HP All in one Printer of 55 G: HP Officejet G 55 connecting to the new computer

Good day for the United Kingdom

I set myself treaties to a new Lenovo desktop.

With the operating system of Windows 8.1.

My old HP Officejet G 55, printer all-in-one is a trust serve for several years and has worked well.

It was no problem and worked well until he presented my my new computer again. The girl seems to be shy or has big problems with his new roommate.  (I guess that driver problems)

The new computer found the printer immediately, but seems to have problems when printing not

print all documents, (some are complete, but several pages do not seem to want to print and it shows an instance of the error.

I visited the site of HP and installed HP support assistance, I ran the printing doctor who finds the printer

poster communicates with my printer, and then it blocks not appearing is not to achieve something.

I guess now you can say I'm a complete novis in the computer (Old boy), which I think is expected a new computer to talk with an old printer. I tried to download the update of drivers, without success, I now ask I am doing the impossible, and I have to go out and buy a new printer?

Any help and advice would be much appreciated

Cordially a boy needing help!

Thanks a lot for your kind reply.

I'll try once more to download and update the printer drivers on the computer,

using your statement. Otherwise, there will always be time to bite the bullet and buy a new printer to date.

Greetings from the United Kingdom

Thegardener

Tags: HP Printers

Similar Questions

  • Just bought a new all in one printer but when I try to scan something I get the error message "JIT debugging of unhandled exception message."

    original title: help needed please...

    I recently bought a new all in one printer and now whenever I try to import something I scanned into my computer in the graphics of MY CRAFT STUDIO program all that I get, it's the exception message not support JIT debugging.

    I tried to disable in Internet Options, but he did not make a difference.  Any help will be greatly appreciated

    Contact support or ask in the forums of the LIM printer software or seller.

  • HP ENVY 7640 all-in-one: print envelopes and its telling me to load paper into the photo tray

    I am trying to print envelopes on the HP ENVY 7640 printer and it tells me to load paper into the photo tray. Have you encountered this problem and how to solve? Thank you.

    Hey @cmm3,

    Welcome to the Forums of HP Support!

    I understand that you have a problem when printing envelopes from your Windows 7 computer to your HP ENVY 7640 e-all-in-one printer. I would like to help you today with correct this print error "Photo tray". To start I have to make sure that the envelope is correctly loaded in your troubleshooting paper tray. Once you have confirmed that your envelope is loaded OK we'll take a look at the envelope to print on your computer settings. Can I please you follow the steps below.

    Step 1: Load the paper:

    To begin troubleshooting, please click here. Once the support document opens, please select the drop down list for "load envelopes. Please see the instructions on the screen to ensure that your envelope is correctly loaded in the paper tray. Once you have confirmed that your envelope is loaded correctly, proceed to the next step.

    Step 2: Check the print settings:

    Below I will provide you with instructions for printing envelopes per word. You should use a different program on your computer to print envelopes, please respond to this post with the program that you are using so I can provide specific measures.

    1. Open Word and click mail merge to top
    2. Select "envelopes" in the upper left side
    3. A page of envelopes and labels should now open. Enter your delivery and return address.
    4. Select 'Options' on the lower right
    5. Under the tab 'Options for envelopes' to ensure that your envelope is correctly selected.
    6. Select the 'Print Options' tab at the top. You must now select as appropriate feeding method for your product.
    7. Make sure that you choose the option "Face down".
    8. Also ensure that 'right-hand Rotation' is selected
    9. At the bottom of the window, select the drop-down list of pet food
    10. Make sure that the feeding method is set to main tray rather then select automatically
    11. Press 'OK' and 'Print'.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • 7780 all in one print via bluetooth from a PC Windows 7, but not the other

    • Our HP 7780 all in one printer is connected to the network via bluetooth and has an ip address of http://192.168.1.65. A Mac and a Windows 7 desktop computer can print on it. An another Windows 7 laptop USED to be able to print, but no longer can, although it can browse to it and see the ink levels.
    • After restarting, the printer status says ready and a new print job appears in the queue, but after a bit it turns into error and never print.
    • We downloaded the base driver and reinstalled. During the installation of the 7780 was on the list of discovered printers and we chose, but during the installation, we got an error message that it could not find the printer.
    • Later we downloaded and installed the patch titled that product stops printing after network installed on Windows 7 (64 bit), rebooted and still the same error.
    • Help! How to be able to print the new Windows 7 laptop!

    The problem was McAfee firewall. First I disabled it, and print worked. Then I restored the default settings of the firewall and print continued to work.

  • HP ENVY 4500 e-all-in-one printer/Mac OS 10.6 / cannot scan multiple pages in the single file/document

    Mac OS X 10.6.8

    HP Scan app 4.4.1

    In the ENVY of HP printer 4500 e-all-in-one support page for scanning with a full feature driver installed. Under "how to scan an original of several page into one file for HP Scan version 4.0 of the software. Everything is okay until after I scanned the documents and click on 'Done '. (Step 6) & click send , click the folder , name your file, and then save the file on the computer. (Step # 7)

    Is where I'm going wrong. I can't find the Format drop-down to complete steps 8 and 9.

    1. Click the dropdown Format menu, select the content , and then check the box to Save all items in a single file .
    2. Click Save .

    Hi milolo,

    Thanks for your post and welcome to the HP Forum.

    Please make sure that you select PDF or searchable PDF as the Format. You should then find a box to check the 'combined in one document.

  • HP laserjet 3030 all-in-one prints only odd characters now that it is connected to parallel cable.

    I have a printer HP laserjet 3030 all-in-one that has worked very well, but the connector broken so I bought a USB2.00 for parallel printer cable pre-mounted to my laptop (I use windows 7) It only prints the weird characters! Help, please.

