HP 8600 Pro (networking): HP 8600 Scan after winning 10 updated

Similar Questions

• 3050 J610: 3050 J610 does not scan after Win 10 update

  After printing upgrade Windows 10 but the scan with error saying The HP DeskJet 3050 J610 is not found. Have you tried diagnostic and scan fix - it finds the scanner ok. Installing the new application that displays a general error.

  Any ideas how to fix it please.

  Hello

  Please try the steps below...

  1. Uninstall the printer from programs & features
  2. Restart the PC
  3. Please, download and run the Installer printer HP www.hp.com/go/tools

• After win 7 update at the start of my stops of the computer in Mode safe

  After win 7 update to start my computer continues to Safe Mode to choose (new) Win 7 or Vista operating system (old / deleted).  How can I fix it?

  Original title: win 7 start

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.

  http://NeoSmart.NET/DL.php?id=1

• Excite Pro - problem of WLan authentication after 4.3 update

  Hello

  I have a Pro excite, and today I did all the updates that where possible to the Toshiba service station.
  The last update Idid was the 4.2 to 4.3.

  After this update, it is not possible to connect to my Wifi.
  Authentication problem...

  I tried all of them, with or without WPS restarting the Tablet and the router...
  Before this update, it was no problem to connect with WiFi.

  What can I do?

  You can try to reset the Android system to factory settings and might try to reconfigure the wireless network.

  I found this recommendation in one of the discussions of the forum:

  + The reset process will erase all data, settings and apps on your tablet. You must have a backup of any data you want to keep before proceeding. +

  + 1. Make sure the Tablet is turned off and not in sleep mode. +
  + 2. Hold the volume and Power buttons simultaneously until the two Android icons appear. +
  + 3. Use the volume buttons to select the white box to the right. +
  + 4. Once selected, press the power button. +
  + 5. Use the volume keys to select wipe cache partition, and then press the power button. +
  + 6. Select Yes, and then press the power button. +
  + 7. Use the volume keys to select wipe data / factory reset and press the power button. +
  + 8. Select Yes, and then press the power button. +
  + 9. The tablet will reset now. +

• Satellite Pro L300 will not start after the Bios Update

  Help please.

  I simply formatted laptop Satellite Pro L300.
  I used all the drivers updated Toshiba and everything is fine.

  I then updated the bios with the latest version.
  After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.

  The ides welcome

  Hey Buddy,

  What start menu, you mean?

  I put t understand how it is possible until you wrote that your laptop does not start?

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Laserjet Pro CM1415 cold not scan after upgrade to 8.1 windows

  I upgraded Windows 8 to 8.1, and since that time, my laptop can't connect with my scanner.  I tried printing HP and doctor Scan, but when I downloaded the latest driver, he asked me if I wanted to remove my current driver is not to install a new driver.  How can I get my scanner to work?  It prints OK.

  Nevermind, I just tried the other installation option, which was to "connect another HP device.  Quick install another HP device using software already loaded on this computer. "What does install the new printer driver and my printer can scan now.  Now I go back and delete the old driver.

• LaserJet Pro M1217nfw booting is not after the firmware update

  Hello

  My configuration:

  HP LaserJet Pro M1217nfw (USB connection)

  MacBook Pro (mid-2012) running OS X Lion 10.7.5

  My Odyssey:

  The HP scanning software included on the CD is rudimentary to say the least. In particular, it don't will not let me scan multiple pages and combine them into a single PDF file.

  Tried to scan printing & scanning with ImageCapture, an excerpt, and the pane in system preferences: they see any of the MFP.

  Uninstalled HP, reset printing system software, downloaded and installed http://support.apple.com/kb/DL907 according to the instructions on http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Mac-Lion-Scanning-Multiple-Docs/m-p/159... no luck.

  Downloaded and installed the latest HP software http://ftp.hp.com/pub/softlib/software12/COL32660/Im-80903-6/LJM1130_M1210_MFP_Full_Solution.dmg

  Installation goes OK, then asked the installer to update the firmware of the printer and I foolishly said yes.

  Result: the printer will not be in service longer. At the start, it displays "then to initialize... "with the Green (ready) and amber (caution) of fires, then LCD turns off, then"initializing... ". "all over again, to infinity. Needless to say that the HP software or the Firmware utility see the device more and in system preferences, it is listed as "offline". In a Word, it is bricked.

