HP 810 G3 revolution: HP revolve 810 G3 impossible to image,.
Try to image the G3 810 via SCCM 2012r2, injected I217 Intel(r) connection Ethernet-LM c. 12.12.80.19 to support start-up, but every time I get "cannot find a valid network adapter."
Here's the smsts.log file:
I have them form HP: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7429243&swItemId=ob_147677_1&swEnvOid=4158 Once you download this, you can use winZip, 7Zip or your choioce of utility to decompress. Once unziped, there will be a setup.exe and a "Flat" folder Each (64/32 bit) operating system is in the flat files - divers only. Tags: Notebooks Make it dependent on forms on others - how to Hello! I am glad that I found this forum. I would like to know how to make a form that depends on the other. This means that if I'm going to change one, the other also changes. Please see attached illustration (howto2.jpg). 1 b and 2B are created from 1A and 2A, respectively, using the same method (turning around one of its 45 degree angles and copying form an entire revolution). In other words, the b-images consist of eight a-images. 2A is a rather boring picture, but intressting effects occur when the original shape (1A) is modifed and the same method of rotation is applied. The problem is that it is a lot of your time repeat the method each time I change the shape of the original. That's why I wonder if it isn't a function in Illustrator to save me from this time? A witch of function allows me to see changes in the 1 b just by changing 1. Thanks in advance, Ten_du Create the form open the symbols make Panel drag art or form for the symbols Panel shape is now a symbol that you can place as amny as you want to the document or the artboard (s). Then when you want to change it you double-click any instance on the canvas which will bring you in isolation mode and change when you double click outside of the area of the work, you come out isolation mode and the symbols in the Panel and on the Web will be updated accordingly. If there is one or more symbols you want to update, and then you can break the link in the symbols Panel. BTW the symbol can be of several forms, it can be an entire work of art or a group of shapes. Very convenient. Say that you do windows you do one then just add it into the symbols Panel Hello I recently my elitebook revolution 810 (Gen1) upgrade Windows 8.1. Because the power supply fan continues blowing most of the time I have also upgraded to the latest version of the bios (f47). Now I have more features of the tablet on the device. This means that (when the screen is shot in the style of the Tablet) keyboard on screen no longer appears and the screen turns is more. As seen on the thread: t5/Notebook-HP-ProBook-EliteBook/HP-Revolve-810-G1-Windows-8-1-Screen-Auto-Rotate-doesn-t-work/td-p... Any update on that? New drivers or new version of bios are available? gindh Please check the drivers and install .NET Framework 3.5 reboot and run Windows Update http://support.Microsoft.com/kb/2785188 Install the new BIOS F48 Revolve 810 G2 Executive pen does not work Hello Revolve 810 G2 / Windows 8.1, all updates (Microsoft and HP) are carried out. Pen is not recognized. I can't find any driver associated with feather on the HP page turning G2. What I've read, the Pen 'pen tablet HP Executive R1' reference must match a G1 not turn a G2. Is this correct? Although this pen would work with a G2 810 or pen is dead on arrival, or a driver issue? I read a lot about the customers disappointed on the pen of the revolution, when they compare themselves to the generation 2740. G2 solved this? Thanks for your help, Jean-Jacques Please see the troubleshooting of pen and calibration http://www.HP.com/United-States/HP-Executive-tablet-pen-whitepaper.PDF Replace the battery For the G2 to test the new PEN HP Executive Tablet Pen G2 "Write messages and notes in your own handwriting directly on your HP EliteBook turn 810 G2 [1] screen. http://h30094.www3.HP.com/product.aspx?SKU=10754734&mfg_part=F3G73AA&pagemode=CA revolve 810 will not in tablet mode I have a HP revolve 810 G1 which won't in tablet mode. Someone at - it ideas why this would be or if it's just a setting that should be adjusted? Thanks for your reply, but the problem seems to be updates BIOS F.47 day & 8.1 of Windows that have been installed. I found some messages from users having the same problem and when I went down the BIOS to version F.44, when everything started to work. I hope HP fixes this problem with the next update of the BIOS. Revolve 810 8.1 Windows drivers? There are 8.1 drivers available on the HP Support driver download site, why not SDM? Turn my 810 is a year - old why can't it be updated to 8.1? Control of the HP Update site Web says that it "has not been tested"? Let's go!!! Russell Please refer to the FAQ 28 in our forum and read #3. It would seem that you have are filtering in your configuraiton of 8.1 Win. Elitbook revolution 810 G2: unable to boot from USB Elitbook turn 810 G2 Hello Initially, I bought 810 rotate with 8.1 Pro window. I've recently upgraded to 64-bit Pro 10 Windows. The problem is that I can not boot from USB. Computer recognizes the USB drive but when I click F9 and enter in bootmode... He acknowledges as "drive hard usb ' but when I select it... it has no effect and does not start. Could someone help me solve the problem? I need to be able to boot from USB drive... Thank you Windows 10 64-bit with UEFI can only boot from a GPT partition. It may be that your boot USB drive is partitioned as MBR [Master Boot Record] and should be partitioned GPT [Table of Partition GUID] for UEFI. Create bootable USB key with UEFI support I