HP 8300 Elite SFF hard disk transplant

I currently have a HP Elite SFF-8200 and two hard drives set up with all the software work properly. I would rather have to do it all over again if I can!

I have come to take delivery of a new 8300 Elite SFF and I would both the 8200 HARD drives, transplant (and will do a fresh install on the 8200 at the disk in the 8300).

Both are running Windows 7 Professional x 64.

Is this likely to be a problem?

Nigel.

You are the very welcome, Nigel.

If you want to go through with the attempt, here's what you need to do:

On the 8200 Elite...

Download these files (first download what you want). Extract them to a folder where you will browse for them later.

http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3449 & DwnldID = 22194 & Keyword = Intel + Rapid + Storage + Technology +(Intel+RST) & lang = fra

Go to Device Manager, then click on IDE ATA/ATAPI controllers section.

Click the Intel Desktop/Workstation SATA AHCI controller. Click on the driver tab, click on set to update driver.

Select her browse my computer for driver software.

Click the let take Me a list of drivers for devices on my computer.

Click the disk button.

Find where you saved the driver files that you just downloaded and select the Intel (r) 7 series/C216 Chipset Family SATA AHCI Controller in the list.

Follow the rest of the guests and should install the driver. Now, do not restart. Shut down the PC and install the drive in the 8300 and hope that it starts.

If this isn't the case, then you need to reinstall W7.

Paul

Tags: HP Desktops

Similar Questions

  • 8300 elite SFF: 8300 Elite won't USB flash drive boot

    Elite Mini PC 8300.  I made a bootable USB key but cannot get the Menu of boot or boot order configuration in the BIOS to see the player.  Exactly the same as in this other thread pending: USB not available in the Start Menu

    In 'Device Configuration' (BIOS) is listed, it does NOT appear in the Boot configuration order, even if I save changes and reboot.  I have disabled UEFI and Secure Boot, activated Legacy BIOS, I intend to install Windows 7 x 64.  When starting I press F9 or ESC to display the start menu and the USB key is not listed.  All USB ports are enabled.  Tried the ports front and rear (except USB 3.0 those W7 with no support from the other drivers for USB 3.0).  I tried he prepares with Microsoft USB DVD Tool and Rufus.

    The flash player has worked well with several other PCs.  for example I have HP Pro 4300 SFF and the flash player starts without a problem here it is configurable in BIOS and select from the Start Menu.

    First attempts on Elite 8300 was with BIOS v2.99.  But I also tried after update BIOS to v3.03 because release notes made remarks on improving support USB, but there was No change even problem.

    Take the battery CMOS press switch reset CMOS on the systemboard put the CMOS battery, restart the device to fix a date and time in the BIOS and check if this is useful.

  • Pavilion elite e9280t: hard disk failure

    My HARD drive has failed. Can I replace my ST3750528AS (700 GB, 7200 RPM SATA) with the last disk of 1 TB of Seagate (ST1000DM003)? They also offer a player of games, ST1000DX001, listed by Seagate as a SSHD, whatever that means. This player works as well? I am looking for a quick replacement. All the other things I need to know about the replacement of this drive? I have the recovery disks that I did when I bought the system.

    The ST1000DM003 should work fine as a replacement for the default ST3750528AS.  The SSHD is synonymous with hybrid system in the solid state (SSHD) of the Wiki.

    If the ST3750528AS still works, you can clone that to the new drive, which will do everything currently on your system to always be there.

    Investigate cloning if it seems attractive.

  • HP Compaq 8200 Elite SFF: Recovery disks

    Lost the disk partition and how do I get to the system recovery disc? Download at HP?

    Thank you

    You can not download them, they must be ordered.

    If you live in the USA/Canada, call this number...  1-800-334-5144.

    If you do not live in the USA/Canada, call the support number HP business PC for the country where you live.

    http://h50146.www5.HP.com/lib/doc/manual/desktop/b usiness_desktops/6005us_332630_007.pdf

  • ELITE 8100 i5 - 3 to HARD DISK

    I have an i5 Elite 8100, Windows 7 Professional 64-bit, 4 GB RAM 160 GB HDD hand.

    I tried adding a WD 3 TB as 2nd drive, but BIOS show the reader Go 810 and in window 7 disk management it shows as unallocated new Volume 2048 GB NTFS & 746.52.

    I have the latest version of the BIOS (1.05) and the latest drivers from Intel. Technology program Intel Rapid Storage Technology I have installed show only 2.795 GB.

