HP All in One Photosmart C7280 scan issue with Snow Leopard

Hello

I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

We love HP printer and it will be great to see it fixed.

My network configuration is very simple:

-192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

-192.168.0.106 is the MacMini (3.1) IP address mask subnet even

All connected using a router D-Link (5 ports).

Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

Any help really appreciated

Jean-Marie

Hello

Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

Anyway thanks a lot for your help!

Tags: HP Printers

Similar Questions

  • HP Photosmart C4680 scanning problems with Snow Leopard

    I have a HP Photosmart C4680 All in one printer/scanner

    Since upgrading my imac (early 2009 model) to Snow Leopard I have had problems printing and scanning

    My scanner has never worked since the upgrade

    printing has been uneven at best, but seems to be more reliable in the last week or two, since I downloaded the hp apple update the driver through the printing software update on my mac.

    I deleted and reinstalled the driver several times

    but nothing works

    whenever I try to scan something my printer, the hp scanning software begins to open on my imac, and their broken quickly

    If I try to open the program to scan my iMac, it crashes

    Help!

    I need to be able to use the scanner

    That is why in the first place, I bought the printer/scanner combo

    You must run the cleaner, if the question of fixing is not a standard uninstaller program.

    Uninstall in itself is not always solve the problem, so there is a 'scrubber' in the software that really cleans things out.*Note * run this will remove all software that has been installed, HP so you will need to reinstall all other HP printers that you have configured.

    Go to Applications/library/Hewlett Packard / click Uninstall HP

    Click on continue

    Highlight your device in the left pane

    Hold down the Ctrl and Opt, as well as Apple and click on uninstall

    There will be a pop up that asks if you are sure you want to uninstall all hp software.  (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)

    Click on continue

    Let the brosseuse it is.

    After that, add your C4680 with printing and fax and let the operating system to search for updates and others. If it asks you if you want to download them, accept you.

    Who should take care of it.

  • How or where to get them or buy the original CD for printer all-in-one Photosmart C7280

    My installation CD original for printer all-in-one Photosmart C7280 lost in the transition. Unfortunately now I have to reinstall the software, but the installation file downloaded refuses to install advanced features by asking to insert the original CD.

    Now where can you get such a CD.

    Thanks in advance.

    Shlomo [personal information]

    You can download or order a copy at this link.

  • Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

    After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

    Hi @HWEB

    What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

    While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

    Scrub / uninstall

    • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
    • Click continue, click on one of the printers in the list.
    • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    • Click Uninstall.

    Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

    Move the files or folders to the Recycle Bin, drag and drop

    • Macintosh HD/Applications / /Hewlett-Packard folder
    • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
    • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
    • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
    • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
    • MacintoshHD/Library/Frameworks/HPSmartX.framework
    • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
    • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
    • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

    Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

    • In Macintosh HD/library/printers/hp - delete the folder
    • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
    • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
    • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
    • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

    Close all open windows.
    Turn it back on.
    Empty the trash.

    Reset the printing system

    1. Click on the Apple icon ( ), then click on System Preferences.

  • HP photosmart premium e-all in one C310 series scanning issues

    Hello

    I have a hp photosmart e - all premium in one C310 series which I connected to my new computer windows 8.  The printer works but not the scanner and I can not get more information on how to operate? Can you please advise on how to get connected?  The installation of disc for drivers does not work.

    Thank you

    Hello

    Go here:
    http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=es&CC=co&TaskID=135&prodTypeId=18972&prodSeriesId=4023238
    Select your printer and the fetch your drivers Windows 8.
    Those who will restore your missing feature to scan.
    Kind regards
    Carlos
  • All-in-one Photosmart C7280: level of ink in the contextual menu "print".

    Where the ink level is in this pop-up

    I can see the level of ink on the screen of the printer and the solution Center.  I wondered why the level of ink in the 'impression' pop-up simply disappeared.  Thank you, anyway.

  • When printing, the all-in-one Photosmart C7280 squeaks

    How can I stop the squeaking repeatedly as prints?  I already cleaned the print rolls.

    It cannot be something you can do. The document below will guide you through a few things you can try. If this does not work, you will have to live with the problem or obtain a new printer.

    http://goo.GL/O1rVu

  • Alles all-in-one Photosmart C7288: Canoe more scan on my alles all-in-one Photosmart C7288

    When I swichted above 7 window tot 10 window, I lost my ability to scan from my printer. While a 7200 inctjet

    the stil printer prints documents but I can't scan my documents more.

    I used the updated software for my printer. In the installation, the system asked for a cd

    This one, I have more someone can send me a cd or someone has another solution.

    Thank you

    Hey @SNAJ,

    Welcome to the Forums of HP Support!

    I see that you encounter some problems with the scanning of the all-in-one Photosmart C7288 printer after upgrade to Windows 10. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, uninstall all software associated with the printer to your PC. Finally, download and install the latest drivers by clicking on this link.

    Please let me know the results after following the above. If you are able to scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • All-in-one Photosmart C6380

    My laptop is a VAIO with a new hard drive. My system is Windows 7, 64 - bit.

    No problem to install my HP Photosmart C7280 all-in-one. Everything works perfectly with this printer that is home #1.

    When I go to the #2 House, the printer is Photosmart C6380 all-in-One. Cannot install this driver. I tried downloading the driver and using the CD provided with the purchase of the printer.

