computer starts with a blank screen. I pass the DVI video port old computer and the new port card white screen of same at startup. If I turn the PCIe port disabled in BIOS, it starts with the embedded video, but same thing impossible to load drivers that are not able to locate the new video card hardware. Makes me crazy! I don't know that I don't know how to configure the Bios correctly or something. Can anyone help?

    Hello:

    Please see my response to your other post on the link below.

    http://h30434.www3.HP.com/T5/desktop-hardware/how-to-configure-to-install-EVGA-650-TI-boost-video-car-in/m-p/3117171#M71438

  • HP ENVY 700-149 freezing several times (graphics card problem)

    Hi, I bought a HP ENVY 700-149 days ago and right out of the box it freezes several times every 10-15 minutes that it is in use.

    Indeed, it appears a little error box in the corner that says:
    "Display driver stopped responding and has recovered. NVIDIA Windows Kernel Mode Driver display driver, Version 311.41 stopped responding and has successfully recovered. »

    Sometimes this box appears several times in a row (quickly) and the computer continues to operate, but more often it pops up this message and then the computer freezes and must be stopped and restarted manually.

    In addition, it will crash occasionally to the 'blue' Windows screen with the message: "UNEXPECTED_KERNEL_MODE_TRAP" and the specific problem refers to "nvlddmkm.sys" which I googled and it has to do with the Nvidia graphics card as well.  The installed (from the factory) graphics card is a NVIDIA GeForce GT 635 with 2 GB memory DDR3 dedicated.

    I installed all the updates that are available for Windows 8 and have checked the Web of NVIDIA website for updates for the driver but nothing is available and the problem persists.

    Can I do to solve this problem?

    Hello

    Your PC is under warranty. Not to be with an intermittent problem with a new PC.

    HP support number is 800-474-6836 or 800-HPINVENT or online here.

    HP has a 21 day return policy.  After that, it's a warranty issue.

  • Need help to install a new discrete graphics card

    I had a desktop Pavilion p6101f, upgraded to Windows 7, with an integrated Geforce 9100 graphic card. I want to install a discreet card to increase a little things. The HP support instructions say that the first necessary step is to "disable on board and select the right setting in the BIOS" by going into the Setup (F10) immediately at startup, go to the Advanced tab and then select the type of card being installed, which would be PCI - E. Problem is, there is absolutely no sign of the graphics options in the advanced options, or a different tab in my BIOS setup screens. So, what gives? Can I just skip this step and go directly to step 2 - disable the integrated graphics card drivers before installing the new card? Or do something else? Any help would be greatly appreciated.

    Thanks for the clarification. Your correct, it is just to delete the previous drivers and installing the card, then the software from the CD of EVGA. To 31W of power, the card has doesn't require any power plug (s).

    I send you a link to theManual

Maybe you are looking for

  • pandian1965

    Wireless does not work under ubuntu 12,04 LTS installed in 2207TX for laptop HP laptop Pavilion G6 model but work wireless works in windows 7. Please inform the procedure to correct the problem in Ubuntu. Thanking you Pellen

  • Creation of license with VLM usage report

    Hello world is there an easy way to create a license using the VLM usage report? We have a bunch of licenses based on the name used by several departments, but the actual allocation of the PFR may vary during the year. What I would like to have is a

  • A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore

    A refurb Lenovo/IBM PC windows 7.0 SW, software code does not work for charging SW after a system restore. How can I get a new one

  • IKEv2 VPN without using licensed SSL? (ASA-5512)

    Hi all I enabled Cisco 'Anyconnect Premium peers' for customer less connections vpn ssl, the obvious snag is that for Anyconnect ikev2 sessions he wants to use the SSL license pool instead of the IPSEC pool (which I have a lot of connection for 'peer

  • Failed to export the virtual machine. Help please is urgent!

    Hello guys! I need your help.I tried to export a virtual machine in the .ova file but I got this error.So to start export didn t and it showed only in the taskbar without effect 'in progress'. Does anyone know how can I solved this problem?I would ap