    Any help or advice would be greatly appreciated, I can't believe that an i5 PC cannot see a 3 TB drive.

    Concerning

    John has

    Hello:

    So that Windows to 'see and use' all 3 TB of secondary hard disk, you must format the disk to the GPT.

    Read this white paper from HP for more information.

    http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3784892&docid=emr_na-c02826744&docLocale=en_US

  • Upgrade HP Pavilion Elite m9040n PC (GN553AA) second hard disk (e :))

    The only upgrade to the office, is that it is now running Windows 8 32-bit Pro. The second disc (E is the original disk of 320 GB.) What is the most big hard disk (in GB or TB) can I put in to replace the secondary hard drive (E?)  The BIOS is running with the delivered version.

    Hey HPbinary,

    Most SATA drives should work in the system, so, basically, any capacity will be fine.

  • HP 23-g116 5CM44802Q5: smart hard disk error

    I just started to have an error...  Error Smart hard drive on my desktop and it has only 1 year.  What could be the problem.  y at - it an easy fix?  May not have a hard drive problem, it is not used every day.

    Hi katcopass,

    That looks like you have a hard disk failure. To make sure that we should launch a hard drive diagnostic.

    To access the menu diagnostic you want to start typing the ESC key as soon as you turn the unit on and it should bring you to the start menu. Press F2 it and it will bring you to the diagnosis.

    If the diagnostic fails, it should give you a failure ID 24 characters; in this case, you want to exactly copy down and call customer service. According to the model, there are three main numbers:

    • For the home and specific products, dial + 1 800 474 6836 (e.g. ENVY, Pavilion, lines of spectrum)
    • For the company's products, please call + 1 800 334 5144 (e.g. Prodesk, Probook, Pro tablet lines)
    • For Elite Business Products, call + 1 866 625 1175 (Elitedesk, Elitebook lines Elitepad)

    You will need to provide the following information to the representative answering:

    • Serial number
    • Product number
    • ID failure of 24 characters

    Thank you!

  • Division by zero weird problem on HP 8200 Elite SFF

    Greetings,

    I posted my message here, it appears now that my problem is hardware specific.  My machine has the following specifications:

    HP Compaq 8200 Elite SFF
    Intel Core i5-2500 Duo @3.3 GHz processor
    8 GB memory

    Windows 7 x 64

    (I can provide more details if necessary)

    This has been me puzzled for more than a week now!

    We have an application where we lack in a division by zero. That request is deliberately built to raise exceptions in this case, with a call to the function _controlfp_s for edit masks on floating point exceptions.

    Now, when you run in a division by zero pretty much all of our machines, Visual Studio 2005 debugger breaks in the right place in our source files. However, on this machine, the location of the break is in every sense and seems to be unrelated to the real cause of the failure. So as a test, I built a simple win32 C program with just the following lines of code:

    int main (int argc, char * argv [])
    {
    float temp1, temp2, temp3;
    unsigned int control;

    _controlfp_s (& control, _EM_UNDERFLOW + _EM_INEXACT, _MCW_EM);

    Temp1 = 1.0;
    Temp2 = 0.0;
    Temp3 = temp1/temp2;

    return 0;
    }

    On all these 'good' machines, the code breaks when the temp3.  Among the other machines tested successfully, I had various hardware and operating systems, including Server 2008 R2, Windows XP x 32 and Windows 7 Pro x 64.  However, on this machine, the code stops at:

    C:\Program Files (x 86) \Microsoft Visual Studio 8\VC\crt\src\tidtable.c

    function:

    __set_flsgetvalue()

    In reviewing the records I have change the assembler code, everything seems fine until I hit the "ptsps" statement... then all records seem to be messed up (vs research as expected on a good machine). When comparing the stack on the good vs. bad, I also see entries of pile on the wrong machine, I don't see a good...

    Now... Here's what I did to solve problems:
    1. a disc image of the original disc HP on a hot spare and the original picture restored.
    2. only installed Visual Studio 2005 Pro - portion of C++.
    3 - tested above, code has always failed.

    4 - update all service packs Windows and tested above code.  Failed.

    5 - update all service packs, the Studio 2005 and tested above code. Failed.

    6 uninstalling all the bloatware and tested above code. Failed.

    7 - updating the BIOS and firmware and tested above code. Failed.

    8. install Visual Studio 2010 and tested above code. Failed.