  Of course, I could use some good advice. Thanks in advance.

  Solution in another thread:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/LaserJet-Pro-M1217nfw-non-functional-after-firmware-upgrade/m-p/2323767#M36922

• Adobe Acrobat Pro XI do not behave properly after winning 10 update

  Since the upgrade to Windows 10 XI of Acrobat Pro does not behave correctly.

  1. when I click on piece attached in an e-mail to open or make a right-click to print it always asks to open or save.  He has not done this before and I don't want to ask.

  2. when I print in PDF is no longer he wonder where to save it and I can't name the file as I want.  He saved just in my office, which is good, but I could always give the file a name and now I can't.

  3. when I try to close one of my PDF creations now I always get a box on the removal of hidden information and I have to click and option.  I just that it closes when I close.

  I looked everywhere in the program and updated (11.0.13) and repair the installation.  How can I get to behave like before without having to click, click so much?

  Thank you in advance!

  Hi Sheraldia,

  1. Please disable and enable Adobe Acrobat add-in for Outlook by clicking file > Options > Add-Ins

  2. to change the settings of the Adobe PDF printer so that he asked for the name and location,

  Go to the devices & Printers

  Right-click on the Adobe PDF printer select Printing Preferences

  Adobe PDF output folder in the drop-down list, select Prompt for Adobe PDF filename

  Click apply & OK

  3. for the last of them, please share any screenshot or PDF file.

  Thank you

  Abhishek

• Premiere Pro 2015 won't open after the recent update

  I tried to reinstall the application, then by restarting my computer.  No luck.  I get the error message "the application could not start correctly (0xc0000142). Click OK to close the application. "when I opened the program from the windows start bar.  When I try to launch the app for the creative cloud app (3.41.181), that nothing is happening.

  I'm on a desktop Windows OS 64-bit 10

  8 GB ram

  Graphics card ATI Radeon HD 5850 with lastest drivers (15.11.1) AMD

  AMD Phenom II x 4 955 Processor 3.20 GHz

  First Pro worked great yesterday, even though I was no longer able to select option GPU acceleration when I started a new project.

  Other applications like Lightroom Adobe and audition open very well.

  What should be my next course of action?

  Hi Travis has,

  AMD Phenom II x 4 955 Processor 3.20 GHz

  What should be my next course of action?

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Place dead 10 after Win 10 update KB3189866

  The update installed and restarted correctly. However, after power down the Tablet would not be lit. It's like the power switch is completely disconnected, and there is no other way to turn on the unit. It happened exactly the same way on the 2 tablets coming 10 Pro. This update looks like a "time bomb" for all the meeting place 10 tablets.

  It's very strange. I put on the charger for a short time today and held down the power button longer than usual and now two pills are working properly.

• Leaks memory satellite L655 - 14 d, high utilization of the processor after Win 10 updated

  Hello world

  recently, I updated my Toshiba L655 - 14 d running on win7 Home premium 64-bit to win 10.

  After that update system is memory leaks, high utilization of the processor and get stuck every 5 to 10 seconds, is a rhythmic problem happens while Starter upward.

  If music is played nothing breaks and distortion, while using word or another office associated SW it became marked delay in the characters that appear on the screen, using the internet or live streaming is also not smooth.

  Any suggestions to solve these problems?

  It is advisable to change the RAM and upgrade to the new HARD drive (current RAM is 3GB 1066 MHz and is disc HARD 500 GB, ATI Radeon graphics card), if the change has advised if I want on the RAM even or I can go for a more of the same for the HARD drive also.

  Thanks in advance.

  You may need to check if the problem could be related to some drivers installed (maybe GPU driver would need an update) or 3rd party software.
  Background running processes in the context of the system could block the CPU, and this could slow down the performance of the system...
  So a quick glance in the task manager can be useful.

  Of course, upgrade of RAM can be useful too... If you run Win 64 bit system, upgrade of RAM is recommended.
  The 32-bit OS can handle only 3.2 GB RAM... so in this case the RAM upgrade would be useless.

