HP 8000 CMT: ASUS Xonar DX 7.1 connector Molex

The Molex connector that plugs into the card is a 4 pin "masculine."  Number one, it's too short, I need a SATA adapter.  What and where I can order this card?  I find all kinds of molex male, but no female.  Earle


Here are a few cards.

Tags: HP Desktops

Similar Questions

  • Problem with the ASUS Xonar DGX

    So, first of all my problem is my sound is playing is no longer sound, and this started when I turned off my ASUS Xonar DGX Audio Device in Device Manager and reactivated it. I did this because whenever a game would break it would play a buzz and before today which can still fix this. I tried to restart my computer and do a boot minimum but before I did a clean boot, everytime my computer turned back, it says that windows could not find UpdateTool. I have ran virus scans with 3 different readers and not find anything, can someone help?

    I should also mention that in my sound mixer, is showing the green light that she is out of her, but I guess I don't get it.


    Try the article provided to solve the problem.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Tips for solving common driver problems


  • No sound on Asus Xonar DS (card high school) after waking from sleep/hibernate. Restarting doesn't help not.


    First timer on the forums of Microsoft here. I am running Windows 64-bit Preview version (test the waters a bit before buying an upgrade) - and I currently have a problem with my sound card, Asus Xonar DS which is not channeled sound to, apparently, or is blocked by something, after that the computer woke up from his sleep for the first time. For the record, I have Xonar DS version of the driver installed (Windows 8) and it worked perfectly to 192 000 Hz. Default 44100 worked well, too. First map of sound, integrated into the motherboard, works very well and is channeled according to that sound. That is, there is a very good reason, I opt for the Xonar DS - sound quality - and for this reason I am not using Windows 8, if the problem persists.

    Has anyone had a similar problem with Windows 8? Previous versions of Windows? Any ideas what could help? Thank you.

    This can be marked as resolved, at least for me. Seems that the version of Windows 8 of the pilot comes * with * install custom that were not present in my Windows 7 - software the DS Xonar Audio Center. 'Analog Out' is the section that needs attention - just try it and the switching noise is expected to return after a try or two.

    Sleep should not be affected, but at least I am happy that a solution must be found not far away.

  • Map its ASUS Xonar DGX and Adobe Premiere Pro.


    I bought an ASUS Xonar DGX soundcard. I'll work on audio especially with a good headset.

    What technical considerations should I consider if I want to advance and and edit audio in first and other Adobe programs?

    I read something on the Adobe system requirments and map its compatible with ASIO or Microsoft Windows Driver Model Protocol, but it was not very clear to me.

    There are people who say that the Asus drivers are not the best and they recommend using third-party for asus xonar dgx to get drivers for best results. But they will work with Adobe Premiere?

    How can I make sure that Adobe Premiere will make use of my sound card?

    (technical info here: http://dlcdnet.asus.com/pub/ASUS/Audio_Card/Xonar_DGX/E7798_Xonar_DGX.pdf )

    Onboard Audio Chipset Realtek ALC892

    (technical info here: http://www.hardwaresecrets.com/datasheets/ALC898_DataSheet_0.60.pdf )

    Occurs a dedicated audio card for best results that the Audio Chipset shipped?

    Thank you!

    Thanks ECBowen!
    I don't plan to record sound using my computer. I just want to have the best possible sound quality when editing video or audio. Be it creation or hearing. As far I knew Asio drivers are used to reduce the lantency when recording audio.

    I'll use anyway pilots Asio?

    Thank you

  • Tecra 8000: what name has the HARD drive connector?

    I need the name of the connector Hdd in Tecra 8000.
    Who can help me?

    Oxford Chris


    I found the info Toshiba has delivered two different Tecras 8000. Can you please write exact number of sticker for laptop? It must be something like Tecra 8000 (PAT80AE-xxx).

    It will be perhaps easier to identify which HDD is on the inside.

