HP ay503tx: problem of charges windows installation error - no device, driver cannot see HARD drive

I bought the HP ay503tx model that came with the BACK. I downloaded windows 7 x 64 ISO and I got the license with me original. But when I try to install windows 7 via USB it won't let me.

After the boot from USB, it get up to page that says that windows install. and when I press install, it throws an error 'no driver device found ". I can't see any HARD disk where to install fresh windows.

I saw a lot of solutions such as if we were trying on USB 3.0 etc, but nothing helped. Please help me.

Hello:

On the PC with the Intel Skylake chipset like yours, there is no support USB2 and the W7 installation media has no the USB3 support, so you are between a rock and a hard place.

The solution that works for most is to use the tool below to integrate the drivers USB 3 of your installation drive of W7 USB flash media.

There are instructions in the readme on the link below to learn how to use the tool.  It should be run on a PC with W8.1 or W10.

https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

Tags: Notebooks

Similar Questions

  • Windows Installer error - "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected.

    When trying to install a new control software and data package my Hyperion charger I get this error message "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".

    ---------------------

    Troubleshoot Windows install

    2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

    http://support.Microsoft.com/kb/2438651

    Substitute:

    Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

    1. in the menu 'Start', click on ' execute:.»

    2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

    3. in the menu 'Start', click 'run '.

    4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

    Click Start Orb, in the box, type search: Regedit.

    Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

    Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  • I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

    Hello

    I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
    I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
    I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

    Any of you have an idea what can do?
    Thank you!

    Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • When installing iTunes I get a message error "there is a problem with this Windows Installer package. A program required for this install to complete could not run. »

    Windows Installer package error

    When installing iTunes I get a message error "there is a problem with this Windows Installer package. A program required for this install to complete could not run. "I downloaded Windows Installer 4.5, rebooted and tried again with the same results.  How can I fix?

    Hello

    Important The Windows Installer Cleanup (MSICUU2.exe) utility that was previously referred to as in this article has been abandoned. Although the Windows Installer Cleanup utility solved a few problems installing, it sometimes damaged other components that have been installed on the computer. For this reason, the tool has been removed from the Microsoft Download Center. program install and uninstall problem solving

    (http://support.microsoft.com/mats/Program_Install_and_Uninstall)

    is a replacement for this utility.

    "The problems with programs that cannot be installed or uninstalled.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And see if this information helps you install iTunes:

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

    http://support.Apple.com/kb/HT1923

    If the advice already given does not, please contact Apple for assistance.

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    See you soon.

  • iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

    iTunes error update

    I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

    "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

    I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

    I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

    Can anyone help?

    Thank you

    The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

    Ask the question in the Apple Forums:
    https://discussions.Apple.com/index.jspa

  • «Error 1721.There is a problem with this Windows Installer...» "during the installation of Pinnacle Studio 12

    I m PARDEEP SEHGAL of INDIA sir, I tried to install the software of PINALCE STUDIO 12 but despite several attempts, the software could not be installed in Windows XP service pack 2 but version to error message repeated as "error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: PCLE_StudioInit, location: C:-... \Studio.exe, command: /init 'could someone help me out here.

    Hello

    Try the following methods.

    Method 1:

    Download and install the latest Windows install http://www.microsoft.com/download/en/details.aspx?id=8483

    Download WindowsXP-KB942288-v3 - x 86 .exe for Windows XP.

    Method 2:

    Register Windows Installer service; To do this, you need boot mode safe.

    1 restart your computer and press F8 several times before the Windows Logo appears and select Safe Mode and press enter

    2 - log on your user account (must be administrator).

    3 - Click Start, and then select 'Run' or Win Key + R to open the "Run".

    4 - Type cmd and press enter

    5 - in prompt type command sequence,

    msiexec /Unregister and press enter

    msiexec/regserver and press enter

    Close cmd and boot as usual and check the installation.

    Method 3: Run System File Checker

    1-click Start > all programs > Accessories > right click on cmd, select 'Run as administrator'

    2 type the following commands

    sfc /purgecache and press enter and you may be prompted to insert your Windows XP CD-ROM. CD Once completed, you will receive this message Windows File Protection has managed change.

    After this, type this sfc/scannow and press enter and you may be prompted to insert you CD Windows XP CD. This can take some time to check.

    I hope this helps.

  • I get "Error 1720 - there is a problem with this Windows Installer package" when I try to install Verizon MIFI on my desktop

    Original title: Error 1720 - CustomForInUsePortersNo_UI_Upgrade...

    I am trying to install a Verizon MIFI on my desktop and am getting error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact... Following that is a CheckForInUsePortsNO_UI_Upgrade. and then a string of digits, letters and notes. I came here looking for the answer and what I found I have to access the internet from the desktop computer requiring the difficulty to obtain the fix. I need help including the patch and how to obtain the fix my laptop on my desk. Thank you very much for your advice. Robert

    Hi Robert,.
     
    I suggest that you do the following and check to see if they help.
     
    Step 1:
     
    Temporarily disable all security software and check if the problem persists.
     
     
    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Step 2:
     
    If this does not work, try installing Windows Installer 4.5 from the link below and check if you are able to install Verizon MIFI.
     
    Windows Installer 4.5 is available
    http://support.Microsoft.com/default.aspx/KB/942288
     
    Step 3:
     
    Make the SFC scan on your machine to repair or recover system files.
     
    Step 4:
     
    Create a new user account and try to install Verizon MIFI.
     
    If none of the steps to help, please contact Verizon support .