have before me a 810 turn EliteBook with a blank disc (no recovery partition). I have not any restoration or recovery media. Where can I get something to perform a restore factory on this unit? Phone order t HP recovery media. The numbers in the world can be found here > >Contact HP I'm trying to deploy an operating system via SCCM 2012 a 810 turn and I'm having no luck with the driver for the CARD. I loaded the driver downloaded in SCCM and it is important without error but don't deploy. I put the driver on a usb key and it will load fine. Look in the file INF of the PCI VEN number is not there for the hardware in the Device Manager, is the right driver? Any suggestions on getting this driver to work with SCCM? This driver from Intel has solved the problem for me: Revolve 810 G1 keyboard characters when you type Hi all Just got a new HP turn 810 G1 tablet / laptop (12 GB memory 256 GB SDD). Otherwise, things are smooth, but it is extremely annoying problem of keyboard abandonment / jump / lose some of the characters when entering. It is not random, specific keys or combos. So far in this post, he jumped about 10 characters. It does not require typing fast, even in the start menu Win 8, when you search for an app and then hit enter to start the application, it could not react on the press of entry. It is just an example, letters are missing from any where as I type. I type pretty fast and know I'm hitting the right keys. Disable the touchpad does not help, it's not that I would accidentally touch it as you type. I've updated the BIOS, restored the OS to factory State (full restore HP), go to the English localization of OS, installed all the updates of Windows - no help. This makes work a pain, it is not possible to cat or document type when you need to go back and correct the errors that you have not done all the time. HP Support Assistant is not find more updates, number of product H5F12EA #AK8, WIn 8 Pro 64-bit. I installed a 8GB SODIMM under the back cover, included 4GB chip replacement. Will run a memtest overnight. Anyone the same light? tonttuz Hello Update of the situation- Nothing doesn't I could do thorough tests (including memory) HW run, tests the user added 8 GB SODIMM removed, SIM card removed, removed battery (switch required), full restoration of BONE made a couple of times (END / ENG locations), HP Support Assistant Windows Update patches applied, another keyboard + touchpad drivers of the repository product drivers downloaded and installed, the settings keyboard and touch twisted and applied a pious hope of heap. Called HP and at least one portable old of the week will now be replaced by a new. A few more lost days, I hope it'll work at least! tonttuz HP revolve 810 G1, Windows 8.1, screen auto-rotation of images does not work I'm sure I can't be alone in having improved my G1 810 turn Windows 8.1. However it is therefore more useful tablet as the rotation of the screen does not work. The auto spin button does nothing and after an HP engineer swapped botht huh card system and the button they said that the only option is to return to Windows 8 (original shipping OS). Really, this isn't a usable solution when you want the new features of Windows 8.1 update. My G1 of 900 ElitePad works well on Windows 8.1. Can it really be difficult to get the drivers right and tested? Someone at - it a Windows 8.1 working solution? Hello decommissioning of the Bios to F.44 and auto-rotation should work again (for me it worked). I found this working solution myself, HP could not help me anyway. Be aware, that the Bios F.44 didn't put heat-settings update as F.47, so you'll have a noisy fan HP couldn't tell me when there will be updates of Bios or drivers updated. to ensure that automatic rotation is also running Windows 8.1. Hope this information helps you... Kind regards Alex Revolve 810 G1 unlock in tablet mode. Windows Security button? There is a BIOS update for the revolution by moving to version F.43 update allows to touch the power button while pushing the Windows button (left of the central hinge) to act as the Windows Security button. -It worked for me. I also read that by pressing [Ctrl], [Alt] left button right button + [Del] button on-screen keyboard works but I have not tried. HP revolution 810 - ctrl-alt-del in Windows 7 Pro tablet mode Is there anyway to unlock option ctrl-alt-delete when in tablet mode? I tried in many shots, taps, using the windows key (holding down/etc.), the switch with the windows key and nothing will allow me to get to the login screen, with the exception of the actual keyboard switching and pressing ctrl-alt-delete. Your question would be better served in the forum of the business community business. You could look here and immediately find an answer to your question. Best regards Compatibility of HP pen turning 810 I am a teacher in Baltimore and recently received a 810 turn HP in a tech initiative. However, the County does not the pen supplied with the appliance. I want a pen with a pen point size... like the Wacom Bamboo Stylus feeltip. Do you know precisely if the stylus is compatible with the 810 revolution or is there a better option out there for less than $40? Thank you! Joe Your 810 turn has a capacitive multitouch screen that is compatible with several spare pens; you will find a good selection at most office supply & superstores (Staples, Target, Wal-Mart) and the site of HP Home Shopping. You will find many reliable and sustainable models for $20 or less - 'better' or the best choice is up to you to decide. If you are stuck on getting a Wacom stylus, their website lists compatibility stylus with many models of touch screen... Happy shopping! Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7 There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers: DeskJet 710 DeskJet 712 DeskJet 720 DeskJet 722 DeskJet 810 DeskJet 812 Deskjet 820 DeskJet 822 DeskJet 1000 The attachment contains a fix for this problem for Vista and Windows 7. [The patch does not work for Windows 8, 8.1, or 10 x 64 systems. There are efforts to this address, if a solution is developed it will be shown here. [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}] First of all make sure that the driver for the installed printer. If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.) Apply the patch as follows: log in to the computer with an administrator account. Download the patch by clicking on this link or on the trombone at the end of this post. Save the hotfix on your computer, then unzip it. Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3 Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows. You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place. This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste. Depending on your UAC settings, you may need to provide confirmation. Also allow existing files to be replaced if you are prompted. This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7. Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch. Update - here is that of the more detailed installation instructions: Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer. Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command: MD c:\temp CD \temp Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination). [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.] If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.] Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...) *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others). Net stop spooler (ensures that the files are not in use.) Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722) Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822) Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy) NET Start Spooler Output [Edit - note that these DLL files will already be in the directory. You will get a warning asking if it's OK to replace the files, say "Yes".]
At this point, the patch is installed and ready to print.
Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel]. If you use a make you converter USB / parallel it is supported in your operating system. The following messages are reported by cables USB-parallel that are supposed to work in Windows 7. A driver is required for the converter USB / parallel besides the driver of the printer. For converters supported, it is usually provided automatically in Windows 7. Note: the appropriate to select for USB-parallel converter port is often USB001:. I've heard of cases where the port was USB002: or LPT3: as well. If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab. Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4 If you use Windows 7 do the following: log in as a user with the administrater properties. [The following assumes that you are using IE as your browser] Click on the here link and select "Save". Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all. If extract all is not an option, then click on "Open with" and select Windows Explorer. Leave the default directory and check the box "Show extracted files when you are finished", excerpt. Click Start, computer, and type % windir%\system32\spool\drivers\x64\3. Arrange the windows so that you can access the two parts of the window. Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll. Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box. Note: %windir%\System32 is a system variable that points to the Windows directory. For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer. If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory. Hello I have a MacBook Air, which is about 1.5 years old, without any problem so far. He began with a stop at random in the login screen. When the computer reboots, it turned on for a few seconds then turns off. He didn't say 'Stop' or something l RN516 vertical Expansion for volumes more than 16 TB No autoexpand with volumes above limitation 16TB not exist yet? Y at - it an explanation of why this limitation exists? How to browse the internet? Has been seen Android tablet Bauhn and can't get online Hi, I know this will seem like a stupid question, but I, m a senior I am connected to internet through Optus. My daughter gave me his (Bauhn) Android tablet to use to get around. I am not able to access internet through this tablet... I activate Bl Spaces and tabs to scan from String Hi all. I'm sure this question has been answered before, but I couldn't find exactly what I was looking for. I have problems with the scan string function. My format string specifies the tabs (\t) as separators between several settings, but it also I was able to play games on IE8 so far.Games open upward, but when you press the Start button, it freezes, says that ie8 is not responding.IE8 works very well except for the games. (no other problems)I tried to games on MSN and Suddenlink home pages.
[[ourceIdentified'] LOG]! >
Unspecified error (error: 80004005;) (Source: Windows)] LOG]! >
For more information, contact your system administrator or helpdesk operator.] JOURNAL]! >Similar Questions
/ t5/HP-SoftPaq-Download-Manager/FAQ-28-Why-does-SDM-not-display-any-available-SoftPaqs-for-a/td-p/6367279#. Uvkl9fPnZjF
If you found my answer helpful please say thank you by clicking on the icon of the thumb.
If my answer has solved your problem, please mark it as accepted Solution. Thank you!
ERICOMaybe you are looking for