    Good bye

  • Connection map its Asus PCI-E SUPPORT

    Hello.  I have a Dell XPS 8500 amd I want to connect to my new card, the Asus Xonar Essence STX.  There are 2 PCI-E slots, but the card has a connector 4-pin & I see no power cable 4 pins from the power supply.  What can I do?

    The Dell XPS 8500 Creative Sound Blaster Recon3D, this is the card I know works. SB1350




    Recon3d SB1350 so the Dell guy offers as an Option.

    The version of Dell looks different than generic.

    Map of 70SB135000000 from Dell is designed to work with the audio jacks included when you get the appropriate cable.  I think its yellow cable.

    Don't know the part number for the cable. If you get the right card I think to that disconnect from the motherboard. Disable audio in the bios and connect to the recon map.


    NOTICE how the detail map has several pins of the card from Dell.

  • Audition 3.0.1 xonar d2x win7 32 bit only no sound while recording

    Hello, I use:

    -Audition 3.0.1

    -Windows 7 32 bit

    -Asus Xonar D2X (latest drivers installed).

    All I want to do is record line and save it in a file so I'm using the view Edition only. Xonar D2X uses ASIO drivers so pilot installation of the audio of the hearing is set to use "Xonar D2X ASIO" with default of entry ' IN-00 [01 f] ' (stereo line) and exit by default 'L [01 f]' (speakers) selected. The most funny thing is when the sound is the record I can't hear the sound from the speakers (Audio hardware settings are configured correctly). But while playing, everything is OK. Do you have any idea what's going on? Looks like hearing trying to sound sned out of different...

    No, what you describe is perfectly normal. To get a direct supervision, you must configure your audio device while recording, there is a direct feed between the input and the output. It is quite possible to get the hearing to monitor the entry and feed it to the exit, as well in multitrack view, but there will be additional latency because the sound should resume a path through all the software and return to the sound equipment. And it's only available in multitrack view - in edit mode, you must use the direct route through the sound monitoring device; There's no other choice.

  • BSOD problem error bug check code is 0xd1.

    Original title: BSOD issue.


    I'm having consistent BSOD issues and have not recently installed new hardware other than a new keyboard. Might help you to check what the problem is please?

    minidmp files have been downloaded below

    https://onedrive.live.com/redir?RESID=3F8A3757B75723FF! 275 & authkey =! AJLWy31mgYj0vXE&ithint=folder%2c.rar

    Thank you for your help.


    These accidents were caused by the cmudaxp.sys (description of the driver below.)  The bug check code is 0xd1.

    The debugging session: 20:46:57.022 Sun may 4, 2014 (UTC - 04:00)
    System Uptime: 0 days 1:17:13.657
    Loading the kernel symbols
    Loading user symbols
    Loading unloaded module list
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *

    Use! analyze - v to obtain detailed debugging information.

    BugCheck D1, {fffff86c052b3410, 2, 0, fffff88005298e8b}

    Failed to load image \SystemRoot\system32\drivers\cmudaxp.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for cmudaxp.sys
    ERROR: Module load completed but symbols can be loaded for cmudaxp.sys
    Probably caused by: cmudaxp.sys (cmudaxp + 1c0e8b)

    Follow-up: MachineOwner

    0: kd >! analyze - v
    *                                                                             *
    * Bugcheck analysis *.
    *                                                                             *

    An attempt was made to access an address pageable (or completely invalid) to a
    application interrupt level (IRQL) that is too high.  It is usually
    caused by drivers using a wrong address.
    If the kernel debugger is available, get a stack backtrace.
    Arg1: fffff86c052b3410, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff88005298e8b, address memory

    Debugging information:

    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff802b1bc6168
    Unable to get nt! MmPoolCodeStart
    Unable to get nt! MmPoolCodeEnd


    cmudaxp + 1c0e8b
    fffff880'05298e8b ff9080000000 call qword ptr [rax + 80 h]




