HP 7760 asking for calibration of printer when I turn on
I checked on one of your previous post on with someone who had the same problem I encounter that the only thing is that when I checked my sensor was out and there was also a sping at the bottom of the printer is possible for me to give back, and exactly where it comes from.
Thanking you in advance
Hi @caribbee
From the symptoms you are experiencing, it seems that the hardware is now broken. I suggest to call telephone support to see if they could offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.
You may be able to find a local MOM and pop shop who could fix the printer, but HP did not all stores authorized service that I could recommend.
Tags: HP Printers
Similar Questions
-
Ask for help with printer inherited
I want to get a printer networked - is no longer supported by its manufacturer - to print over wifi, ethernet or less direct by USB. Indeed, one of our two iMacs can print it by USB (only). The problem is that the other cannot, if directly connected by USB or share from the first iMac. I get an error message that the printer is not connected.
Drivers installed on both machines seem to be the same, Brother_HL_2170W_series, into the 4.5.0 version numbers.
The printer is a laser 2007. It ran fine on ethernet and wifi until I put the two iMacs to Mountain Lion. At this point if I ever turned off it would fail to reconnect when turned back on. It was once possible to make one kind of reconfigure by typing its IP address in the URL of a browser bar and then goes to a Brother's Web page. But the IP address of links is more to his brother, as I discovered after accidentally unplugging the printer this week. Can I not run the original CD-ROM, which includes a configuration utility.
I'm still in the OS X 10.8.5 (the last OS to fully support my FireWire hard drives) and suspect that a new update would help little for a legacy printer. Not the end of the world if I have to buy a new printer, but I regret that throw one that is mechanically correct.
Suggestions appreciated.
I'm sure that Printopia decisive tactics can meet your needs. Call them and describe your needs. We use it in a similar setup and it works fine.
-
Screen of HP Pavilion 15 turn off for a few seconds when I turn on or off charger
Hello
I bought new 15 hp Pavilion. I noticed several times when I turn on or turn off my charger, screen off for a few seconds and then after a few second screen turned on. Please help me its furstating me.
> It is customary, and in this case necessary to provide you with the exact model of Notebook, you have a problem - with. [There are MANY variants of models of HP Pavilion 15 - T, for example.]
> You should always be sure you have installed/applied all updates for all the hardware devices on your laptop, and all THE updates of Windows marked '' Important '' and all updated Windows "optional"-section for any hardware device in your laptop including service updates Windows detects (and offers an update). "."
> For example, this link: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=678785 has the latest HP drivers and patches for a specific variant of the Pavilion 15-T.
> AFTER you are certain that you have all the latest drivers and patches on the spot, you can try the 'old trick' as follows: stop Windows; When your laptop is turned off completely (after complete closure), THEN remove the connector of the AC adapter / CC and remove the battery.
> Hold DOWN the button of power without interruption for a full 60 seconds. Then replace your battery in your laptop. Do not connect your power adapter. Turn on the computer laptop and logon in Windows. Check the settings of control Panel\Power Options and know the level of your battery Charge. If it is less than 25%, then (and only then) plug in your adapter and connect it to your laptop... and leave the charge the battery up to "completely" to the level of 98 to 100%. * Note: If your card has a removable cord AC connector, make sure that the connection is "tight".
If you still think that your adapter is defective, GET a NEW one! Damage a laptop for $400 - $800 is NOT worth it, compared to the cost of a new adapter. > Use the built-in help of your laptop on how to DISABLE (!) "Hibernation" and eliminate this CAUSING trouble 'feature' in Windows PC. When you did, always restart Windows, to be sure, the changes are applied. Many changes and take 'Entirely' product updates only "for" stop or "during" startup of Windows PCs. [while Windows O.S. 'turns', most of its system files is LOCKED].
> FYI: let always your battery run down to him below highlights you plug in your sector/charger adapter. Charge a rechargeable battery 'medio-load-levels' causes shorter battery life...
