HP 8600; Printer says it is ready for wireless printing, but will not print my documents. It prints all the pages of the test very well. What I am doing wrong?

Similar Questions

• A few days, I bought a mac mini which I transferred the data and programs with time machine: programs have been updated except for iMovie, and now it seems that I have to pay for the update: possible? What I am doing wrong?

  A few days ago, I bought a mac mini and I transferred all my data and programs with time machine: all programs have been updated but iMovie (7.1.4)... However, it seems that, to update to the latest version, I have to pay to download on Appstore: is it possible? what I am doing wrong?

  If it were a new mac mini, you need already installed 10.1 iMovie.  Otherwise, but you already have iMovie 9 registered version to your Apple ID, you can upgrade to version 10 for free, but if (as it appears) is an earlier version then you have to buy version 10.

  Geoff.

• HP LaserJet 200 colorMFP M276nw connects to my wireless network, but will not recognize the printer

  I am trying to set up my wireless printer, and the printer says its is connected to my wireless network, but I can't get my computer to print wireless if I disconnect my regular network and attach the direct wireless network name, which is different and stops my internet to work. How can I get my computer to recognize the printer on my regular wireless network?

  Hi @lelg,

  I understand that you want to configure the printer on the wireless network. I can help you with this.

  Uninstall the printer software.

  Uninstalling the printer software.

  Restore the default settings of the printer.

  Go to Configuration, restore the default values.

  Cycle power to the router and the computer.

  Run the installer on the printer wireless.

  Go to the configuration, Setup, menu wireless network, Wireless Setup Wizard.

  Print a configuration page to get the IP address of the printer.

  Print a Configuration report.

  Select the method.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server. Type the IP address in the address bar of your web browser. (Internet Explorer)

  If it loads the page from the network printer then the printer is on the network.

  Download, save, and then run the installation of the software. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Select your operating system, click Next and click on the software to download and install.

  Test the printer.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• MX340 wireless scan but will not print wireless

  I had this printer running on Win 8.1 for some time and had never been able to get wireless working.    I was delighted when I met recently with the fact that Canon had finally provided drivers for win 8.1 so I installed them.  I set up the wireless and has been able to analyze something wireless.    I try to print at this time, but later (overnight?) I tried to print and it tells me that the printer is disconnected.   It will scan without plugging in to my laptop but it seems to connect properly.   The scanner and the printer work with two different wireless connectors?

  It's very frustrating because I use the laptop in the House and I could really use the wireless function.   It prints without a problem with the usb connection.

  Windows 8.1

  I tried all versions of the printer I could find available (2), but that doesn't seem to make a difference.   I solved my problem by uninstalling all versions of my canon printer and all the drivers and programs that I could find related to these printers and starting from scratch.   Not sure what I did differently this time, but I am now able to scan and print wireless.   Yes!

  Thanks for any help.  (took me a while to get to this...)

• Windows XP is saying that he must be turned on, but will not accept my activation code.

  I have a PC that works with Windows XP for a few years.  It was off for awhile and when turned on, he insisted to be reactivated and will not go forward with windows loading until it has been registered.  Facilities to connect to the internet would not work as it seems to insist on the use of a dial-up access (it doesn't have a modem) and does not connect to my home network which has my broadband connection.  When I tried to activate by using the telephone service, he said that it is impossible to validate my copy as it can be hacked.  It certainly is not hacked, because it is an OEM version that worked for many years.  He refered me to microsoft.com/genuine, but this page doesn't give any help on what to do in this situation.  What should I do now?

  original title: my activation code for Windows is rejected.

  Interesting - you used an a Dell recovery disk to install XP on a Medion computer.

  No wonder, that he does not want to know!

  Try using the product key update tool to change the key for that on your COA sticker.

  http://Windows.Microsoft.com/en-GB/Windows/help/genuine/product-key

• launch cannot fix it for vista. downloads, but will not be installed. no error code given

  Question relates to error install windows 641 and similar. Problem is the windows installer service does not appear on the system, period. No avalible and fix fix it install, probably for this reason! Help!