    Nom_processus: chrome.exe

    TRAP_FRAME: fffff802b0d7e700-(.trap 0xfffff802b0d7e700)
    NOTE: The frame trap does contain not all registers.
    Some registry values can be set to zero or incorrect.
    Rax = fffff86c052b3390 rbx = 0000000000000000 rcx = fffffa8003c103e0
    RDX = fffffa8003c43130 rsi = 0000000000000000 rdi = 0000000000000000
    RIP = fffff88005298e8b rsp = fffff802b0d7e890 rbp = 0000000000000080
    R8 = 0000000000000040 r9 = fffffa8003c5eaa0 r10 = fffff880052b59f0
    R11 = fffff802b0d7e948 r12 = 0000000000000000 r13 = 0000000000000000
    R14 = 0000000000000000 r15 = 0000000000000000
    iopl = 0 nv up ei pl zr po nc
    cmudaxp + 0x1c0e8b:
    fffff880 "05298e8b ff9080000000 call qword ptr [rax + 80 h] ds:3500:fffff86c" 052 b 3410 =?
    Reset the default scope

    LAST_CONTROL_TRANSFER: from fffff802b18ea369 to fffff802b18eb040

    fffff802 'b0d7e5b8 fffff802' b18ea369: fffff86c' 00000000 0000000 a ' 052b 3410 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
    fffff802 'b0d7e5c0 fffff802' b18e8be0: 00000000 00000000' fffffa80 '03c103e0 00000000' fffff802 00000000' b0d7e700: nt! KiBugCheckDispatch + 0 x 69
    fffff802 'b0d7e700 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0 x 260

    STACK_COMMAND: .bugcheck; Ko

    cmudaxp + 1c0e8b
    fffff880'05298e8b ff9080000000 call qword ptr [rax + 80 h]

    SYMBOL_NAME: cmudaxp + 1c0e8b

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: cmudaxp

    Nom_image: cmudaxp.sys


    FAILURE_BUCKET_ID: X64_0xD1_cmudaxp + 1c0e8b

    BUCKET_ID: X64_0xD1_cmudaxp + 1c0e8b

    Follow-up: MachineOwner

    0: kd > lmvm cmudaxp
    start end module name
    05406000 fffff880 '050 d 8000 fffff880' cmudaxp T (no symbol)
    Loaded symbol image file: cmudaxp.sys
    Image path: \SystemRoot\system32\drivers\cmudaxp.sys
    Image name: cmudaxp.sys
    Timestamp: Sat Apr 11 06:45:54 2013 (51669462)
    CheckSum: 002A485F
    ImageSize: 0032E000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

    Driver Description: C-Media Audio Interface Driver (WDM) C-Media
     Interface driver Audio ASUS Xonar DG
    HTO CLARO Audio Interface Driver

    Driver update site: http://www.cmedia.com.tw/EN/DownloadCenter_Detail.aspx?pserno=0&dtype=ALL

    Uninstall and reinstall after a repair KB2862330, noted below.

    Please delete Hotspot shield.
    ERROR: Module load completed but symbols can be loaded for hssdrv6.sys
    WARNING: Unable to verify timestamp for taphss6.sys
    ERROR: Module load completed but symbols can be loaded for taphss6.sys

    Driver Description: Hotspot shield
    Cause possible BSOD seen in mid-2012

    Driver update website: http://hotspotshield.com/
    Please remove immediately update utility. This software is problematic and may corrupt your system

    Unloaded modules:
    fffff880 ' 17747000 fffff880' 1774f000 TuneUpUtilities
    Timestamp: unavailable (00000000)
    Checksum: 00000000
    ImageSize: 00008000

    Check updates systems installed to KB2862330. Is it installed?

    This security update was initially released on 8 October 2013. The security update was re-released on January 14, 2014, for computers that are running Windows 7 Service Pack 1 (SP1) or Windows Server 2008 R2 SP1. The reissue resolves an issue in which one of the pilots of the stack kernel USB 2.0 is not updated in some specific computer configurations.


