HP all-in-one printer install software "think" the software is already installed - it is not.
I have a printer all-in-one HP Photosmart C8180, connected via USB directly to my Windows 7 system. Over time I installed, updated and uninstalled the software. At the present time, when I try to install the software is properly run, it did not install the software. If I click on "Advanced" installation option, I see that it "thinks" most of the support software is 'already installed' and it won't install it. I tried to uninstall, but it will not uninstall it (because it is not installed).
I can print fine, I can get the driver installed, but I would like for all supported software must be installed also.
How can I get the installation package to acknowledge that the software is not "already installed".
Hello
Open the content of the CD, run the Uninstall L3. at the bottom of the path...
CD > Util > CCC > uninstall L3.bat
Once it is completed, and then restart the PC and reinstall the S/w.
Kind regards
Jabzi
Help the community by marking this post.
Your question has been answered? Mark it as a accepted Solution!
See a great post? Give it a Bravo!
I work for HP
Tags: HP Printers
Similar Questions
-
Original title: new printer
I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer. The printer works fine when printing from a laptop or ipad!
Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect
If the web page has not correctly detected your operating system, select it by using the drop-down list. Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.
- Click on the ORB start and go into devices and printers.
- Select (click) the icon of your Epson printer.
- Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar. Click on this button.
- Click the "Drivers" tab on the print server properties dialog box.
- Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
- In the context menu, select "Remove driver and driver package" and click OK
- Click Yes, and then delete
- Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
- Install the driver and the software using the file that you downloaded earlier
At this point, your printer should work fine. However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category
-
How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?
Have you looked at the site of Canon?
-
5740 HP e-all-in-one printer: how to change the destination for the scans folder
I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.
Two questions, both assuming I want to use the HP software to scan:
1. is there a way to set a default value of PC to the computer target for digital images?
2. How can I change the folder to which scaned images are sent?
What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?
Any help would be appreciated.
Roy
Hi Roy,
Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer. And Yes, you should be able to do much more PC software rather than on the front panel of the unit. And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan. Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.
I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended. Here is a link where you can get that below. I recommend you to install the latest web downloadable full version for your device first. Then install this
HP extended Scan
FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.
You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended. If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).
-
Hi all
HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)
My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.
Is it possible to implement on this 8600 or am I missing something? Any help or ideas appreciated.
Thank you
Glen
Hi oorwill44,
Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?
Please take a look here: how Scan: Windows XP
I hope this helps, let me know if you have any questions.
Thank you
-
HP All in One printer will communicate with the computer.
Original title: HP PHOTOSMART ALL IN ONE PRINTER C4480
MY COMPUTOR KEEPS TELLING ME IT IS THERE HAS NO COMMUNICATION WITH MY PRINTER, I TRIED TO DOWNLOAD AND INSTALL FROM THE NETWORK DRIVER INSTRUCTIONS TO FIX THIS PROBLEM WITH NO NO SUCSESS I SHOULD THROW THIS PRINTER AND BUY ANOTHER
Hello
· What operating system is installed on your computer?
· What is the exact error message that you receive?
I suggest that you follow the steps in the link and check if that helps:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
You can also check: http://h30434.www3.hp.com/t5/Other-printing-questions/HP-Photosmart-C4480-All-in-One-gives-error-from-HP-Solution/td-p/105711
Printing problems? Try the HP Print Diagnostic Utility
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&DLC=en&LC=en&product=3418705
-
HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network
Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.
I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up. I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.
My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?
Hey @Sue1990,
Welcome to the Forums of HP Support! I hope you enjoy your stay here.
I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.
To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.
Please let me know how it works for you and let me know if you have any questions.
Have a wonderful evening!
If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.
-
Epson Stylus TX121 all-in - One Printer installing do not completely on Windows 7
I could install Scanner and printer Windows XP.
But I can not install the printer in Windows 7. System only to scan and do not know USB port for printer.Could someone help me?
Download you and install the driver scanner for the of Epson TX121? (Note that there is a separate download for the printer and scanner in the link below after clicking on "Support and drivers" near the top right) http://www.Epson.com.Ph/epson_philippines/printers_and_all_in_ones/inkjet/product.page?product_name=Epson_Stylus_TX121#
-
B110a Photosmart All in One printer loading software for Windows 7
Have a new unit but software will open in Vista, but not for Windows 7, try CD, download and also such HP Officejet Pro 8500 A909A recommended by HP centre. Still get fatal error code 08573521 also mentions the MSI file. SCAN. Any body recommend a solution to loading the software for Windows 7-bit
Thank you
Bob
HI - go ahead and try following the steps described in this document. I'm not sure that identifies the specific error, you see, but take a look through the document and it should offer a few suggestions that might solve the problem.
Hope that helps.
-
HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer
I was scanning documents successfully until recently. I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.
Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.
-Restart the program.
-Close all programs that might be using the device.
-Restart the computer.
I tried to download several drivers without success.
Any help would be greatly appreciated.
Hello @kellycc,
Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.
Complete the following steps:
Scrub / uninstall
• Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
• Click continue, click on one of the printers in the list.
• * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
• Click on Uninstall.Reset the printing system
1. click on the Apple icon ( ), then click on System Preferences.
2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.
3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...
4. click on OK to confirm the reset.
5 type the name and the correct password.
6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer
Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...
Repair disk permissions
1. on the Dock, click Applications, then utilities.
2. double-click click disk utility.
3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").
4. click on the button to repair disk permissions at the bottom of the window.
5. once the repair is complete, restart the computer.
Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:
Installation of your printer driver HP and software for Mac OS X
I hope this helps, please let me know the result!
Thank you
-
It says in the guide specifications power:
Power adapter: CQ191-60017
Input voltage: 100-240 VAC
Input frequency: 50/60 Hz
I recently bought the deskjet 3520 printer, printer all in one, but was accepted to school grad to the United Kingdom, I obviously want to take my printer with me but wonder If it will take a power adapter with a UK plug adapter? and if yes where can I get a.
Hello
Yes, but the problem is not different power, you only need an adapter for $ 5 you can find many airports or tourist shops. The problem will be inks. You may not be able to use the ink cartridges sold in the United Kingdom. You should contack HP to reset the printer. Please read this:
http://support.HP.com/us-en/document/c02558798
Kind regards.
-
Deskjet F340 all-in-one printer cannot scan from the solution Center
We had a very short temporary blackout in mid-August. Who put my turn out of service until I could afford a new
power cord. I received the new cord and my PC works fine now. I had to replace my modem because it is finally just
stop working. My printer doesn't not have be reinstalled because I lost some functions when we had the black out.
Now I can only print and copy from the Solution Center. There is no indication in the scanning settings. I can scan if I go to
Scanners and cameras and use Scanner and camera wizard. But it can be a pain. I also can't any alignment
messages after I replaced a printer cartridge. I get the alignment page but no message. It does not seem to line up OK. My
OS is WIN XP Home Ed with SP2. It's on a Everex IMPACT GA3400 PC. My printer uses a USB connection. I think that
some of the files I need for scanning to go from the Center of solutions some how have been removed. But I don't know which ones or
even how to get back them. Any help would be greatly appreciated.
Pleae insert the printer installation CD and contant go through it:
Locate Setup\SolutionCenter\SolutionCenter.msi, right click on the file and click on repair.
Confirm an alert during the installation.
Search now Setup\Scan\Scan.msi, right-click, and then click on repair... to confirm an alert as before.
Restart your PC and launch the HP Solution Center now.
You don't see any change?
-
Anyone know how to solve the problem? I have already turned off the computer - and the new.
Hi LisaB,
You will need to contact support to get this replaced printer. Click on the following link for the number of contacts for technical support for your region.
-
I try the functions on my new 5540 ENVY. Everything is set up and working correctly so far. I just printed a document from my iPad using the WIFI Direct function on the printer successfully. However, the default password on the printer for the WIFI Direct is simply "12345678". Surely, it should be replaced by a more secure password. My friend something printed its iPad - so obviously, this password is not exclusive to me, anyone can print stuff on my printer just for fun and I have a lot of students around me, the problem could become expensive for me and very boring. WIFI Direct signal covers a distance. I contacted HP telephone support, but the process is time consuming and I had to hang up because I had to work. Maybe someone here could give me instructions, and I can change the password when I have free time. I use wifi for internet (cable ethernet only) and the printer connected via USB to the computer. Also, when I turn on my computer (BUT NOT THE ROUTER) on the wireless function, the printer is and what I need to do is enter "12345678" and start printing. There is no guarantee either. Can someone tell me how to change the password for WIFI Direct 5540 envy? Thank you.
I'm sure that you can change the EWS web page for your printer.
-
Buy HP all in one printer and software 6700 wireless installed.
When the printer is turned off my computer continues to try to connect the analysis of the it function. How can I turn this off? I tried the option activate and deactivate the request on manage it to scan Center solution, but continues to turn the wheel to connect next to the slider. Any ideas? When the printer is on but everything works fine, but don't use it much and like to keep off most of the time.
This seems to have worked. Thanks a lot Shane_R.
Maybe you are looking for
-
Updated Airport Extreme 7.7.7 loses cat5 connection
Updated my Airport Extreme 7.7.7 when he upgrading me recommended notified, and I lost all connections of cable cat 5 of my various devices. There was still a wireless connectivity. Downgraded to 7.7.3 and all Ethernet connections restored. Any id
-
As above, I want to keep my current firefox session after I updated to Windows 7
-
M100 satellite disk restore will not work, keeps on rebooting the laptop
Hello I have a M100 I need to restore to out of box state. XP is running too slow and after getting some internet pop ups of facebook, the laptop is having issues. Now, I tried to run the program of restoration of the drive and it happens with ramdis
-
HP 630 Wiresless does not!
It came with Windows 7 Ultimate 64-bit as OS and I then upgraded to 8.1 64-bit Windows and for some reason, the upgrade has deleted drivers ethernet / wireless. I downloaded and installed the two files, but one thing is that the wireless key F12 does
-
Problem with iTunes 12.3.2.35, other titles are visible, but will not play. How can I play? Thank you