HP 8460p left two USB ports do not work.

Hello

After a motherboard replacing the left two ports of the laptop don't work. AMT is enabled, DMI is correct, BIOS is the latest UEFI value by default, enabled USB ports in the BIOS. What I was asking, the funktion of the ports support work, but I can't begin with my USB stick or windows diagnosis 7 recognizes this device. (tested with different USBdev.)

What could I have forgotten?

THX for the help.

It seems that if that was the problem. In the next few days, I can verify this.

Thanks a lot for all indications.

JP

Tags: Notebooks

Similar Questions

  • X 51 - R2. Before USB ports do not work

    I just got my new Alienware X 51 R2 recently. I begin to test on my new computer. Then I found at the front, two USB ports do not work! My USB device is functional because it works when I connect it to the rear USB ports. I don't know what problem is it? I tried to update and install the driver too much on Dell.com. It's a new pc and therefore disadvantage if the front USB ports do not work. Help, please

    Just for someone else who has this problem. It's actually all because the cable that connects the USB card to the front of the motherbard is connected with a black cable. You will probably find that opening upwards, you will find that the thick black cable is not connected.

    Once reconnected, you will have your USB market back again. You will also find that your AlienFX works. I just had this problem and after the challenging my brain trying different drivers, reinstalling the operating system, make drains of power without meaning, try all USB, I, I thought I would check the actual cable and voila. Hope it helps others in the future.

  • NB200-12N - USB port does not work

    Hello

    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you

    Paulo

    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • My USB ports do not work.

    Hello
    Yesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my jump drive and bring it to our local printing store. However, when I put my jumpdrive into the USB port to transfer the project, my computer would not my USB - stick. So now, I think that for some reason that my USB ports are not working. Why is this happening and how to fix it?

    Hello

    1 reboot to be sure nothing blocks the ports.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices

    Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
    plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
    for all instances

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • My USB ports do not work after that I updated. I discovered that they were not working because my mouse no longer works

    My USB ports are not working after I upgraded to don't know what could have caused this and there is no fix auto feature that opens, I discovered that they were not working because my mouse no longer works HELP Please

    Original title: hardware device

    Hello Neale,

    Two things for you to try: http://support.microsoft.com/mats/Windows_USB_diagnostics and if that does not work, try this one: http://support.microsoft.com/mats/hardware_device_problems/ .

    Let me know if one of them might be your problem.

    Kind regards

    BearPup

  • I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

  • Re: USB Ports do not work on my Satellite L830-145

    Hello
    I have Toshiba Satellite L830-145 with Windows 8 and all USB ports do not work. Have updated the Intel BIOS drivers and uninstalled and so on tried a lot and still no luck
    Maybe here someone will have an idea

    When I start the computer power light before windows starts and goes dead when windows starts loading
    On USB3 I can recharge the phone, but it won t recognize anything in windows
    Any help much appreciated.

    According to specification for laptop, your laptop comes with Win8 64bits.
    Using the original version of Windows preinstalled?

    All that you have done is just, but if nothing is done, maybe you should try to reinstall original recovery feature by image and test with the factory settings.

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you
    Sani

    Hello

    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

  • USB ports do not work after waking up Satellite A200 from sleep mode

    After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!

    Hi mate,

    already tried this:

    Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.

    Maybe it works. Another solution would probably be this Microsoft KB document:

    http://support.Microsoft.com/?scid=kb%3ben-us%3B812946&x=8&y=9

    Greetings

  • Satellite P200 - 17 c: USB ports do not work after BIOS update

    Hello

    Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.

    Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)

    I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.

    Any info or advice would be great.

    See you soon.

    Glad you ve found a solution and thank you for sharing this with us

  • Satellite L40 - 18W - USB ports does not work after format HARD drive

    I formatted my laptop "L40 - 18w" after that all usb ports do not work.

    Could you please help me on this issue

    Thank you

    Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
    Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
    There you can find all the drivers for your model of laptop including driver chipset.

  • Satellite A110-260 - USB ports do not work

    Hey!
    I have a Satilite A110-260 of my brother.
    The problem is that the USB Ports do not work :-(

    They go into the hardware Manager, but I can't install it.
    I have download the hardware installation of the Toshiba homepage but... :-(

    Can you help me?

    Sincerely of John

    PS Sorry for my English ^^

    Can you please tell us what OS are you trying to install?
    SP1 or SP2?

    Please after the installation of the OS, the first thing you need is install driver Chipset.
    Did you install the right one?

  • Satellite A10 s203: USB ports does not work

    Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...

    Hello

    If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

    Good bye

  • El Capitan USB port does not worked well under Yosemite.

    Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
    Has worked perfectly under Yosemite unfortunately too long to go back.

    The USB port does not work with other USB devices?

    I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

    http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

  • xw6400 workstation: USB ports do not work

    Non of my USB ports work. I tired everthing but always without success. In the end, I removed microsoft 8 and installed a new, but still my USB ports do not work. Motherboard is HP E93839

    Anyone know how to repair or fix this problem please?

    Concerning

    Thank you, Mohammed, but I already did everything on the Microsoft Web site. The problem is the motherboard no software issue. I plugged in the motherboard main power power off and waited 5 min the reconnected and it started working.

Maybe you are looking for

  • WiFi slow Alternative?

    I have a question about the speed of OS X on a MacBook Pro 15" I am running 10.10.5 Cross checking the material with the used Apple seller I find the map Wi - Fi is only capable of 1.5 megabits per second (Yes mega bits, not bytes) You are looking fo

  • How can I find drivers Windows XP for Satellite Pro 4600

    Hello to all peoples,Ask for that, but you give driver just the download link.But I don't know which is my series A or L or P. My laptop is Satellite pro 4600 PIII700/128/C/LM/W PS460 E. Now, everyone gives answer what's my series name quickly.

  • Cartridge for printer

    I have two new color cartridges C6625aa n ° 17. My printer does not print more colors. I want to buy a new printer HP printer that uses that these color cartridges. What new models in Australia will use these. Thank you PJ

  • Laptop to TV wireless - for Photo viewing

    wasn't sure what sub-forum to post, to chose this one large participation,-home computers are wireless network, to display pictures on our TV - but the TV manual does not whether it is connectable internet and this seems to be a requirement of the Un

  • How can you change a password on Vista for a group of net work at home

    How can you access the area to change the password for a group of net work at home? I'm unable to find had worked well but formatted Vista computer to make it faster. Now unable to find the box to change the password. Another computer on a network ru