  Thank you

  Dave

  Hello

  Method 1:

  You can check if the windows service install is present under services and check if the service is set to automatic. You can follow the procedure.

  (a) click Start.

  (b) type services.msc in start search.

  (c) search the Windows Installer Service and click on select Start.

  (d) on the general tab, next to Startup type, make sure that Automatic is selected.

  I also suggest you to see the steps and check.

  Unregister and register the Windows Setup program again

  1. click on Start, click run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.

  2. click on Start, click run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Try your application based on Windows Installer again.

  Method 2:

  I also you suggest to perform the clean boot, and then try to download.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

• HP Windows 7: my office window 7 says I have 40 new microsoft updates, but will not download.

  When I try to download microsoft updates stays where

  Hello

  40 is already too. Please try again and divide them in batches of 5 or 6 (see numbers MB and select evently).

  Kind regards.

• I can't launch the scanner after ive downloaded and or for the most part. What I am doing wrong?

  I don't know even what happened to my unit.  It was working fine, then I tried to send some documents in JustCloud to get space on the myhard drive.  All myicons then turned to the sheet of paper, and I can not cannot hardly straighten out such things. If I take it to someone to fix it, I'll never know what happened.  They do not give you their secrets, but of course they will charge you!

  You have an anti-malware protection, you can run analyses?  See thread of Vincenzo Di Russo on some good suggestions on ensuring that your system is clean of the infection: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4d71-960f-b561798b7b42

• Windows Update for xp downloads but will not finish installing.

  with 5 patches sent including a security XP update and silverlight KB2485663. He returned to download, but they won't install every time. Help, please.

  K

  Hello

  1. do you get an error message?

  Follow the steps below and check them off if they help.

  Step 1:

  I suggest that you try to install the updates in a clean boot State.

  Note: Do not forget to restart your computer in normal mode after a repair.

  Step 2:

  Follow all the steps (if any ever) article.

  You cannot install some programs or updates

  See also:

  http://support.Microsoft.com/kb/908480

• Creative cloud says "disconnected" but will not let me connect. Tried all solutions on the login page errors creative cloud 3.

  Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.

  Hello

  You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud

  Also try:- cloud creative connection errors

  Hope this helps!

• Printer passes all the tests fine but printing is empty

  Hallo

  Printer passes all the tests very well, but when its given a print-it looks like it prints but nothing goes on paper.

  Empty all paper coming out. Can you help me please?

  You can also run the Office diagnostics program.

• HP 1200 Series printer is recognized by Windows, but will not print on demand

  I have connected a printer to work series HP1200 via Windows 8 and is recognized as a recognized device. However, when I try to print a page it shows as waiting in the queue. I reconfigured the device and changed ports but get the same result. What I am doing wrong?

  Hi, TerrenceGraham,

  Try this:

  Start > type services.msc
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
    
  Go to the manufacturer's website and search for updated drivers

• I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work

  I just 6 s phone and when I try to buy stuff, it says "enter a password for santosjim@***". It's not my apple ID and my password does not work

  The phone that you have just bought is not new. It is locked to its previous owner.

• Media Player says ready but will not play

  When you try to view a demonstration of Access 2007, the video says ready but will not play. When I click on play it flashes media connection and does nothing.  I updated java installed windows and installed the codec do not know what else to do?

  Hello

  1. you try to view the video online?

  2. what browser do you use?

  3. What is the format of the video file?

  If you try to view the video online, so I suggest you to follow the steps in this link and check if it helps:
  http://support.Microsoft.com/kb/2532294

  Otherwise, provide us with more information about the issue, so that we can better help you.

  It will be useful.

• HP Photo Smart 110 will print and copy but will not scan for Mac.

  Recently switched to Mac computer HP. My HP Photo Smart 110 will print and copy but will not scan for Mac. I need to download a program for my Mac for scanning?

  Thank you!

  OK, take a look at this document; http://support.HP.com/us-en/document/c03379337

  Scroll to the frequently asked questions and click on one of the way to analyze the options. It really depends on how you installed your printer, but you should be able to use the print window & scanning.

  Let me know if works