HP all-in-one-22-3002nf: problems with the Realtek drivers

For the last three days my computer beeps at startup, beeps short and long beeps. It starts then, but I don't know that it should not be of these noises.

The wizard has recommended several updates, that everything I installed.

However, two Realtek drivers I have installed several times keep insisting that they should be downloaded and installed.

The drivers are:

64-bit Realtek PCIE Card reader driver (5229)

and

Realtek RTL8723 and RTL 81188EE 802.11 b/g/n Wireless Lan Drivers

Please can someone advise what may be the problem, why these two drivers keep asking to be installed during the installation has already been confirmed, and why the computer will beep.

Thanks for any help.

It is always good to unplug the PC, the power of the exe that can elapse after sometimes can cause components to fail or function of evil

Tags: HP Desktops

Similar Questions

  • Dell all-in-one 946 Communication problem with the printer!

    Hey guys I have a Dell 946 and his works very well and know all of a sudden it keeps saying 'Cannot communicate with the printer' whenever I try to print. I unplugged the USB cable and power cable and put them back in and also restarted my computer, but I had no luck. Someone help me please! I need to fix this problem I have a college full of paper!


  • I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

    I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

    Thanks for sharing this, yes turning Firewall works.

    Concerning

    Stéphane

  • ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

    My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

    Hi Laylac,

    Thank you for your answer!

    I am pleased that the solution is an easy solution for you!

    Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

    Best regards!

    "Please click the Thumbs up icon below to thank me for having responded."

  • Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

    Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

    Tried the Canon support? That would be my first port of call...

  • Brother all-in-one does not work with the computer more

    After an automatic windows/XP download started what follows:

    All-in-one Brother takes control of the computer, but are not sent or computer will not receive the image to the desktop.

    Also, same unit will receive a fax and normally sends to the computer to the paperport, but now he sends (i.e. "connecting to PC" displayed on the LCD of the brother) to a computer but it can not be found anywhere; so lost.

    Measures taken so far:

    1. Uninstall and reinstall the Brother software, no help.

    2 brother support after an hour said that it is the computer not brother (I believe that good).

    3 System Restore will not work, it goes through the whole process, but said at the end that there nothing; Try again...

    4. in addition, conducted a deep scan for viruses etc, nothing found.

    Any ideas?

    You have posted to a group of Vista, but seem to be using winxp?

    What automatic download? Update history will show what has been updated

  • Problem with the HP drivers Download Page

    Don't know where best to post this topic.

    I have problems with the HP driver download Page. Using the Chrome browser, I installed the HP product detection utility. Once installed, I admitted that it runs, and it correctly detected my HP computer and the details about this poster. A detail that he displayed was the guarantee being exceeded.

    Since I had hardware problems and had to replace the hard drive and reinstall Windows, I wanted to make sure that my computer has all the HP drivers and software required. This information would not be displayed. At first I thought it was because I had an active browser add-on. I've disabled and reloaded the page. This is where I'm having the problem.

    The product has been detected once more, but nothing happened when I clicked on the button search solutions for the detection of the product page.

    You have found the difficulty that has the utility.

    I never had a large measure of success with the utility unless I use Internet Explorer. I rarely use Internet Explorer.

  • Photosmart all-in-one wireless B109n - problem with detection of the cartridges

    I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

    When I tried to use it later, he said that the cartridges were not detected.
    Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

    Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

    How this can be solved?

    Back to the store where I got it.

    They saw the same thing I had met and gave me a new without much fuzz

    The new works very well

  • All-in-One Photosmart C5150 problem with printing of emails

    This problem just started.  When I print an email, there is a large gap between the message header and the message itself, so that a message of one page turns into 2 (or more) pages.  I have an iMac OS X.  When printing in other subjects - iPages documents, web pages, etc., this problem does not occur.

    scotlandgold-

    If you have Safari 5 there is a nifty little extension that you can download that takes care of your problem.  In your Safari Menu, under "On Safari" on the 2nd line is 'Safari Extensions Gallery'.  Click this button and then click on the link "productivity".  Scroll down and look for 'Print Plus' on the right side.  Click here to install the extension of your Safari.

