HP 8600: 2 Facer printing

Similar Questions

• my hp officejet pro 8600 won't print from my ipad.

  my hp officejet pro 8600 won't print from my ipad. ?

  Hello

  Yes.  Try following the instructions here http://support.hp.com/us-en/document/c02623193
  If this does not help, let me know and I'll see what I can do.

• HP OfficeJet Pro 8600: How to print on paper of custom format with Officejet Pro 8600 for Windows 10

  Problem: Cannot create a custom for HP Officejet Pro 8600 paper size

  Found a solution for Windows 7, but I need this same problem solved for Windows 10...

  The solution: 'Using pilot Deskjet 9800 to set a custom paper size to print for Officejet 8600' worked very well for me on a Windows 7 machine...

  However, the HP Deskjet 9800 driver is not available for Windows 10... you have another driver I can use that would work with Windows 10 and which is compatible with the HP Officejet Pro 8600... ???

  Hello

  Use the HP Deskjet 6940 as another driver, if it is not listed under HP it appears after clicking the Windows Update button in the Add Printer dialog box:

  1. Right-click your printer 8600 and select printer Ptoperties. A note which port is selected under Ports.
  2. Click Add a printer.
  3. Click on 'the printer that I want isn't listed.
  4. Select A Local port or a netowrk with manual settings.
  5. Select the port used by your printer.
  6. Select HP
  7. Select HP Deskjet 6940
     Note: Click on Windwos update if it is not listed under HP.
  8. Fill the wizrd and 6940 driver allows you to print a document custom formats.

  Kind regards

  Shlomi

• OfficeJet pro 8600: double-sided printing has stopped working

  I recently had to restore my RT Windows 8.1 running Surface.    Before that my printer was working fine.  After, I had a problem with documents stuck in print (QC) I finally corrected which but now my documents will not be 2 sided.  No matter how many times I select two sides printing in the print dialog box, it will not do it.

  When I go to the properties of the drivers it says duplex printing is not installed.  I don't know how to enable this option.  I've uninstalled and reinstalled the driver several times.  Well Finally, who sets the printer problem, it did not solve duplex printing.

  Any help would be appreciated.

  Hello

  In the Control Panel select devices and printers.

  Right click on the printer icon 8600 and select printer properties.

  Open the device settings tab and set as installed two-sided printing accessory.

  Confirm the changes and two-sided printing becomes available.

  For any questions, access the control panel can help the following video:

• 8600 does not print

  Hello

  I bought a new computer with Windows 8.1 Asus.  I downloaded the driver for the 8600 and the printer to the troubleshooter.  Both give the same result, they recognize the network but not the printer.  I know that it recognizes the network because it offers the network name and password in the two utilities.  In addition, I can print other printers on this network.  I tried to reset network as well as every manual control connections, he gave.  No dice.

  Hi tdh0728,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Officejet pro 8600, with Windows 8.1.

  I would recommend his guide. The printer keeps Wi-Fi connection.

  Hope this helps and have a nice day.

• OfficeJet Premium 8600 - 2 Facer copy format default for trays and legal documents.

  Maybe someone reading this can help me with two questions that I have about this printer.

  (1) how to adjust the printer automatically detects what tray (letter or legal) to print from?

  By example, if I print a legal document and legal paper in tray 2, can the printer auto-detection to draw paper from tray 2 without me having to select.

  (2) how can you do two sided (duplex) of legal size paper?  Can it be done? Whenever I have it try just prints pages unique faces.

  Hello

  You can set the assignment of Board as follows:

  1. Open Control Panel > devices and printers.
  2. Right click on the HP Officejet Pro 8600 icon and select printer properties.
  3. Open the device settings tab.
  4. Form of assignment tray, set the size of paper tray 1 and 2.

  Now by selecting the specific size will automatically mark the assigned plate.