    Then... I decided to take my spare disk image and install it on a similar, but a little older HP computer that we have, which has the following specifications:

    HP Compaq 8000 Elite SFF
    Intel Core Duo E8400 #3 GHz
    4 GB memory

    I went through the process of installation very well, even though she used the typewriter 8200 recovery partition.  On this machine, I simply installed the operating system and Visual Studio 2005 Pro - portion of C++.  No service packs not whatsoever (even if the Studio 2005 requires an update for 'vista') and the code worked as expected!

    So, that leaves me about almost everything but the material!  Also note that I tried to disable several processors and all optimization of the BIOS on the 8200, without success.

    I don't see anything else I can try... Please help!

    Wow!

    After the posting of this message to a friend... He found a document showing very similar symptoms on some of their CPUs from intel... I then found the exact document who applied to our specific processor (intel i5-2500) here:

    http://www.Intel.com/content/dam/www/public/us/en/documents/specification-updates/2nd-Gen-core-desktop-specification-update.PDF

    See Erratum BJ1

    This article describes pretty much exactly what I run into!  (Seriously), I never thought this would be a problem at THIS level!

  • Replacement for HP Pavilion Elite e9250t HARD drive

    I get an error message saying "A disk in a RAID 0 volume is a failure".

    I plan to replace both drives, currently, to 500 discs with a capacity higher than as 2 TB each. The Pavilion Elite e9250t supports 2 TB disks? And can I install them with RAID, so that my data is protected?

    Hello JMHP,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that you have questions about your desktop PC HP Pavilion Elite e9250t supports 2 TB disks and whether or not it supports RAID. According to HP Pavilion Elite e9250t desktop PC product specifications and configurable Options , your computer supports "2 TB (2 x 1 TB) 7200 RPM SATA 3 G (3.0 Gb/s) ' so the answer to your first question is 'YES', it will support a 2 TB hard. As to your second question as to if she supports RAID, indio motherboard (which is what you have) supports the following:

    • Integrated RAID controller: P55 (same as previously introduced application ICH9r RAID)
    • Steps to configure RAID (internal link to setup for P55, even the steps of configuration for ICH10r and ICH9r)
    • Intel RAID solution is called Intel Matrix Storage Technology (outside link)
    • Only some models indio compatible ship RAID (see datasheet for your model). Compatible RAID means that the system is ready to be configured for RAID 0 or RAID 1.
    • Migration from 1 to 0 is supported by material in the world.
    • RAID modes supported *:
      • RAID 0
      • RAID 1
    • Additional resources:

    * NOTE: three hard disks requires a RAID 5 and RAID 10 four hard drives. While the hardware can support other RAID modes, only RAID 0 and RAID 1 modes are supported on models that include this motherboard.

    I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

  • 2000 - 2B10NR: hard disk at startup error...

    They gave me this computer from a friend to keep and fix (out of warranty) and I turned on, I get the message

    Hard drive error
    Run the hard drive Test in the diagnostic system.
    Hard disk # (XXX)

    I searched your forums and thought it is better to buy recovery disks. Yes, I did.

    They came and I installed everything and became happy and then at the end (2 hours), the Recovery Manager said he failed and gave a system error log. I recorded it on my usb key. Then tried again. No luck...

    I did a test lying on the hard drive and the first time he says failure of long DST: 6BS883 - 6 B 7806-MFGK1F-61? ED03

    So I need to know if it's a simple hard drive failure.

    Everything came out OK in tests.

    I found that a replacement HARD drive on ebay for $ 30 and it's an easy replacement procedure.

    I just need a confirmation of this is the failure of HARD drive before you buy

    What HARD drive I see for my model:

    320GB SATA drive hard - 5 400 rpm, 2.5-inch small form factor (SFF)

    Is this correct? There is no model custum. Bought at the store with equipment and factory settings.

    Thank you

    Yes, DST Fail means that the hard drive is bad. The 320GB hard drive matches what you have now.

  • XPS 8300: Install new hard drive 3 TB BSOD results after imaging but not after Win7 clean

    I have a XPS 8300 and the original Seagate 2 TB hard drive is dead. Because being forced to install a new HARD drive, I opted for 3 TB and bought a WD because I had horrible luck with Seagate repeatedly.

    Anyway, I installed the new HARD drive and booted from the Windows 7 64 bit Pro installation disc and attached my external drive to backup and choose the backup image to the new disk. It completed without error, but when the computer restarts, I get a blue screen of death with the 7B stop code. I tried to put the HARD drive in a box and attached to another computer, and all my image files are there so I know that the computer was able to write the image to the new HARD disk. How to fix the BSOD errors? I set to update to the latest version of the BIOS (A06) but always the blue screen. I tried to install the latest Intel drivers also and which does not seem to do anything.