    You will need to enter your Safari-->--> Extensions Preferences and activate the extensions on that check "Activate print more."  Once active, you will have a small icon of a printer in the top left, next to your buttons back and forth (to the left of the URL box).  When you want to print only part of a page, do not press on your normal print button.  Tap on this icon and you will then be able to select the part or parts of the pages you want to print, omitting everything else.

    Furthermore, this extension is downloadable for free, apparently on Apple.  Try this and I think you'll find that very well, he takes care of your problem.  I just installed it on my Safari!  Good luck.

    If it works for you, think about Mark this message accepted as a Solution to make it easier for others with the same question to find, thank you.

    -Randy

  • OfficeJet 5470 e-all-in-one: Subscriber instant - problem with #62 color cartridge - Cyan Ink only

    I just installed a new color cartridge and our copies look right.

    I aligned the printer and then cleaned them (the two cleanings) and Print quality Diagnostic report shows nothing in the column "Cyan".

    Is it possible that the cartridge is defective?

    Thank you very much for your help!

    Hi @fiveinthetree,

    I understand that you are having some print quality problems with your HP Officejet 5740. I'll be happy to help you.

    It is possible that the cartridge you received is defective, however, there are some troubleshooting, you need to try before you can replace as defective cartridge.

    I recommend contacting instant ink 1-855-785-2777 for support in real time with an agent. If they determine that the cartridge is defective, they can help you with the replacement.

    If this help will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps and have a nice day.

  • HP All in One printer will communicate with the computer.

    Original title: HP PHOTOSMART ALL IN ONE PRINTER C4480

    MY COMPUTOR KEEPS TELLING ME IT IS THERE HAS NO COMMUNICATION WITH MY PRINTER, I TRIED TO DOWNLOAD AND INSTALL FROM THE NETWORK DRIVER INSTRUCTIONS TO FIX THIS PROBLEM WITH NO NO SUCSESS I SHOULD THROW THIS PRINTER AND BUY ANOTHER

    Hello

    ·        What operating system is installed on your computer?

    ·        What is the exact error message that you receive?

    I suggest that you follow the steps in the link and check if that helps:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    You can also check: http://h30434.www3.hp.com/t5/Other-printing-questions/HP-Photosmart-C4480-All-in-One-gives-error-from-HP-Solution/td-p/105711

    Printing problems? Try the HP Print Diagnostic Utility

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&DLC=en&LC=en&product=3418705

  • HP 5610 all-in-one printer: printing problems from the internet

    my printer Hp 5610 all in one printer don't print properly on the internet, bold text is readable, any type is barely legible, and in some cases, unreadable. I have downloaded and run the hp print and scan doctor and followed touble shooting recommended changing usb ports and a different cable that has not solved the problem. The drivers have been updated and installed. The printer works well when you print files. I also changed ethernet cable which had no effect. I deleted and reinstalled the printer several times and still no results. I noticed this problem in the forums with different printers and systems, but I have seen no resolution for any of them. I'm open to suggestions to solve this problem.

    Hi @mikiev,

    Welcome to the HP Forums!

    I see that you experience printing problems when you print from the Internet, with your HP Officejet 5610 on Windows Vista. I'm happy to help you with this printing problem!

    A few questions for you, if you don't mind:

    • What is the name of the web browser that you use to print from?
    • What happens when you print from Notepad? You get the same quality print or better?

    In the meantime, I suggest go through this guide, Faded or dull in print colors. Also, I would suggest trying to print from another web browser. Such as: Firefoxor Google Chrome, etc.

    Thank you for posting!

  • HP Office Jet 5610 all in one does not appear with the fax

    I got a new computer with Windows 7 when I added my printer HP Office Jet 5610 all in one, it does not appear with the fax.  When I tried to install it with the disc from the printer, he Wouln't install.  What is the problem? I really need on the part of the printer fax.