  The Duplex accessory does not support legal size and can't do it, you can find this information in accordance with the specifications of paper output > supported paper sizes in product specifications:

  http://support.HP.com/us-en/document/c02858465

  Shlomi

• How to double face printed word when NO option for "2 Facer" when printing on HP 6510

  There is no box "sided print two" next to the option of "copies" when printing a word document. What impression of Safari '2 Facer impression' works.

  with 10.6 iMac and have already reinstalled the printer driver and updates

  I already posted on the set of printing problems with no solution so ad on specific MAC forum.

  Concerning

  Manor

  Hi Manor.

  From within Word, click on the file menu, and then click print.
  NOTE: The print window might be minimized. Click the blue triangle next to the product model to see all the available parameters.
  
  Click on the area of the lowest selection - Copies & Pages
  
  Select from the drop-down.
  
  Set the duplex option as the binding Edge Long (Portrait) or short edge binding (landscape).
  
  You can save the settings for later use by clicking preset > save current settings as preset.

  Kind regards

  Shlomi

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!

• OfficeJet Pro 8600 Wireless Configuration - print is in the queue, then disappears. Do not print

  I just got the Officejet Pro 8600 as a gift and burden of implementing software and it on my wireless network.  When I try to print an e-mail or a coupon, the command changes to the printer and indicates in the queue. Then after a few seconds, the print queue (work) disappears without printing the document.  This command goes to the HP ePrint feature or the Officejet Pro 8600 network?  It shows the HP ePrint as being on USB.

  I have run all the Diagnostics, downloaded all the new software, software packages and updates.  I spend several hours trying to get to the printer.

  Thanks for any help you can provide.

  Hi @bksechols

  Welcome to the Forums of HP's Support.  I understand that when you send a print job to your printer Officejet 8600 to printing to the queue, then disappears without the printing of the print job.

  To help you, you please provide additional information?

  • How is the printer connected (USB cable, ethernet or wireless)?
  • What operating system do you use?
  • All print jobs fail? If Yes and you are using a Windows operating system, please try printing HP and Scan Doctor for Windows.  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems.
  • When you send a print job are sending the address of electronic mail of the ePrint printer? If so please check The HP ePrint, print not print job if you send the print job using the print command, please see the document of your HP printer print jobs are stuck in the print queue .

  I look forward to hear from you.

• DeskJet Pro 8600: Ink black print only via Mac OS x 10.10 Officejet Pro 8600

  My Pro Deskjet 8600 is low on ink Cyan but I am trying to print a document Word in black and white using only the black ink cartridge, which is full. I found the setting on my Mac and you have selected "Black Ink Only", but the printer says that I still need to replace Cyan print. Why should I Cyan to print in black and white? Please tell me that I shouldn't keep all 4 full ink cartridges just to print in black and white? See the screenshots below.

  

  

  Hello

  The ink is required for the printer to use, you need to replace an empty ink cartridge to continue printing.

  You can read the article which explains this requirement:

  http://support.HP.com/us-en/document/c04331666

  Shlomi

• HP Officejet Pro 8600: Officejet Pro 8600 do not print

  I keep getting "the printer is not connected" in the print queue when I try to print wirelessly with my mac os x 10.9. The printer and the router are turned on and I recently installed the printer software, because I have not yet printed with this computer. I am able to print with my laptop windows 7 fine. Any advice?

  Welcome to the HP Forums @bg34,

  I read your post on printing problems you're facing in your Mac running 10.9 when printing your Officejet 8600 and I wanted to answer with my suggestions for help.

  See this link, try the steps in order and also try the "things to try" section and you should then print!

  "Printer offline" or "printer does not" Message (OS X)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "Accept as Solution" If we have reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• My Hp 8600 more custom print or scan more from glass

  I have a HP 8600 Office pro jet which works OK, but suddenly it I cannot print or scan by placing a document on the glass.  I can print from my computer, but not directly from the printer.  I get an error message telling me to ' reload original in the ADF and try again "or an other error message telling me the ADF is blocked.  As I'm not using the ADF, it is meaningless.