    Note: compare the versions of your file in the link above. I suspect you've found BCCode 0xD1 due to improperly installed or missing update.

  • cannot fine internal power supply form new sound card

    Just installed the asus xonar dx card in my slimline s5670t office. The problem I have is that I can't find the power supply 4 pin I need on the mobo. Can someone help me?

    Here are thespecifications of the motherboardof your PC.

    You probably need to look for a connector 4-pin molex or floppy disk which cuts off the power supply.  If your don't see a spare connector, then you will need an adapter for the splitting of a molex connector or even disable a sata power connector.  Look carefully at the power cable goes on the hard drive.  That's where you could try a power cable Y splitter.  www.Newegg.com has probably want you need.

    Maybe thisadapterwould work.  I can't tell if the connector is good to type the disk sata for power or if the cable lengths are long enough.

  • HP 450-101nf: feed an its hp 450-101nf pci-e card


    I have a HP 450-101 n (3.7 Gz i3, 4 GB ram, 1 slot pci-e x 1, 1 pci-e x 16 slot) and I want to connect to a map its asus xonar dx, but this map requires a separate power cable and I have not seen one inside my office.

    Is any possibility of feeding this sound card?

    Thank you!

    Leon, welcome to the forum.

    You would have to separate one of your power with adapter cables 'Y '.  I suggest you contact the ASUS Technical Support to determine the exact type of the adapter you need.  They should be able to help make the choice.  In addition, they would be able to tell you if it draws too much power for you to external power supply 65W.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Skype crashes when I open the options settings

    Whenever I have try and no matter what on 7.24 it won't do anything and he'll plant rather Skype, when I try to modify the microphone and headphone, it said 'Skype has stopped working' followed by 'a problem caused blocking the program works correctly. Windows will close the issue and notify you if a solution is not available", this has only started in the last 2-3 days, but she did Skype completely inept, I would really like a solution because I can't use Skype until it changes

    First try to update your ASUS Xonar DS Audio Device driver to the version compatible with Windows 10.


    Your currently installed driver comes from the time of Windows XP (ver. 5.12.0001.0008). Version 10 of Windows is

  • Update Windows 10

    I read a bit on Windows 10.  Looks like it will be a solid operating system.  For me, Windows 7 is an OS is worth it.  I use it at work and at home, and he replaced Win XP that I liked.  On the other hand, Windows 8 simply had me looking for ways to do things on a Windows computer I could do before.  I found most but what a pain to do certain things.

    I bought my 10 Omni so that I could stay up to date with the world of Windows and I love my small tablet.  He does everything and does well to win 8.1 rocking

    That being said, I'm pretty excited to be able to upgrade to Windows 10 when it will be available some time in 2015.  I hope that my 10 Omni, with its 64 GB of space will be able to upgrade to windows 10.  I've been judicious about what I have loaded directly on the device and have 28 GB left.

    You think I'll be able to upgrade?


    It is all down to the drivers.

    If you have a surefire way to restore W8.1 on your PC (recovery discs, flash drive, stored on a portable HARD drive recovery W8.1 image), you can test the W10 Technical Preview right now and see how it works.

    I currently do on my HP 8200 Elite CMT, which was designed for W7.  I upgraded to W8.1 and test W10 Technical Preview on a spare hard drive.

    So far, I got a distress plan.  Everything works very well as he has been using W8.1.  I had to install two drivers - one for the Intel AMT hardware (just found on the PC business) and my Linksys AE3000 external (two drivers installed using W7 drivers) wireless USB adapter.

    I also tried on my old HP Elite 8000 CMT, who was also running fine using W8.1.

    However, the PC will be released no mode 'sleep' with W10 Techical overview using the keyboard or the mouse.  I have to press the power button, close and cold boot the PC.

    I reported the bug to Microsoft and they are aware of this problem on some PCs and are working on a fix.