    I change some settings? I still have the original disc. I hope that this is not a lost cause!

    Hello

    Welcome to the Microsoft community.

    I understand that you are facing the question about printing.

    I will definitely help you with this.

    Have you tried to print the different document?

    I suggest you go through the below methods:

    Method 1: Try to run the printer Troubleshooter:

    1. Press Windows + R key.

    2. Type of Panel, and press ENTER.

    3. Click on troubleshooting.

    4. In the left pane, click View all.

    5. In the list, click the printer and run the troubleshooter.

    Method 2: Try the clean boot:

    A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    I hope this helps. Please post back with the State of the question and we will be happy to help you further.

  • The divers of All in one printer HP 5510 & software will not install, how to find the correct drivers & software?

    I went on hp website just to find that there are no drivers available for download the printer fax copier are all in one and are supposed to be a plug-and-play type device using the USB port however turn on the printer and turn off disconnect the USB cable and reconnect the leaves still the device in operable sometimes that I get a screen that shows that the spores by the printers do not work at other times , I get an indication that Windows Explorer has closed the page down does anyone have an idea what I can do to install the drivers and keep them in place. From time to time I get drivers for the printer all-in-one HP 5510 fax copier scanner installed and then when I run a system scan and clean working files, it deletes the drivers, it may be something I am doing wrong, I don't know if anyone can give me an idea, I would love to appreciate thank you very much.

    Hello

    Download and install a HP 5510 all-in-printer driver and check if it works.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=311255

    Hope this information helps.

    Please let us know if you have any questions.

  • connection problems the new computer mobile printer

    Hi ive boaght a new laptop and im trying to connect my wireless printer but its request for a security key he never asked me for 1 on my old laptop

    Printer model number?  She asked the security key is your routers password SSID for a wireless connection.  This information is in your router that only you have access to.  Under the wireless tab, you should find your SSID, and then the password.  Consult the manual of your itinerary.

  • HP 5510 Photosmart e-All-in-one printer will be no. Longer Print black

    I have a Photosmart HP 5510 e-All-in-one printer and after replacement of a black cartridge empty with a new, the printer will print is darker. I tried all the solutions on HP Support forum.

    I have inserted a new black HP (not a photo black) cartridge, provided it was properly ventilated and put, ran the print head, smear routines and the alignment of ink. I printed the status report (funny because he's white with the exception of a few areas of color). I printed the report quality - the colors were there but not black. I even restored it to factory defaults.

    My WIN7 laptop has the latest HP drivers and wireless printer is turned on and connected, so I guess he can receive firmware updates.

    It becomes even more strange that if I print from a printer (that is, the crossword) embedded applications it print a grey color with muted where (probably), it would be black.

    The printer is 5 months out of warranty...

    I see that a few other people have had the same problem. Is that what someone has solved?

    The steps of cleaning cartridge Print 3 - 4 times.  Try now.

  • Upgrade to Windows OS 8.1 for all-in-one printer, HP Photosmart C4385 of Vista

    My old HP laptop used the Windows Vista operating system. All-in-one printer, HP Photosmart C4385 worked very well. I have a new HP computer that manages the new Windows 8 operating system and I can't load the printing software as the new operating system is incompatible with the printing software. It is certainly another available driver so I can use my all-in-one. Please let me know what the fix is far ahead, but a new printer.

    Hello

    Software for Win 8.1 can be downloaded from the link below.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=3651156

  • can I use XL 364 cartridges in color in my photosmart c309g all-in-one printer?

    My photosmart c309g all-in-one printer has a cartridge black 364 XL and smaller for the colors. Color XL cartridges can be purchased in stores like Media Markt. Color cartrideges XL fits my printer?

    Hello

    Yes, the XL 364 cartridges are compatible with your printer, as you can find below:

    http://support.HP.com/us-en/document/c01842734

    Kind regards

    Shlomi

  • HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    Hello, I have just replaced my XL Black cartridge and was invited to share information with HP on my

    HP Officejet Pro 8600 more e-All-in-One Printer - N911g

    part of this info provide clarification to the HP of the actual amount of draws so I'm really curious to know what is the number of pages, I printed the

    does anyone know a way I can find this info please?

    Thank you

    Touch the front panel and use the arrow to the left if necessary to get to the home screen.  Then tap the droplets of four ink at the top right of the screen and press "Print report".    Articles 12-14 will be the total number of pages, pages in color and print pages without borders.

  • 4380 all-in-one printer does not detect the print cartridge

    My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

    I'm sorry you have a problem with your ink not detected.

    The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

    For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

  • My c5580 all in one printer has a broad black band

    My c5580 all-in-one printer copies or scans have a broad black band along the right side of the paper when the scan or copy.  The scanner glass is clean and it seems that all the scanner bar lights are lit.  The printer prints fine fron the computer.  Scanning the computer shows the same black line

    is broken - is there a solution?

    Dennis811

    dennis811,

    I'm sorry to hear that it worked for you. If you need help with your options maintenance that you can join to support at 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://goo.gl/kQDB - for available options. Let me know if you have any additional questions.

    Good luck!

  • is the 7510 HP e-all in one printer compatible with bluetooth items series?

    Can you send pictures from a mobile phone with bluetooth capability to a HP e - ALL IN ONE printer series 7510?

    Hello

    Your phone uses the different operating system, unfortunately I can't find it in this list:

    http://WWW8.HP.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.HTML?app=TCM:245 - 1044333 & platform = tcm:245 - 1044335

    But you can always send from your phone to your printer.

    Kind regards.

Maybe you are looking for