-
Windows has asked for the same activation when I did
So, I bought a Dell computer with Windows 7. Recently, I tried to install Windows XP Mode, and they keep telling me to install Microsoft Genuine. I install but the site won't let me download Windows XP Mode. They said he failed and redirect me to to buy genuine Microsoft Software Web site. I did not, but on the page, they show a few ways to activate Windows. I followed it by clicking 'activate' in the start menu > search. There is activate Windows so I click on it. Because they required the product key I just close the window. But after the restart, screen blackout curtains and the activation window appear saying activation has expired. After clicking on cancel, I check in my computer > properties and see that Windows is activated with the product ID. I don't want to turn on the computer every time to see a window and cancel it. Also, I don't know where is the product key on my computer (it's a Dell Precision 390 upgrade of Windows XP). Those who know how to solve this problem?
I suggest you try to get a satisfaction of the seller. (threats to involve the application of the law for fraud can help)
the retail price for a full version of ultimate is about $319,00the only other choice is to buy a genuine windows. family premium is $199 price but I see that some legitimate retailers are discounting about $170,00You can try to get a your manufacturer OEM xp recovery disk if they have yet. -
"(kay, je ne sais pas quel est le problème, mais j'ai quelques théories: 1) I sent a set of images slap to my"[email protected]"email account (I use e-mail to contact you because I can't go on my main email)." The account that I signed up with is '[email protected] '. Both accounts have exactly the same parameters, but the works of tvqueen13 and monarch is not. Maybe I stuffed up the e-mail account of the monarch? If so, how can I solve this problem? (2) I also have good Emsisoft Anti-Malware and AVG security 2014 (purchased, not free), but somehow got a rash of infections of Trojans (IE. TrojanHorseInject2.BJPG & BJPP, TrojanHorseMSIL6.UOM, MSIL4. ALBK). I have worked with Emsisoft to clean my computer, but no matter what tools I use, AVG always says that I have an infection (or more) in my temporary files. I had to uninstall AVG to run something and not him have not yet reinstalled. Emsisoft said I'm all good, but I do not. I get adware diverting my sites too. I'm at the point where I think I'll have to swap on my C drive. Then... you can help me get my email [email protected] to work again? Thank you, Kelsey monarch
Oh and connect to the Webmail to shaw and move one of those large emails talked you in the beginning on a different folder on the server. Moving them to the Inbox will be unlock download new messages, if this is the cause.
-
Why do I get a window asking for a new serial number or turn off a computer?
I subscibed to creative cloud a week ago and have yet to use it. After the download and installation of Photoshop CS6, I am unable to open the program without a window to disable a computer or provide a different serial number. Why this is happening and how we can solve this problem? Help! I have some work to do. Thank you.
Refer to this:
Connect you or activation errors
Mylenium
-
Network printer ask for a password before printing
I have a windows 7 and windows 8 computers on the network through netgear. I share 2 printers that are connected to my computer windows 7. no sharing of password and network sharing is enabled on both. Print from the computer of windows 8 and everything works fine for a while and after a few days, I'll try and it will ask for a password and when I go to devices and printers in Control Panel and try to look at the properties of the printer (or the other), he will say: access denied. I have remove the device from the computer of windows 8, restart and add the printer before it will let me print. But today, it will not work. I need help.
Hello
Welcome to the Microsoft community forum. Let me help you with your concern.
The computers are connected to a domain?
You get the error message?
When you try to print to a network printer that requires identification of trusted information, or when you try to view the properties of the network printer, the following error message may appear: Access Denied.
In addition, you may not be able to save a password for the network printer after have connected you to the printer.
This problem may occur if you do not select the Save password check box when you connect first to the printer on a network that uses approved connections.
Run the printer utility. A convenience store is an automated tool that can find and automatically fix problems with your PC. ThePrinting Troubleshooter can solve the problems with the installation and connection to a printer.
To resolve this issue, remove and then reinstall the printer via device and printers. When you first connect to the printer reinstalled and must enter credentials, click to select the Save password check box.
Add, remove, and manage your devices and printers
http://Windows.Microsoft.com/en-us/Windows-8/Add-view-manage-devices-Printers
See also this article: solve printer problems
I hope this helps. If you need help with Windows, let us know and will be happy to help you.
-
LaserJet P1102w: Double-sided printing will not turn off
Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing. So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.
How can I get this fixed?
Hi @Skunkeeper,
Welcome to the HP Support forum.
I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.
This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.
Please let me know if that solves the problem, or if you need assistance.
In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.