    Meanwhile, I've restored the 8000 back to W8.1 using the built in recovery tool of W8.1 image and W8.1 repair flash drive (which allows to boot the PC and find the recovery image on the laptop hard drive).

    Restore was successful.

    If you are interested, you can get the installer from the link below.

    Just make sure you use a spare hard drive as I did, or have a way to put the W8.1 on the PC (also as I did).


  • HP Compaq 6000 SFF Elite: Very good Sound Card

    This desktop PC HP Elite 6000 has a very bad sound system, and it must be replaced with a very good sound card.  I have two good speakers powered by USB, I use, but I need a sound card.   I have two slots... A 2.5 PCI "low profile card.

    length 6.6 "power max. 25W and a PCI Expressx1 half height length 6.6" max power 10W.

    So, which card its somone recommend here?

    Dear customer,

    Welcome and thanks for posting your question on the Forum from HP Support.

    Its recommended and its low profile card:

    StarTech PCISOUND5CH2 card PCI one Surround sound 5.1 CH 8738 LX adapter + Low Profile

    ASUS Xonar DG 5.1 its PCI card & headphone amp compact support Inc.

    WELL, Creative Sound Blaster Audigy SB0570 PCI 24 bit Sound Card 7.1 LOW PROFILE

    StarTech 4 Channel Low profile PCI Sound Adapter Card PM28738-2X2A PCISOUND4LP

    Hope this helps, for other queries in response to the post and feel free to join us again.

    * Click on the white button on the right to say thank you Thumbs Up *.
    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you
    Although I am an employee of HP, I speak for myself and not for HP

  • Cubase gives error fault FF9-5-0044 [8878000-a]

    ASUS Xonar DS PCI Sound Card

    ASIO Direct Sound Driver Full Duplex

    Fault FF9-5-0044 [8878000-a]

    It is an error message that I receive from Cubase Essentials

    I've never been able to save on this computer

    It was big let down, I don't know what to do

    Help, please

    Hello Carol,.

    Did you check you have the latest driver to map its installed for your its ASUS Xonar DS PCI card?
  • Media issues on Windows 7 64-bit

    Just finished building a HTPC and installed windows 7 64-bit.  Have several problems with the media.  Media player does not open.  Media center opens and reads the DVD / CD but does not tear.  Responds with "Audio error.  The CD could not be torn. Restart media center computer.  Tried to download Media Monkey but after getting through two first guests to allow downloading, simply disappeared.  Was first successful download Jaangle but after a restart of the computer, he become too insensitive.

    NetFlix is also not respond.

    Any thoughts?

    Have material suite:
    ASUS M4a785TD-V-EVO
    AMD Phenom II x 4 945
    G Skill DDR3 1333 4 GB
    Map its Asus Xonar Essence ST
    WD Green 1.5 TB caviar
    Blu Ray LG player

    Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • This memory has been properly installed.

    I have a dell dimension desktop computer.  I recently added memory to the computer.  The user manual says that, if the memory is correctly installed, you should be able to see when you check the properties of the C drive. However, when I check the pr

  • F3507g cannot reconnect

    Hello I have a SL300 with the added F3507g module. I have a new 3G of MTN, one of our providers sim card the in South Africa. I could not make the connections for access to establish a connection. He will be sitting almost idle for almost 30 seconds

  • How can I get a real jpg or gif image is displayed in thumbnail view in Win7

    Just upgraded to Windows 7 and there is no miniature display in Explore, just the views ICON.

  • How can I add to tax Australia for Windows RT?

    Original title: E tax Australia Tax time that I want to download the tax program be Australian Taxation Office. But it does not adapt to the Surface of RT. You can do something to help. I've only had this Rt of Surface a few months and it's going to

  • Lightroom serial number

    "' I need help and can't go back to 'in the page accounts Adobe '.There is no evidence that when I followed the link.Can you help me to find the serial number for my Lightroom.If you can contact me on mail: personal information removed by staff >Conc