  I tried to turn off the printer, disconnect, leaving for 5 minutes and try again, but this is not enough.

  Very frustrated because I need to analyze urgently!

  Maybe there is something in the adf file that triggered the detector? Try to lift the scanner see if there is a piece of paper or something stuck in there to open.

• HP Officejet Pro 8600 N911a: E Print email address

  Hello

  Don't know if anyone can help. My 8600 has had a problem which was under warranty so I call HP just reset my printer that tell me to try it. Unknown to me my eprint information was wiped out too. Before I had time to put things up once again the problem came back and so I rang again HP who sent me to a different printer. I changed the printer and tried to set up eprint, which he gave me a new eprint email address. I tried to put my old email address in, but he said that he had been taken (Yes by me). I looked in help, but having said that you will need to print the code of the old printer to move it to a new.  After putting all the bits in the old printer it says that my original settings for eprint had been cleaned, I guess it was when I did the reset. Now how to get back my original email.

  Any help will be much appreciated.

  @Biggleswick

  I'm sorry, you've been around the block on this several times - and it is good that you now have a printer that works.

  The bad news: the algorithms (code) used by the email ePrint software do not re - use your new ePrint email address - even if it's your own e-mail address.

  You must assign a new ePrint email address whenever you need to reset your ePrint for some reason email address if it's your fault that the custom address has been lost / reset / manhandled.

  Perhaps this restriction will be modified in the future... It is hoped for that to be the case.  Grumble, grumble, book the mouse on the desktop...

  See:

  Add the printer device

  See the Section titled:

  • ePrint Setup
  • • Complaint form / Web Services Information Sheet / add a device: any time setting

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Officejet Pro 8600 more N91: Printer crashes with 0xB845D7DC when connect to UPC Ubee cable modem/router EVW3226

  Printing: HP Officejet Pro 8600 more e-All-in-One Printer - N911g

  SN: [personal information]

  REF: CM750A

  FW: CKP5CN1516AR

  Then try to connect to the router wireless (active DHCP), the printer LCD display starts to blink and a second, it displays B845D7DC.

  After that, the printer asks to reset and it restarts with wireless off.

  I have a cable modem with router wireless of my cable TV UPC provider called UPC Ubee EVW3226.

  I tried to connect the printer to the router using the WPS button and provide the password. In both cases, I have the same behavior.

  I have a dozen other wireless home devices that connect without problem to the router. But not the printer.

  Please let me know what other information will be good for you to solve the problem. Or, please provide a workaround solution.

  I found the solution:

  connect to your printer cable (you can use a direct eth between your computer and your printer cable), access the web interface and disable support IPv6 (let the IPv4 only verified): network > General > protocols > only IPv4 verified. Save and restart the printer.

  In 80% of cases, it will work on the wireless connection. For the other 20% when it does not work, try to assign a static IP address to your printer (network > Wireless > IPv4) in a second time. Take data from your router (IP, gateway, DNS).

• HP Officejet Pro 8600: Officejet Pro 8600 does not print after changing again router

  8600 worked fine on wireless for a few years. Have just changed provider of broadband services and installed a new router - I ran the Setup wireless on the 8600 and it tells me 'successful connection' but blue light wireless is disabled and when I try to print from any PC in the local network printer shows as offline. I deleted the settings of the printer to a PC and tried to reinstall, but the printer cannot be found. Next steps?

  Hello

  Thanks for the comments.  That is to say that it is not found, because the printer is not connected to the network.

  Here's what we recommend:

  1. replace the default wireless networks.

  This resource will help you:

  Restore the default network printers

  2. We recommend that you use the Auto Connect (AWC) for your printer Wireless HP software installation.

  Download and install the FULL features software, this wizard will help you:

  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  If you are not familiar with the AWC, this resource will help:

  Setting up the printer using HP Auto Connect Wireless wireless

  Hope that helps solve your problem!