HP All In One: Lost power option after upgrading windows 10

Similar Questions

• All-in-one HP 1514: HP all-in - one 1514 print not because upgrading windows 10

  I have upgraded to windows 10 and since then have not been able to print from my computer. It is connected via USB.

  I can print test pages and conduct analyses, but when you try to print a document or email, it cannot communicate.

  I've done all the windows updates available for me, I've updated the drivers, I downloaded the e-all-in-one HP Deskjet 1510 serial printer drivers and full software functionality and followed the instructions. I have uninstalled and reinstalled the printer and restarted the computer after each retry.

  At first, he said that I needed to connect the USB key (even if it was connected). After uninstall and reinstall, it finally noticed that it was connected, but still will not print.

  Help, please...!

  HI @curl79,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Deskjet 1514, after the upgrade to Windows 10. And I'm happy to help you!

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using the printer HP install wizard for Windows. (Wait for the software to tell you to plug in the USB printer cable).

  Once you complete these steps, run the program printing HP and doctor Scan and let me know the results!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope that these aid measures and hope to hear from you soon!

• ALL IN ONE OFFICEJET PRO 8600: HP all in one printer cannot scan after upgrade to WIN7

  SINCE the introduction to LEVEL FOR wIN7... COPIES of the PRINTER, BUT I cannot NOT SWEEPING or POSSIBLY FAX (have not TRIED THE LAST ENCORE).

  PRINTER MONITOR SAID TO CHECK THE CANDLES, ETC., BUT ALSO MENTIONS NOT INSTALLED OCR SOFTWARE NOT?

  I DOWNLOADED WHAT I THOUGHT, IT WAS THE LAST LINK TO ONLINE (SOFTWARE AND DRIVERS). DOWNLOADED, COULD NOT INSTALL. CONTROL PANEL I CAN NOT EVEN UNINSTALL HP PRINTING PROGRAMS TO REINSTALL THE NEW LINK.

  CAN SOMEONE HELP ME?

  Thank you.

  HAVANESE

  Hello Maltesem,

  I'm so happy to hear that we were able to get the problem resolved for you.  It's great! 

  As for the small pop-up that appears when scanning, which is part of the new software and cannot be removed.  I know this can be a bit of a pain if you are not used, but it is convenient if the scan does not look right and you want to cancel it.

  If you have any questions or concerns, please by all means email me back and I'll be happy to help you at any time.

  See you soon,.

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• I have a hp 6310 officejet printer all-in-one trying to connect it to windows 7, 64 bit error - not supported

  I'm trying to get my printer officejet 6310 all-in-one and linksys router broadband for windows 7. I have a dsl modem. Error message says not compatible with windows 7. can we all say what I have to do to get this resolved. Thank you

  "danpowell1" wrote in message News: * e-mail address is removed from the privacy *...

  I'm trying to get my printer officejet 6310 all-in-one and linksys router broadband for windows 7. I have a dsl modem. Error message says not compatible with windows 7. can we all say what I have to do to get this resolved. Thank you

  On the printer, go here for the full Windows 7 driver package...
   
  http://h10025.www1.HP.com/ewfrf/wc/product?product=1119598&LC=en&cc=CA&DLC=en&lang=en&cc=CA
  
  --

  Mike Hall
  http://msmvps.com/blogs/mikehall/

  Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• HPlaserjet3390: My Laserjet 3390 offers more double-sided printing after upgrading windows 10

  My all-in-one worked perfectly but after windows upgrade 10 I can't solitaire to print double-sided and does not

  as one more option.

  How can I get print double sided once again.

  Make sure the driver knows that a duplex unit is present on the printer (assuming that one is):

  • For the instance of the printer in question, bring up the printer properties dialogue.
  • Select the device settings tab.
  • Make sure the duplex unit is set to installed and not installed.

  You will probably need to be logged in with administrator credentials in order to change the settings of the device.

  If the device does not have a double-sided hardware unit, then you can not do Automatic duplexing, but you should be able to do duplex printing Manual (print odd sides, reinsert the paper print same sides) if the demand for source document and printer driver supports this.

• HP PSC 1210v: HP PSC 1210v not recognized as a printer after upgrade Windows 10

  I have a HP 15 TS laptop that was purchased with Windows 8.  My printer is a HP PSC 1210v all-in-one and it worked fine with windows 8.  After upgrade my PC to windows 10, this printer will no longer be recognized by the PC as a printer.

  This printer is connected via a USB cable.  When I discovered the devices, it appears as "HP 1200 series" in connected devices.  When I discovered the "devices and printers" it appears in the category "unspecified" as "HP 1200 series", but not in the category 'printers '.

  Hi @dfeen8200,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and now your HP PSC 1210v is no longer recognized, and is not listed in the devices and printers.

  I would like you to take a look here: installation and using the built-in Windows print driver

  & Have a look here:

  Guide to upgrade Windows 10 for HP printers

  I hope all is well!

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• LR cc developmodule do not work after upgrade Windows 10

  after upgrade Windows 10 development screen freezes and I have to restart LR

  I love a piece all about the problem on the adobe Web site. I have a graphic processor of AMD radeon HD 7500 series and manually turn off the processor resolved the LR crashes.

  Thanks for the reactions

• do not start cc2015 after upgrading Windows 10

  Do not start CC2015 after upgrading Windows 10!

  What can I do?

  A time CC2015 open and that thr program stop and closed.

  Can I read a text at the present time it is not possible.

  What can I do?

  Best regards

  Sandte

  Hi Brucgovn, thanks for the answer! Just sorted and came here to update the post.

  My method is similar, I just do the following:

  1. Go to C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CoreSyncExtension (this was the only file on the left, all others had been removed from the CreativeCloudCleaner use of the Adobe Creative Cloud cleaning tool to solve installation problems running
  2. I came across the problem trying to remove, so used Unlocker (Download Unlocker 1.9.2 - FileHippo.com) to unlock. Then deleted. It's explorer.exe using the process, which I think caused questions... the process is using the file
  3. Reinstalled and everything seems to work.

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!