  With regard to upgrading the HARD drive:
  The SATA controller is able to manage any size of HARD drive, but to be honest, this will not increase the performance of the laptop... But change from HDD to SSD drive would increase the performance of the system... so I recommend you replace the HARD drive with SSD drive.

• after win 7 update all bookmarks and settings are gone. Help?

  Microsoft made on 12 'important' updates for my windows 7 computer at night. Now, all my Mozilla settings were lost, mu default duckduckgo search function disappeared, and all my favorites have disappeared. I am writing a book and needs to get back them. Need help please!

  I hope not relevant for you:

  If your desktop has changed, and you lost your documents folder and other data from Windows, see: https://support.mozilla.org/questions/968054#answer-467800

• Do not start satellite A300-1AK after Win Vista update

  Hello all, hope someone can help me

  I have a toshiba laptop with a view, I got the brilliant idea to make a update for a long time that no was not updated at the end I restarted the update as necessary nb. and then nothing!

  The practice turn on the toshiba nb outside screen and then the screen remains black, the hard drive does not read, I tried to put the recovery disk and start the disk but nothing to put the dvd, but no operating system, does not read anything...

  That's happened? Possible that an update is this damage? The problem and as I have already said that I can't act somehow...!

  -I can't access the computer Safe Mode
  -always black screen and does not load the hard disk
  -J' updated because I just reset the laptop with the recovery DVD, so the drive worked, once the update is complete, restart Windows that I came out of this black screen, I noticed that does not read the hard drive. ..

  Thanks for all the support and suggestions.
  Please send me more ' procedure to run

  Francesco

  Hmm, do you mean you don't see anything? Neither the Red Toshiba start screen?
  What to say it doesn't sound good.

  But try this short workaround:
  Disconnect the power adapter, remove the battery. Leave the laptop for a while disconnected from both parties I would wait a few hours
  Then bring the two parties together and try power upward

  Good luck

• Pavilion g7t-1100: Internal Microphone does not work do not on HP Pavilion g7t-1100 after winning 10 update

  Can someone (1) confirm that this model of laptop computer has an internal microphone and (2) say how to operate?

  Story:

  I've had this laptop for several years with Win 7 64 bit, recently upgraded to win 10 64-bit edition.  When you run Windows 7, I've certainly used an external microphone with the Jack, but I'm not sure I've ever used the internal mic.  Yesterday I tried to use Skype and couldn't get the microphone to work (I don't have an external mike where I am now).  Started trying to analyze and the only peripheral record listed in the recording of the sound control Panel tab is "Stereo Mix, IDT High Definition Audio CODEC" - don't know if this applies to the internal mic.  Speaking to, or by tapping on the hole of the microphone above the display caused no response at all in the level to the right of the window bars.

  Began to doubt that I have an internal mike, so looked up specifications.  On http://support.hp.com/us-en/document/c02910495, I found "Webcam with integrated digital Microphone (VGA)", which led me to go on webcam integrated under imaging devices.  Still no final confirmation that I have a mike internal, but I found a laptop computer with mike identified next to the webcam image, this corresponds to my laptop, so I really think that the material is there.

  I used Device Manager to check the updates for the device webcam (HP Webcam-101), and he says that the drivers are up to date.  I did the same thing for the IDT High Definition Audio CODEC, also updated.  I think that the drivers have been updated when I upgraded to win 10 in February.

  That's it - information or suggestions are welcome.

  Hi there @BruceBon,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the microphone on your HP Pavilion g7t-1100 CTO Notebook PC.

  The reason why you can't find loads or User Guides/Manuals books appropriate because the model you have is a laptop CTO, this means it is customized/configured to order. Where did you get to buy your laptop?

  When I went to the Service Guide and HP Pavilion G7 maintenance (generic), it shows an internal microphone located at the top of the LCD, but again, your laptop is a CTO model this is why there is no specification of final product because each of them can be customized.

  You can try to look over some of the screenshots in the microphone troubleshooting document. There are a few sections of this document that you can try.

  • Using the troubleshooting tool
  • Check the settings of the sound
  • Rise in the level of the microphone volume

  If you right click you see him show disabled devices and display devices disconnected in the recording of the Properties tab?

  They have check marks next to them?

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems, and where you bought your laptop from.

  Have a great day!

  Thank you!