    Frustrated, I installed Windows 7 clean on this drive and I am writing this message from him. The drive appears in my computer as a 2 TB. Disk Management displays 100 MB System Reserved Partition, Partition C: of 2047 GB and 746 GB unallocated.

    Why a new installation does not seem to work (I know that I would have to format the 746 GB to use it and to give it a new drive letter) but the imagery that the disc breaks down. What Miss me?

    I've seen a lot of posts on using Intel drivers to solve similar problems. These drivers get breaths during the imaging process? Should they be installed before the imagery of the backup? (Thought that I did, but maybe I didn't do it right - their installation can be verified before the disk imaging?) Tried to call Dell and Windows support... am no where in a hurry.

    Hi LG1382,

    You cannot start Windows 7 on a 3 TB drive. You can use it for data, but not as the system drive. Windows 7 can only start TPG on systems with BIOS UEFI, which does not the 8300.

  • Drive light external HARD disk Warrior exploded

    I use DiskWarrior do a reconstruction of the hard drive to save the files, if possible. Hard drive does not appear on the desktop, which had been seen as a USB device on system information. During the reconstruction, the Seagate external HARD disk light exploded and is no longer visible to the Profiler system as a USB device. Should I cancel the reconstruction? Should I try disk referee to 'stabilize' the disc and run Disk Warrior?

    Can you describe the real problem which caused you to run DiskWarrior "to save the files?  Who can provide a clue about your current situation.

    If DiskWarrior' forever,' you have to cancel rebuild it later.  How long it has beed running?  It may take time, if repairs are done by DiskWarrior.

    DiskWarrior works repairing data directory player (which defines where the files are stored).  There are other types of utilities who hunt the disc for actual data.  For example

    https://www.prosofteng.com/data-rescue-recovery-software/

  • external hard disk transfer photo library

    Hello

    I tried to transfer my library on a hard disk formatted with plenty of space and get this error message

    The Finder cannot complete the operation because some data in "Photo library" cannot be read or written.

    (Error code - 36)

    I need to transfer photos to free up space on my computer

    Can anyone help?

    Vanessa

    What is the format DHM? For the photo library, it cannot not Mac OS extended (journaled) - no other format will work

    LN

  • Syn function between two hard disks

    Is there any function of Syn in the Mac OS already has syn function between two hard disks?

    Just checking, do you mean sync?

  • Export Firefox bookmarks directly from hard disk.

    Hello

    I would like to export my Firefox bookmarks directly from hard disk. Can someone advise please if this is possible and provide the instuctions?

    (Note: the export option does not work because of Windows keep crashing - cannot open Firefox at all).

    Thank you very much!

    -)

    Copy bookmarks

    To open the bookmark, Manager press the ALT or F10 to rise
    the tool, then select bookmarks. Access key is < Control >(Mac: < command >) < shift > B.

    Once the window is open, the top of the page, press the button
    Import and backup. Select export bookmarks to HTML and follow
    prompts and save it in a HTML file. Copy the file to another computer.
    Repeat the above instructions, BUT select Import Bookmarks in HTML,

Maybe you are looking for

  • How to bind the result of research on the cells of another graph

    IN numbers, is it possible to have the result of any formula of no matter where you want to stay to appear. So if you change your figure the new result

  • Satellite P200 - question RAM upgrade

    Hi all I'm looking for some RAM for a Satellite P200, although I can't find it on any list of compatibility. I'm hoping to get two 2 GB of RAM DDR2 880.Can you help me please. The RAM will be downrated to a slower speed in the Toshiba or the 880 work

  • convert fat32 to ntfs files

    peace be upon you Thank your answer ror I hope that your work of solution with me Thank you very much

  • Impossible to uninstall games

    How do we uninstall two games I'm finished playing that take up a lot of space on my hard drive? I tried the obvious method of uninstalling programs and features and I tried also to insert the discs of each of the games and remove them this way, but

  • HP CUE DeviceDiscovery Service hung on startup service

    I have a printer all-in-one HP 2750 and lately because an update has been added via the HP update my OS system hangs as follows: DescriptionService HP CUE DeviceDiscovery Service hung on starting. Signature of the problemProblem event name: ServiceHa