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Error 1723. There is a problem with this Windows Installer package

    IM new here and do not know how to make a thread
    and this problem I had all the time when Im trying to download ' ' Java '.
    Error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.
    And I got Windows 7

    Hello 4itr,

    Thanks for posting on the Microsoft answers Forum.

    Try to remove Java using the Windows Cleanup utility. Click here for a link to the Windows Installer Cleanup tool.
    You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

    After it is removed, restart your computer and then try to install the latest version of Java. If this fails, contact Java for additional help. www.Java.com
    You can also look at this article from Java.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • 1721.there error is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

    Hello!
    I tried to install a copy of Symantec Corporate Edition Antivirus software but despite several attempts the software could not be installed in Windows 7 Home Basic Edition version but get error message repeated as "error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. "
    Could someone help me out here.
    Thank you

    Hello CBhaskar,

    Thanks for posting on the Microsoft answers Forum.

    If the information of Gokul has not helped to solve your problem, then I suggest that you use the Windows Installer Cleanup tool.
    There may be a corrupt installation, you need to delete everything first.
    Click here for a link to download the utility from Microsoft.

    You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

    If please reply back and let us know if this helps solve your problem or if you still need help.

    Sincerely, Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Download the new version of iTunes, error 'there is a problem with this Windows Installer package... »

    Original title: Updateing iTunes

    I get the message to download the new version of iTunes.  Whenever I've done, it is unable to complete and gives me the following error.

    There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package.

    When you have uninstalled iTunes, did you only use Control Panel > programs and features, or did you follow the instructions here--> https://support.apple.com/en-us/HT204275

    If you uninstall everything as described in the document, and then do the installation should work.

    See also https://discussions.apple.com/docs/DOC-3551

    If you have problems to uninstall the Apple software, see https://support.microsoft.com/en-us/mats/program_install_and_uninstall?wa=wsignin1.0

    And if you still have problems to uninstall the Apple software, see http://www.revouninstaller.com/revo_uninstaller_free_download.html (use the free version).

  • Error message: "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    Original title: problem with the Windows Installer Package

    I am trying to install an update for my video FlipShare program and I get the following error message "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Anyone has any ideas to fix this?

    Would be - what your anti-virus program blocks scripts? See:

    Error a Script required for this install to Complete could not be run when you run a Microsoft Fix it Solution! -Microsoft Fix it BLOG - Site Home - TechNet Blogs:
    http://blogs.technet.com/b/fixit4me/archive/2009/03/31/error-a-script-required-for-this-install-to-complete-could-not-be-run-when-running-a-Microsoft-fix-it-solution.aspx

    Ramesh Srinivasan . The Winhelponline Blog
    Microsoft MVP, Windows desktop experience

  • I can't download the new iTunes update, the error message say "is there a problem with this Windows Installer package."

    I can't download the new itunes update.  Error message says "there is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your supplier of staff or the package of support ".
    I was running itunes perfectly well before trying to download this update.  ITunes is not yet available.
    Original title: update iTunes Application program compatibility

    Thanks for your help.  Unfortunately no idea worked.  Windows Installer 4.5 is not good for Windows 7.  However, I was able to restore my computer to an earlier date and the previous itunes was there.  It still would not allow me to access without security clearance, but I finally understood how to afford access - I am the administrator and the only user - go figure!
    Thanks again.

  • Get error 1723 - there is a problem with the Windows Installer package

    Hi, I have problems with the .msi files. An example of this would be logmein hamachi. It would be me with error 1723. There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package. What should I do? I am currently using windows 8 pro with media Center. my windows installer is the installation of Windows® program. V 5.0.9200.16384. Thank you

    I had the same problem. The solution is to go into c:\users\"username"\AppData\Local\ and then right click on 'temp' and choose 'properies. Choose 'security'--> edit--> add and add the user name, you use and you give all the rights. After that, it will work :)

    Good luck!
  • try to install microsoft applocale gives the error: "There is a problem with this Windows Installer package"

    Microsoft applocale

    I tried to install this microsoft applocale. But I can't install it successfully. It showed "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    What can I do to install microsoft applocale?

    Thank you.

    AppLocale can be installed on WIndows Server 2003 and Windows XP.

    See "Important notes" on http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=13209

  • Error: "there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider staff or the support package' when trying to install iTunes on Windows 7

    Original title: DLL required for uninstall and install iTunes?
    I get this message: there is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your provider to support personal or package.

    I can't install and uninstall iTunes no matter what I do. Help, please!

     
    Hi stjimmy9999,
     
    1. are you able to install other programs on the computer?
    2. what version of iTunes you are trying to install?
    3. have you SpyCatcher program installed on the computer?
     
    Program SpyCatcher interrupts the Windows Installer to not save the files during the installation of iTunes.
     
    Try these steps and check the result.
    Step 1: Download the latest version of iTunes
    a. visit http://www.apple.com/itunes/download/
    b. click on 'Download Now' and save the file to the desktop.
     
    Step 2: Install the program as an administrator by disabling all programs currently running on the computer, non-Microsoft
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
    c. restart the computer and right click on the Setup file of iTunes, right-click on the file and click Properties.
    d. click on the Compatibility tab and place a check on "Run this program as Administrator" under "privilege level".
    e. click ok to apply the changes.
    f. open the file and install it.
    g. Article, follow "step 7: reset the computer to start as usual.
     
    For more information on installing iTunes, see the following article: difficulties to install iTunes or QuickTime for Windows
    For further assistance with this, please ask a question about iTunes Forum

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for