Thank you!
-
Firefox keeps asking for password when I send emails
Firefox version 35.0. When I open Firefox and do pass on messages, no problem. When I write an e-mail and send it, Firefox asks me password. I am able to send and receive e-mail while open. If I close Firefox and open, it ask password when I send. Months ago, I changed my password to connect to Netzero.com (which made more secure). Since then, I had this annoying password request. How to satisfy the password login server for receive/send emails?
Is it asking for the password, or the web site of Firefox? The only time that
FF you will be asked a password is if you have the active master password
in the Password Manager.Open the Password Manager. There is a search bar on top of the
page. Enter the name of the site. Press the button view passwords.
What's the correct information? Note: maybe more then one entry there.Left on the icon in the address bar. A display of site information window should appear. Select more information. At the top of the window, select Security. Now select passwords saved view.
-
My SMTP server Govind always ask for a password when I send the mail, why?
I receive email fine. But when I try to send an email on the Server SMTP Out going for a password. I put a password when I change the configuration server. But it still for a password for each outgoing mail. This problem, I first noticed around Nov 17 14. It was just after a few dates for Thunderbird.
I NEED HELP PLEASE, WHAT IS THE SOLUTION TO THIS PROBLEM?Next time it asks for a password:
- Enter the password
- Select the check box to "use Password Manager to remember the password."
- Then click OK
-
MY 7th generation nano has his music to wipe and start again. I tried to restore it in the air several times because it won't let me not in reason to ask for a password to allow this. the password is not my iTunes password. can anyone help? I use an iMac.
Once the iPod appears in iTunes, it shouldn't be a problem with a password for an iPod nano 7th generation. If you see a window pop up asking for a password, I think that it is a request for authorization from the Mac OS. It is not directly related to the iPod or iTunes. He asks your password for the account of the user admin (for Mac), as when you install the new software.
-
My apple ID is set for my ID, but when I try to update my apps it asking me password to another email?
These applications were probably acquired by using a different ID to Apple.
-
Normally, when I log on my Mac, I have a log in and then I have my counter top. I suddenly tonight, another newspaper in the window, and it asks for a password, I didn't create, so cannot go beyond that window. Anyone know what it is?
This window appears before or after the usual? What is it exactly?
-
in some progaram, as Facebook GAMES, when I have to go to an another screem or ask for assistance to complete a task. the screem never continue or complete. What can I do to fix this?
Hi Dene Dixon,
· You receive an error message?
· Did you the latest changes on the computer?
· What web browser do you use?
If you use Internet Explorer, I suggest you to try the steps mentioned below and check if it works.
Step 1: Follow the provided article.
http://support.Microsoft.com/kb/308260
Step 2: Follow the article provided to enable compatibility view in internet explore.
-
You need to unplug the 10 pro printer when you print not for days or weeks?
You need to unplug the 10 pro printer when you print not for days or weeks?
ebiggs1
Thanks for your reply.
Maybe you are looking for
-
Satellite A-P50-12PNL - after Win8.1 upgrade cannot create the system image
After updating my laptop Satellite P50-A-12PNL to Windows 8.1 I can't create an image system (copy). The message: +"There is not enough disk space to create the volume shadow copy on the storage location. Ensure that, for the volume to be backup upwa
-
How to disable the Windows 7 startup splash screen
After that the PC starts the "sign-in" screen comes up. Click and go to the desktop and the program of your choice. If reading or not active on the keyboard or the mouse in about 15 seconds the start screen comes back. All view timers are defined for
-
Items on the Start Menu will not stay
I tried pinning of items in my Start menu but they pine to here. I tried dragging them, by sending them and looked and tried my best stay for my start of menu items. Can anyone help? My system Windows XPMedia Center EditionVersion 2002Service Pack 3
-
I am trying to open a pdf attachment & getting 'Not found MSVCP71.dll' how to fix this?
I use AOL and the attachment is a PDF file... When I opened the attachment, I get the error message and don't know where to begin to fix this problem. Thank you
-
Non-functional processor DV7 - what a graphic problem?
Hi all Edit: I think that it maybe the wrong section for this so I she published more than crash & block but since I saw some views on this one, did not delete in case someone was following this so leave it here for now. Administrators can remove if