    Hello

    Try this maybe this will help.

    -Type fax in the research - type on Windows and scan-new fax fax...

  • Problem with the graphics drivers in ThinkPad SL510

    Hello guys.

    I have a ThinkPad SL510 with Intel Pentium T4500 @ 2.3 GHz and 2 GB of RAM. It currently uses the Intel GMA 4500MHD graphics, which is very slow and even Counter Strike 1.6 has frame drops each time only and then. So I visited the page drivers for SL510 and there is a driver graphic AMD listed that will allow a card ATI Mobility in the laptop. But the problem is that I have download the package and it does nothing. It installs only certain ATI Catalyst etc. but none of the graphics drivers at all, my laptop always uses the base Windows XP ones.

    Any suggestions? I want to unlock the ATI card so its possible since its going to be better for the play of light.

    Thank you!

    It's the original of your SL510 config

    ThinkPad SL510 2847-BTG
    T4500(2.3GHz), 2 GB of RAM, HD 320 GB at 5400 RPM, LCD 15.6 in 1366 x 768, Intel HD graphics card, CD-RW/DVD-RW, Intel 802.11bgn wireless, Bluetooth, 1 Gb Ethernet, UltraNav, camera, 6 c Li-ion, Win7 Home Premium 32

    You have only Intel graphics, install drivers ATI will simply not work since you don't have any ATI hardware on your laptop.

  • Problem with the latest drivers ATI for T400

    I have a ThinkPad T400 2767-B75 with XP Sp3 with ATI Mobility Radeon HD 3400 Series.  (latest version of the BIOS)

    Just installed 8.771 - 100825 a-105152C in date 28/09/2010 and now get the following error every time putting into service or every time I try to enter the catalyst control center.

    ' Could not load file or assembly ' CLI. Implementation, Version = 2.0.3713.40381,
    Culture = neutral, PublicKeyToken = 90ba9c70f846762e' or one of its dependencies.
    The located assembly's manifest definition does not match the assembly reference.
    (Exception from HRESULT: 0 x 80131040) "

    ATI Catalyst does not load... I don't have my previous version of the driver (Version 8.712 - 100302 b-097094C) available and it is not on the site.

    I tried a roll-back of windows driver / reinstall etc with no luck

    No idea how to solve this problem or if there is a sine qua non for this driver?

    John

    OK, I removed all traces of the CCC (directories /... not removed by uninstall registry entries) and reinstalled. Follow-up to the recommendations of http://www.hardwareheaven.com/mobility-radeon-drivers-support/186707-problems-installing-catalyst-co... Works fine now... J

Maybe you are looking for

  • app Keynote does not appear on the iPad

    The keynote application icon does not appear on the IPad. Also impossible to download the application. However, I can open the app on the Apple store and then the application icon appears in the Suggestions of Siri. Why didn't - it is not the icon of

  • Cannot find drivers for Satellite Pro L100-101

    Dear Madam, Sir, I have a corrupted (rootkited) Toshiba L100-101. I need to reinstall the entire system on it. I don't have the original CD with the drivers and the OEM WIn. I tried the driver on your Web site without success. This model does not app

  • Pavilion g7-1167dx Notebook PC will not boot

    I have a HP Pavilion g7-1167dx Notebook PC running Windows 7 Home Premium.  When I turn it on, the LED only lights are LEDs of power (on the power switch and side) and the network LED on the F12 key.  I am not able to enter the diagnostics of materia

  • Help with DVD and CD ROM msg needs Attention

    Never seen this message before when running VAIO Care a click but under maintenance contract section DIAGNOSTICS EQUIPMENT VAIOI have 2 separate messages which read DVDROM requires Attention and money he needs attention CDROM both with the yellow tri

  • Iconia w4 820 screen project works on extend no duplicate

    If I get only audio, no video. looked at the answer elsewhere on the community and apparently the answer is to download and install update to-pilots. 2 questions: 1. in the event that I haveto it when my tab is less than 2 weeks? 2. I can only downlo