    If I download the driver, when I open the file I get the message "Runtime error". If I use the CD, it goes further: I get the "Install" window, but a little later, I get a window titled ' D\Setup\hpzshl.ice_suffix... runyahoostub m "exe" "-wStub" "265236"... On the inside of the window, I can read the sentence "the specified file is missing".

    I tried to uninstall my McAfee protection and eliminate all nonMicrosoft services in the program, without success. What can I do? I need to have two pilots (C7280 and C6380) on my computer.

    Hi again Voussare,

    Sounds like that you had to go the long way to get the printer installed, but at least it is in place and running.  If you have any questions or concerns, feel free to write again and I'll be happy to help you.  In fact, I'll make a note of your process of getting the unit installed for my own reference, just in case I encountered a similar problem.

    Thanks again for your time.  It is has been a pleasure to work with you.

  • My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

    My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

    Hello

    Is the printer connected to your PC by USB or network?

    Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

    Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

    Kind regards

    Shlomi

  • HP C3100 All - In - One Photosmart: very old printer and drivers

    I know that probably the answer to this already, but here goes anyway. I have an old printer. HP all-in-One Photosmart C3100. He has just shot ten years old. I had some time after 2006, or at the least, it is the date indicated on the manual.  I just got a new computer to replace my computer that was about as old. I climbed up from XP to Windows 7.

    My printer, which works great, needs a driver and HP does not seem to do more. On their website, they say nothing more than ten years. I have no chance or is there anything else I can do?

    Thank you.

    Here is your support page.

    http://support.HP.com/us-en/product/HP-Photosmart-C3100-all-in-one-printer-series/1146511/drivers

    Click here to find your exact model number and check for the drivers and the software Win 7.

  • can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

    I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

    Thank you

    Hello

    The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
    No matter which compatible OS are registered on the CD...

    A newer version of the software for Windows 7 can be downloaded from the HP site.

    Before installing the software, be sure to follow the steps below:

    1. Enter the control panel > devices and printers.
    2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
    3. Disconnect the USB cable between the printer and restart your PC.
    4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
      http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

    Kind regards

    Shlomi

  • Printer all-in-one Photosmart D110: think there paper jams

    Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy).  This happened for some time.  Sometimes it will print and then at other times, it will produce jam messages when there is not a jam.  I tried all the solutions of HP.

    There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.

    So I'll send more information via the Inbox of (private) messages.

  • Help me buy a new all-in-one which will scan to pdf with preview multipage

    I need a new all-in-one, like the OfficeJet HP 6700 Premium e-all-in-one printer, which I watched in a store.  The box was not clear about the capabilities.

    What I do with old HP all-in-one on an old XP, (11-12 years) old machine is scanning documents to preview multipage PDF, so I can adjust the margins and other things, and if I did not have many PDF files for a multi-page document.  I do this a LOT, I need, it is not a such PITB.    I have not found a way to do this with the printers I have, my new computer so I have to go do it on a slow XP machine in another room.  I can only print at the old printer to my new computer.

    I'm used to using the HP, but those I have is old, my old XP machine (6 years) so it is more reliable and my new computer Windows 7 Professional 64 - bit, and Windows 7 drivers for my old all-in-one are not full function, if they still exist, plus we have several computers and tablets on our network now.   None of the older all-in-one I will do what I need for my new computer, if they'll even install (you look, Dell).

    What I need to know, it's done with Windows 7 on HP OfficeJet 6700 Premium e-all-in-one printer?  (Scan multipage PDF with the HP software preview.) The info on the box was not clear.  If not, is there a model preferably wireless all-in-one that will work for me?  I can plug it into a USB port on my new computer, there are several USB 2.0 and 3.0 ports.  I would like to be able to print wireless from other devices, but this isn't a deal breaker.  I don't want to have to download a few fragmentary shareware or buy a high price to accomplish what I was able to do with the software before HP, on old all-in-one.

    That's what I needed.  Why hell isn't in the ^ & *) & ^ % manual?

    http://support.HP.com/us-en/document/c03584750

  • All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

    Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

    It prints than a very altered, unreadable copy.

    I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

    I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

    Thanks for CAhpUSER respondent

    I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

    The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

    I hope this helps clear things upwards a bit for you

Maybe you are looking for

  • What itunes iphone 6s require

    I am trying to upgrade my Iphone 5s to a 6 s Iphone, only connects through 11.4 Itunes via my Mac running Mac OS x 10.6.8 I won't update my Mac OSX just to connect my phone, if the 6 s Iphone will not work with OS x 10.6.8 so I'm afraid that I will r

  • Help, I need to reinstall windows 95 full version, anyone?

    I have an old IBM Office which will only work for windows 95, can someone tell me where I can get a copy of this please? Thanks in advance

  • 15 - b005eo

    On the form of "HP pavillion ultrabook 15-b005eo" in the "Memory" section, it says the computer this memory 2 x 4 GB installed which is 8GBs of memory total. However on the 'max memory' it says that memory is expandable to 8GBs that means he already

  • BB os 10 (for z10) vs Playbook

    I tried Googling the info but apparently I am getting an error "" BetaZone"data selection" whenever I get to a page that may have information... We would like our game runs on Playbook and BB os 10 (targeting z10) However, these are two separate SDK

  • Registration of 8831 with white keyboards

    We received recently several conference phones 8831 who record well and will ring when it is called, but the keyboards are empty and there is no way to respond, or to use.  We use this PoE.  Has anyone experience this problem?