HP 850 G2: AccelerometerSt.exe - Application error

Similar Questions

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Computer OFFICE-R4RAE96: AccelerometerSt.exe - Application error

  These days, when I open my laptop, it's show as "the application could not start correctly (0xc000007b). Click ok to close the application. Also the top of the box of dialoge showing AccelerometerSt.exe - Application error

  Hello

  You upgrade your Windows 10 machine? A few other members, including me had the same problem a few weeks back and in my case, I simply reinstalled 3D Driveguard software.

  During installation, it actually says software on my machine is more recent BUT the problem disappeared. Download and run the following software:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71708.exe

  I hope this helps.

• Pavilion 15-ab522tx: AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  was shown when I rebooted my computer after installing some updates

  AFTE that I also had an error

  "System AccelerometerSt.exe error: mfc120u.dll is missing.

  Use system restore to restore Windows before the updates took place.

  Choose the point of system that corresponds to the schedule.

  See the thread next where a member has a similar problem. There is a link to the Hp 3D driveguard softpaq, which will provide the missing accelerometer DLL file you need.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/on-start-up-i-get-this-in-a-box-accelerometer-St-exe-System/m-p/4161428#M91513

• HP Pavilion 15-n226tu: AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The program can't start because mfc120u.dll is missing on your computer."

  Hello

  I did an upgrade to Windows Windows 10 8.1 that my computer was not shut down properly.  Now, whenever I start my laptop I get this error message.

  I have a HP Pavilion n226tu 15 Notebook PC model laptop and you ask to help me solve this problem.

  Best regards

  Gaurav Nath

  Hello:

  See if reinstall the software of HP 3D driveguard solves this problem.

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• HP Pavilion Notebook: AccelerometerST.exe Application error on my NEW computer laptop

  When I started this morning, I got this error-

  AccelerometerST.exe (0xc000007b) application error - could not start properly. Click OK to close the application.

  I see all the other posts about this error, but they were all of those who have updated from a previous version of Windows.  It is a new machine that came with 10 Windows installed.  I used it for a few months, and this is the first time I had this error.  I made two changes yesterday to the system.  I installed software from Intuit Quicken 2016 (the American version), and as a requirement of this program, I had to change the language of non-unicode in American English.

  Other than that, everything's the same.

  Help, please!

  Hello

  I'm surprised that you have received the 'replace' option as the version of HP 3D DriveGuard in my link is a somewhat older version and are generally provided with Windows 10 - cancel the installation file, restart the computer, and then try the version at the link below.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

  If you get the same error, after return with the full model number and your cell phone Nr-, you can usually get this by holding down the fn key and pressing ESC, or see here for a guide to the location of such information.

  Kind regards

  DP - K

• Pavilion M1Y45UA #ABA: Pavilion 17-g125ds AccelerometerSt.exe - Application Error

  Hello.  I recently acquired a new Notebook of 17-g125ds (Energy Star) HP Pavilion running with a Windows 10 (64-bit) operating system.  Once the system starts every time, I get an error message saying: Application error - AccelerometerSt.exe.  I got messages about this problem in the forum but none that I could find had to do with the Pavilion model I own.  Can you please help me to solve this problem.  Thank you.

  Hello

  Try the following.

  Download the installer for HP 3D DriveGuard on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  One time finished, open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows rebooted, open your download folder, click with the right button on the HP 3D DriveGuard installation program and select "run as administrator to start the installation.

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• Want M7 - K010DX Energy Star: AccelerometerSt.exe - Application error

  I have the same error message above.  He began the week last at startup only.  I have not added or deleted any software & don't know why it started.  I don't see a resolution for Windows 8.1.    Should I try the same steps as those with Windows 10 operating system?

  Thanks for your help. I appreciate it!

  Hello

  Yes, you should be able to use the same method detailed below.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• Game of the HP Pavilion notebook: AccelerometerSt.exe - Application error

  Well just to start my laptop computer and received the message quoted in the 'subject line' I understand it's on 'drivegaurd '... I searched on the net about this and have read uninstal 'drivegaurd' then reinstal but the problem is I can't find this app "for Windows 10 on the HP site... ideas... you wonder why it just happened, HP support assistant does not seem to want to find a problem... I've just updated my wireless adapter but can't see that cause this problem..." Thank you all...

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

• HP Envy 15-k081nr: AccelerometerSt.exe - system error

  When I start my computer, I get an error message saying:

  "AccelerometerSt.exe - system error."

  The program cannot start because mfc120u.dll is missing on your computer.

  Try reinstalling the program to fix this problem. »

  Where can I find this program? Any help on this issue would be greatly appreciated.

  Hello:

  Try the latest version of the driver and see if it works...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75979.exe